lkml.org 
[lkml]   [2013]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[ 44/47] drivers/rtc/rtc-vt8500.c: correct handling of CR_24H bitfield
Date
3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tony Prisk <linux@prisktech.co.nz>

commit 532db570e5181abc8f4f7bfa6c77c69ec2240198 upstream.

Control register bitfield for 12H/24H mode is handled incorrectly.
Setting CR_24H actually enables 12H mode. This patch renames the define
and changes the initialization code to correctly set 24H mode.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Cc: Edgar Toernig <froese@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/rtc/rtc-vt8500.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/rtc/rtc-vt8500.c
+++ b/drivers/rtc/rtc-vt8500.c
@@ -69,7 +69,7 @@
| ALARM_SEC_BIT)

#define VT8500_RTC_CR_ENABLE (1 << 0) /* Enable RTC */
-#define VT8500_RTC_CR_24H (1 << 1) /* 24h time format */
+#define VT8500_RTC_CR_12H (1 << 1) /* 12h time format */
#define VT8500_RTC_CR_SM_ENABLE (1 << 2) /* Enable periodic irqs */
#define VT8500_RTC_CR_SM_SEC (1 << 3) /* 0: 1Hz/60, 1: 1Hz */
#define VT8500_RTC_CR_CALIB (1 << 4) /* Enable calibration */
@@ -246,7 +246,7 @@ static int __devinit vt8500_rtc_probe(st
}

/* Enable RTC and set it to 24-hour mode */
- writel(VT8500_RTC_CR_ENABLE | VT8500_RTC_CR_24H,
+ writel(VT8500_RTC_CR_ENABLE,
vt8500_rtc->regbase + VT8500_RTC_CR);

vt8500_rtc->rtc = rtc_device_register("vt8500-rtc", &pdev->dev,



\
 
 \ /
  Last update: 2013-01-10 01:21    [W:0.266 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site