lkml.org 
[lkml]   [2013]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 2/5] clk: tegra: Add periph regs bank X
On Fri, Oct 04, 2013 at 12:12:41PM +0300, Peter De Schrijver wrote:
> Tegra124 has an extra bank of peripheral clock registers. Add it to the
> generic peripheral clock code.
>
> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
> ---
> drivers/clk/tegra/clk.c | 10 ++++++++++
> 1 files changed, 10 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/clk/tegra/clk.c b/drivers/clk/tegra/clk.c
> index c8c84ce..0240dc3 100644
> --- a/drivers/clk/tegra/clk.c
> +++ b/drivers/clk/tegra/clk.c
> @@ -57,6 +57,8 @@
> #define RST_DEVICES_CLR_V 0x434
> #define RST_DEVICES_SET_W 0x438
> #define RST_DEVICES_CLR_W 0x43c
> +#define RST_DEVICES_SET_X 0x290
> +#define RST_DEVICES_CLR_X 0x294

Perhaps sort these numerically rather than alphabetically? Also I don't
see where the CLK_OUT_ENB_X, CLK_OUT_ENB_{SET,CLR}_X or RST_DEVICES_X
registers are defined. Perhaps they were part of some other patch or a
series that this depends on?

>
> /* Global data of Tegra CPU CAR ops */
> static struct tegra_cpu_car_ops dummy_car_ops;
> @@ -109,6 +111,14 @@ static struct tegra_clk_periph_regs periph_regs[] = {
> .rst_set_reg = RST_DEVICES_SET_W,
> .rst_clr_reg = RST_DEVICES_CLR_W,
> },
> + [5] = {
> + .enb_reg = CLK_OUT_ENB_X,
> + .enb_set_reg = CLK_OUT_ENB_SET_X,
> + .enb_clr_reg = CLK_OUT_ENB_CLR_X,
> + .rst_reg = RST_DEVICES_X,
> + .rst_set_reg = RST_DEVICES_SET_X,
> + .rst_clr_reg = RST_DEVICES_CLR_X,
> + },
> };

Thierry
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2013-10-10 13:01    [W:0.098 / U:1.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site