lkml.org 
[lkml]   [2013]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4 v11] clk, highbank: Prevent glitches in non-bypass reset mode
Date
The highbank clock will glitch with the current code if the
clock rate is reset without relocking the PLL. Program the PLL
correctly to prevent glitches.

Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
---
Changes from v6, v7, v8, v9, v10
None.
Changes from v5
Added Mike Turquette's ack.
Changes from v4
None.
Changes from v3
Changelog text and patch name now correspond to the actual patch.
was clk, highbank: remove non-bypass reset mode.
Changes from v2
None.
Changes from v1
Removed erroneous reformating.

drivers/clk/clk-highbank.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/clk/clk-highbank.c b/drivers/clk/clk-highbank.c
index 52fecad..3a0b723 100644
--- a/drivers/clk/clk-highbank.c
+++ b/drivers/clk/clk-highbank.c
@@ -182,8 +182,10 @@ static int clk_pll_set_rate(struct clk_hw *hwclk, unsigned long rate,
reg |= HB_PLL_EXT_ENA;
reg &= ~HB_PLL_EXT_BYPASS;
} else {
+ writel(reg | HB_PLL_EXT_BYPASS, hbclk->reg);
reg &= ~HB_PLL_DIVQ_MASK;
reg |= divq << HB_PLL_DIVQ_SHIFT;
+ writel(reg | HB_PLL_EXT_BYPASS, hbclk->reg);
}
writel(reg, hbclk->reg);

--
1.7.11.7


\
 
 \ /
  Last update: 2013-01-25 21:23    [W:0.561 / U:15.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site