lkml.org 
[lkml]   [2013]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 18/19] ARM: at91: suspend both memory controllers on at91sam9263
Date
For the past three years, we have had a #warning in
mach-at91 about the sdram_selfrefresh_enable or
at91sam9_standby functions possibly not working on
at91sam9263. In the meantime a function was added
to do the right thing on at91sam9g45, which looks like
it should also work on '9263.

This patch blindly removes the warning and changes the
at91sam9263 to use the same code at at91sam9g45, which
may or may not be the right solution. If it is not,
maybe someone could provide a better fix.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
---
arch/arm/mach-at91/cpuidle.c | 2 +-
arch/arm/mach-at91/pm.c | 2 +-
arch/arm/mach-at91/pm.h | 8 --------
3 files changed, 2 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
index 0c63815..208d486 100644
--- a/arch/arm/mach-at91/cpuidle.c
+++ b/arch/arm/mach-at91/cpuidle.c
@@ -36,7 +36,7 @@ static int at91_enter_idle(struct cpuidle_device *dev,
{
if (cpu_is_at91rm9200())
at91rm9200_standby();
- else if (cpu_is_at91sam9g45())
+ else if (cpu_is_at91sam9g45() || cpu_is_at91sam9263())
at91sam9g45_standby();
else
at91sam9_standby();
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index adb6db8..f6bd4fa 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -265,7 +265,7 @@ static int at91_pm_enter(suspend_state_t state)
*/
if (cpu_is_at91rm9200())
at91rm9200_standby();
- else if (cpu_is_at91sam9g45())
+ else if (cpu_is_at91sam9g45() || cpu_is_at91sam9263())
at91sam9g45_standby();
else
at91sam9_standby();
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 38f467c..5252216 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -70,14 +70,6 @@ static inline void at91sam9g45_standby(void)
at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
}

-#ifdef CONFIG_SOC_AT91SAM9263
-/*
- * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
- * handle those cases both here and in the Suspend-To-RAM support.
- */
-#warning Assuming EB1 SDRAM controller is *NOT* used
-#endif
-
static inline void at91sam9_standby(void)
{
u32 saved_lpr, lpr;
--
1.8.0


\
 
 \ /
  Last update: 2013-01-25 23:22    [W:0.252 / U:9.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site