lkml.org 
[lkml]   [2013]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/2] ARM: dts: omap5-uevm: remove always_on, boot_on from smps10_out1
From
On Fri, Oct 11, 2013 at 1:13 AM, Kishon Vijay Abraham I <kishon@ti.com> wrote:
>
>> regulator-boot-on indicates that PMIC enables it by default as part of
>> OTP or some internal behavior -> Looking at the measurements done on
>> uEVM and OTP information -> regulator-boot-on should be kept here.
>
> No. Actually I don’t want PMIC to enable it by default. I want the palmas-usb
> driver to handle it.
> Enabling it by default makes palmas-usb to detect VBUS interrupt. This should
> ideally be detected only when you connect a host cable.
> Btw I didn't exactly get why you want regulator-boot-on should be kept here.

binding description states:
- regulator-boot-on: bootloader/firmware enabled regulator
Further info: include/linux/regulator/machine.h
* @boot_on: Set if the regulator is enabled when the system is initially
* started. If the regulator is not enabled by the hardware or
* bootloader then it will be enabled when the constraints are
* applied.

What that means is that it is enabled by firmware/bootloader (in our
case One Time Program {OTP} inside Palmas) when the system switches on
even before the kernel starts. and we know SMPS10 is autoenabled by
Palmas OTP configuration even before first instruction in A15
executes.

I think you misunderstand this to mean that you'd like the regulator
to be *switched on* automatically at kernel boot by regulator
framework - there is no reasoning why we'd want such a binding since
we'd expect drivers to do their job of requesting and enabling
regulators on need..

Hope this helps. Let me know if I misunderstood something here.

Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-10-11 09:21    [W:0.132 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site