lkml.org 
[lkml]   [2013]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[ 119/135] ARM: tegra: unify Tegras Kconfig a bit more
Date
3.11-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Warren <swarren@nvidia.com>

commit 20984c44b5a08620778ea14fa5807489170fd5ca upstream.

Move all common select clauses from ARCH_TEGRA_*_SOC to ARCH_TEGRA to
eliminate duplication. The USB-related selects all should have been
common too, but were missing from Tegra114 previously. Move these to
ARCH_TEGRA too. The latter fixes a build break when only Tegra114
support was enabled, but not Tegra20 or Tegra30 support.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reported-by: Paul Walmsley <pwalmsley@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
arch/arm/mach-tegra/Kconfig | 21 ++++++---------------
1 file changed, 6 insertions(+), 15 deletions(-)

--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -2,18 +2,24 @@ config ARCH_TEGRA
bool "NVIDIA Tegra" if ARCH_MULTI_V7
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
+ select ARM_GIC
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select CLKSRC_OF
select COMMON_CLK
+ select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if LOCAL_TIMERS
select HAVE_CLK
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
+ select PINCTRL
select SOC_BUS
select SPARSE_IRQ
+ select USB_ARCH_HAS_EHCI if USB_SUPPORT
+ select USB_ULPI if USB_PHY
+ select USB_ULPI_VIEWPORT if USB_PHY
select USE_OF
help
This enables support for NVIDIA Tegra based systems.
@@ -27,15 +33,9 @@ config ARCH_TEGRA_2x_SOC
select ARM_ERRATA_720789
select ARM_ERRATA_754327 if SMP
select ARM_ERRATA_764369 if SMP
- select ARM_GIC
- select CPU_V7
- select PINCTRL
select PINCTRL_TEGRA20
select PL310_ERRATA_727915 if CACHE_L2X0
select PL310_ERRATA_769419 if CACHE_L2X0
- select USB_ARCH_HAS_EHCI if USB_SUPPORT
- select USB_ULPI if USB_PHY
- select USB_ULPI_VIEWPORT if USB_PHY
help
Support for NVIDIA Tegra AP20 and T20 processors, based on the
ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
@@ -44,14 +44,8 @@ config ARCH_TEGRA_3x_SOC
bool "Enable support for Tegra30 family"
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
- select ARM_GIC
- select CPU_V7
- select PINCTRL
select PINCTRL_TEGRA30
select PL310_ERRATA_769419 if CACHE_L2X0
- select USB_ARCH_HAS_EHCI if USB_SUPPORT
- select USB_ULPI if USB_PHY
- select USB_ULPI_VIEWPORT if USB_PHY
help
Support for NVIDIA Tegra T30 processor family, based on the
ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
@@ -59,10 +53,7 @@ config ARCH_TEGRA_3x_SOC
config ARCH_TEGRA_114_SOC
bool "Enable support for Tegra114 family"
select HAVE_ARM_ARCH_TIMER
- select ARM_GIC
select ARM_L1_CACHE_SHIFT_6
- select CPU_V7
- select PINCTRL
select PINCTRL_TEGRA114
help
Support for NVIDIA Tegra T114 processor family, based on the



\
 
 \ /
  Last update: 2013-10-11 22:21    [W:0.598 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site