lkml.org 
[lkml]   [2013]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 06/11] usb: dwc3-omap: Minor fixes to get dt working
Date
Includes few minor fixes in dwc3-omap like populating the compatible
string in a correct way, extracting the utmi-mode property properly and
changing the index of get_irq since irq of core is removed from hwmod
entry.
Also updated the documentation with dwc3-omap device tree binding
information.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
Documentation/devicetree/bindings/usb/omap-usb.txt | 28 ++++++++++++
drivers/usb/dwc3/dwc3-omap.c | 45 +++++++++-----------
2 files changed, 49 insertions(+), 24 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index 90360e3..0177371 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -43,6 +43,34 @@ Board specific device node entry
power = <50>;
};

+OMAP DWC3 GLUE
+ - compatible : Should be "ti,dwc3"
+ - ti,hwmods : Should be "usb_otg_ss"
+ - reg : Address and length of the register set for the device.
+ - interrupts : The irq number of this device that is used to interrupt the
+ MPU
+ - #address-cells, #size-cells : Must be present if the device has sub-nodes
+ - utmi-mode : controls the source of UTMI/PIPE status for VBUS and OTG ID.
+ It should be set to "1" for HW mode and "2" for SW mode.
+ - ranges: the child address space are mapped 1:1 onto the parent address space
+
+Sub-nodes:
+The dwc3 core should be added as subnode to omap dwc3 glue.
+- dwc3 :
+ The binding details of dwc3 can be found in:
+ Documentation/devicetree/bindings/usb/dwc3.txt
+
+omap_dwc3 {
+ compatible = "ti,dwc3";
+ ti,hwmods = "usb_otg_ss";
+ reg = <0x4a020000 0x1ff>;
+ interrupts = <0 93 4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <2>;
+ ranges;
+};
+
OMAP CONTROL USB

Required properties:
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 831b75f..cc2ccba 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -318,11 +318,11 @@ static int dwc3_omap_probe(struct platform_device *pdev)
struct resource *res;
struct device *dev = &pdev->dev;

- int size;
int ret = -ENOMEM;
int irq;

- const u32 *utmi_mode;
+ int utmi_mode;
+
u32 reg;

void __iomem *base;
@@ -336,13 +336,13 @@ static int dwc3_omap_probe(struct platform_device *pdev)

platform_set_drvdata(pdev, omap);

- irq = platform_get_irq(pdev, 1);
+ irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(dev, "missing IRQ resource\n");
return -EINVAL;
}

- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "missing memory base resource\n");
return -EINVAL;
@@ -389,25 +389,22 @@ static int dwc3_omap_probe(struct platform_device *pdev)

reg = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);

- utmi_mode = of_get_property(node, "utmi-mode", &size);
- if (utmi_mode && size == sizeof(*utmi_mode)) {
- reg |= *utmi_mode;
- } else {
- if (!pdata) {
- dev_dbg(dev, "missing platform data\n");
- } else {
- switch (pdata->utmi_mode) {
- case DWC3_OMAP_UTMI_MODE_SW:
- reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
- break;
- case DWC3_OMAP_UTMI_MODE_HW:
- reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
- break;
- default:
- dev_dbg(dev, "UNKNOWN utmi mode %d\n",
- pdata->utmi_mode);
- }
- }
+ if (node)
+ of_property_read_u32(node, "utmi-mode", &utmi_mode);
+ else if (pdata)
+ utmi_mode = pdata->utmi_mode;
+ else
+ dev_dbg(dev, "missing platform data\n");
+
+ switch (utmi_mode) {
+ case DWC3_OMAP_UTMI_MODE_SW:
+ reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
+ break;
+ case DWC3_OMAP_UTMI_MODE_HW:
+ reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
+ break;
+ default:
+ dev_dbg(dev, "UNKNOWN utmi mode %d\n", utmi_mode);
}

dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, reg);
@@ -467,7 +464,7 @@ static int dwc3_omap_remove(struct platform_device *pdev)

static const struct of_device_id of_dwc3_matach[] = {
{
- "ti,dwc3",
+ .compatible = "ti,dwc3"
},
{ },
};
--
1.7.9.5


\
 
 \ /
  Last update: 2013-01-25 08:44    [W:0.075 / U:2.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site