lkml.org 
[lkml]   [2013]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 2/3] acpi, memory-hotplug: Extend movablemem_map ranges to the end of node.
On Fri, 25 Jan 2013 17:42:08 +0800
Tang Chen <tangchen@cn.fujitsu.com> wrote:

> When implementing movablemem_map boot option, we introduced an array
> movablemem_map.map[] to store the memory ranges to be set as ZONE_MOVABLE.
>
> Since ZONE_MOVABLE is the latst zone of a node, if user didn't specify
> the whole node memory range, we need to extend it to the node end so that
> we can use it to prevent memblock from allocating memory in the ranges
> user didn't specify.
>
> We now implement movablemem_map boot option like this:
> /*
> * For movablemem_map=nn[KMG]@ss[KMG]:
> *
> * SRAT: |_____| |_____| |_________| |_________| ......
> * node id: 0 1 1 2
> * user specified: |__| |___|
> * movablemem_map: |___| |_________| |______| ......
> *
> * Using movablemem_map, we can prevent memblock from allocating memory
> * on ZONE_MOVABLE at boot time.
> *
> * NOTE: In this case, SRAT info will be ingored.
> */
>

The patch generates a bunch of rejects, partly due to linux-next
changes but I think I fixed everything up OK.

> index 4ddf497..f841d0e 100644
> --- a/arch/x86/mm/srat.c
> +++ b/arch/x86/mm/srat.c
> @@ -141,11 +141,16 @@ static inline int save_add_info(void) {return 1;}
> static inline int save_add_info(void) {return 0;}
> #endif
>
> +#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
> +extern struct movablemem_map movablemem_map;
> +#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */

Well.

a) we shouldn't put extern declarations in C files - put them in
headers so we can be assured that all compilation units agree on the
type.

b) the ifdefs are unneeded - a unused extern declaration is OK (as
long as the type itself is always defined!)

c) movablemem_map is already declared in memblock.h.

So I zapped the above three lines.

> @@ -178,9 +185,57 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
>
> node_set(node, numa_nodes_parsed);
>
> - printk(KERN_INFO "SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]\n",
> + printk(KERN_INFO "SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx] %s\n",
> node, pxm,
> - (unsigned long long) start, (unsigned long long) end - 1);
> + (unsigned long long) start, (unsigned long long) end - 1,
> + hotpluggable ? "Hot Pluggable": "");
> +
> +#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
> + int overlap;
> + unsigned long start_pfn, end_pfn;

no, we don't put declarations of locals in the middle of C statements
like this:

arch/x86/mm/srat.c: In function 'acpi_numa_memory_affinity_init':
arch/x86/mm/srat.c:185: warning: ISO C90 forbids mixed declarations and code

Did your compiler not emit this warning?

I fixed this by moving the code into a new function
"handle_movablemem". Feel free to suggest a more appropriate name!


From: Andrew Morton <akpm@linux-foundation.org>
Subject: acpi-memory-hotplug-extend-movablemem_map-ranges-to-the-end-of-node-fix

clean up code, fix build warning

Cc: "Brown, Len" <len.brown@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wu Jianguo <wujianguo@huawei.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

arch/x86/mm/srat.c | 93 ++++++++++++++++++++++---------------------
1 file changed, 49 insertions(+), 44 deletions(-)

diff -puN arch/x86/mm/srat.c~acpi-memory-hotplug-extend-movablemem_map-ranges-to-the-end-of-node-fix arch/x86/mm/srat.c
--- a/arch/x86/mm/srat.c~acpi-memory-hotplug-extend-movablemem_map-ranges-to-the-end-of-node-fix
+++ a/arch/x86/mm/srat.c
@@ -142,50 +142,8 @@ static inline int save_add_info(void) {r
#endif

#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
-extern struct movablemem_map movablemem_map;
-#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
-
-/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
-int __init
-acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
+static void __init handle_movablemem(int node, u64 start, u64 end)
{
- u64 start, end;
- u32 hotpluggable;
- int node, pxm;
-
- if (srat_disabled())
- goto out_err;
- if (ma->header.length != sizeof(struct acpi_srat_mem_affinity))
- goto out_err_bad_srat;
- if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0)
- goto out_err;
- hotpluggable = ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE;
- if (hotpluggable && !save_add_info())
- goto out_err;
-
- start = ma->base_address;
- end = start + ma->length;
- pxm = ma->proximity_domain;
- if (acpi_srat_revision <= 1)
- pxm &= 0xff;
-
- node = setup_node(pxm);
- if (node < 0) {
- printk(KERN_ERR "SRAT: Too many proximity domains.\n");
- goto out_err_bad_srat;
- }
-
- if (numa_add_memblk(node, start, end) < 0)
- goto out_err_bad_srat;
-
- node_set(node, numa_nodes_parsed);
-
- printk(KERN_INFO "SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx] %s\n",
- node, pxm,
- (unsigned long long) start, (unsigned long long) end - 1,
- hotpluggable ? "Hot Pluggable": "");
-
-#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
int overlap;
unsigned long start_pfn, end_pfn;

@@ -229,7 +187,54 @@ acpi_numa_memory_affinity_init(struct ac
*/
insert_movablemem_map(start_pfn, end_pfn);
}
-#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+}
+#else /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+static inline void handle_movablemem(int node, u64 start, u64 end)
+{
+}
+#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+
+/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
+int __init
+acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
+{
+ u64 start, end;
+ u32 hotpluggable;
+ int node, pxm;
+
+ if (srat_disabled())
+ goto out_err;
+ if (ma->header.length != sizeof(struct acpi_srat_mem_affinity))
+ goto out_err_bad_srat;
+ if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0)
+ goto out_err;
+ hotpluggable = ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE;
+ if (hotpluggable && !save_add_info())
+ goto out_err;
+
+ start = ma->base_address;
+ end = start + ma->length;
+ pxm = ma->proximity_domain;
+ if (acpi_srat_revision <= 1)
+ pxm &= 0xff;
+
+ node = setup_node(pxm);
+ if (node < 0) {
+ printk(KERN_ERR "SRAT: Too many proximity domains.\n");
+ goto out_err_bad_srat;
+ }
+
+ if (numa_add_memblk(node, start, end) < 0)
+ goto out_err_bad_srat;
+
+ node_set(node, numa_nodes_parsed);
+
+ printk(KERN_INFO "SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx] %s\n",
+ node, pxm,
+ (unsigned long long) start, (unsigned long long) end - 1,
+ hotpluggable ? "Hot Pluggable": "");
+
+ handle_movablemem(node, start, end);

return 0;
out_err_bad_srat:
diff -puN include/linux/mm.h~acpi-memory-hotplug-extend-movablemem_map-ranges-to-the-end-of-node-fix include/linux/mm.h
diff -puN mm/page_alloc.c~acpi-memory-hotplug-extend-movablemem_map-ranges-to-the-end-of-node-fix mm/page_alloc.c
_


\
 
 \ /
  Last update: 2013-01-26 02:21    [W:0.094 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site