lkml.org 
[lkml]   [2013]   [Oct]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/7] arm: dts: dra7: add bandgap entry
On 14:32-20131001, Eduardo Valentin wrote:
> This patch adds bandgap IP entry on DRA7 dtsi device tree file.
>
> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
> ---
> arch/arm/boot/dts/dra7.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index 3a746c2..4e9b159 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -53,6 +53,18 @@
> };
> };
>
> + bandgap: bandgap {
would you like to follow bandgap: bandgap@4a0021e0 convention?
Also, could you move it under ocp?
I already commented about this previously here:
https://lkml.org/lkml/2013/9/27/300

> + reg = <0x4a0021e0 0xc
> + 0x4a00232c 0xc
> + 0x4a002380 0x2c
> + 0x4a0023C0 0x3c
> + 0x4a002564 0x8
> + 0x4a002574 0x50>;
> + compatible = "ti,dra752-bandgap";
> + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
> + #thermal-sensor-cells = <1>;
> + };
> +
> gic: interrupt-controller@48211000 {
> compatible = "arm,cortex-a15-gic";
> interrupt-controller;
--
Regards,
Nishanth Menon


\
 
 \ /
  Last update: 2013-10-02 01:01    [W:0.900 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site