lkml.org 
[lkml]   [2013]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] HID: i2c-hid: add ACPI support
On Wed, Jan 09, 2013 at 11:38:24AM +0100, Benjamin Tissoires wrote:
> >
> > If they have reset GPIO or something like that, how else we should we
> > handle this if not in the driver? The i2c-hid core doesn't know for what
> > purpose a given GPIO line is.
>
> But the hid protocol aims at reducing the number of drivers. The idea
> is to built one driver to rule them all... :)
> Some stats:
> - hid-multitouch (the driver that drives multitouch screens) has a
> list of ~80 registered products, most of them are USB (few are
> Bluetooth). Bonus point, this list is not exhaustive because there is
> an auto-detection mechanism in place which forwards unknown
> mt-touchscreen to hid-multitouch. Now with i2c-hid, hid-multitouch can
> also handle any Win8 certified i2c touchscreen, so I guess it will add
> a lot of new devices to this list.
> - hid-core registered ~240 exception -> it means that on all existing
> input devices that follow the hid protocol, only 240 need special
> handling.

OK, got it :)

> So my point is that some of the hid drivers may know the attached
> GPIOs, but the generic hid drivers (hid-multitouch, hid-generic and
> hid-core then) won't.

OK.

> Anyway, there may be adjustments at the beginning, but I still think
> we could add a common place for i2c quirks in i2c-hid, at least at the
> beginning.

Sure.

I noticed that the current i2c-hid code doesn't handle the GPIOs at all
right now (even if not enumerated form ACPI) so we need to invent something
once real hardware starts to be available. I have few devices here but they
are unusable (except the enumeration parts) as they need some FW which I
don't have yet.

> The best solution would be to be able to deduce the behavior of those
> GPIOs thanks to the ACPI description. Problem for me: I can't have
> access to the document referred in HID over i2c specification (Windows
> ACPI Design Guide for SOC Platform) while working at Red Hat...
>
> >
> > i2c-hid core can handle the GPIO interrupt if client->irq is not set (by
> > converting the GPIO into interrupt number and passing it to the hid
> > driver). I didn't implement that because we have the client->irq already
> > set so I can't test this.
>
> But this part of the code is already in ACPI i2c enumeration, right?
> So why you want to rewrite it in i2c-hid?

No, the ACPI I2C enumeration only handles Interrupt and IRQ resources. It
doesn't handle the GpioInt resources and this needs to be done in i2c-hid.

> >
> >> The closest thing which is already in the kernel tree is the handling
> >> of device specific quirks in usbhid. We may be forced to do such a
> >> thing if the DSDT is not explicit enough to guess the right behavior
> >> (how to trigger the reset line, etc..)
> >>
> >> Also, I missed one point in my previous review:
> >>
> >> >
> >> >> Please note that I can only compare this to my patch, based on the
> >> >> DSDT example Microsoft gave in its spec. So sorry if I'm asking
> >> >> useless things, but I like to understand... :)
> >> >> Here are a few comments:
> >> >>
> >> >> >
> >> >> > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> >> >> > ---
> >> >> > drivers/hid/i2c-hid/i2c-hid.c | 73 +++++++++++++++++++++++++++++++++++++++--
> >> >> > 1 file changed, 71 insertions(+), 2 deletions(-)
> >> >> >
> >> >> > diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
> >> >> > index 9ef22244..b2eebb6 100644
> >> (...snipped...)
> >>
> >> >> > +
> >> >> > + pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
> >>
> >> Here, I don't think mixing devm_* and regular allocations is a good thing.
> >> I know it's a pain, but at the time I wrote the driver, the input
> >> layer was not devm-ized, so I was not able to use devm allocs. Now it
> >> should be feasible, but I didn't found the time to do it.
> >> So I'm afraid, this allocation must use a regular kwalloc and it
> >> should be freed somewhere later, until we devm-ize the whole module.
> >
> > Good point.
> >
> > I was thinking to embed the platform data in the i2c_hid structure so that
> > it gets allocated at the same time as ihid and then we can handle setting
> > the platform data like:
> >
> > if (!platform_data) {
> > ret = i2c_hid_acpi_pdata(client, &ihid->pdata);
> > /* handle error */
> > } else {
> > ihid->pdata = *platform_data;
> > }
> >
> > Does that sound feasible to you?
>
> yep, go for it!

Thanks. I'll prepare next version and send it out for review soon.


\
 
 \ /
  Last update: 2013-01-09 12:41    [W:0.041 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site