lkml.org 
[lkml]   [2013]   [Oct]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 07/20] Documentation: dt: iio: Add binding for LPS001WP
On 09/16/13 17:02, Lee Jones wrote:
> LPS001WP is a Pressure and Temperature sensor.
>
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Hi Lee,

I'm planning to drop this set of bindings in favour of the unified ones
proposed by Lukasz Czerwinski.

Could you take a look at those and perhaps propose the additional bits and pieces
needed to ensure everything is covered by the resulting files?

Thanks,

Jonathan
> ---
> .../devicetree/bindings/iio/pressure/lps001wp.txt | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/pressure/lps001wp.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/pressure/lps001wp.txt b/Documentation/devicetree/bindings/iio/pressure/lps001wp.txt
> new file mode 100644
> index 0000000..45cb45c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/pressure/lps001wp.txt
> @@ -0,0 +1,21 @@
> +* STMicroelectronics Pressure Sensor
> +
> +Required properties:
> + - compatible: Should be "st,lps001wp"
> + - reg: The I2C address of the sensor
> +
> +Optional properties:
> + - vdd-supply: Phandle to the Vdd supply regulator
> + - vddio-supply: Phandle to the Vdd-IO supply regulator
> +
> +Example:
> +
> +i2c@80128000 {
> + lps001wp@5c {
> + compatible = "st,lps001wp";
> + reg = <0x5c>;
> +
> + vdd-supply = <&ab8500_ldo_aux1_reg>;
> + vddio-supply = <&db8500_vsmps2_reg>;
> + };
> +};
>


\
 
 \ /
  Last update: 2013-10-01 22:21    [W:0.214 / U:2.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site