lkml.org 
[lkml]   [2013]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 27/71] ARC: TLB flush Handling
Date
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
---
arch/arc/include/asm/tlb.h | 17 ++
arch/arc/include/asm/tlbflush.h | 28 ++++
arch/arc/mm/tlb.c | 311 +++++++++++++++++++++++++++++++++++++++
3 files changed, 356 insertions(+), 0 deletions(-)
create mode 100644 arch/arc/include/asm/tlbflush.h

diff --git a/arch/arc/include/asm/tlb.h b/arch/arc/include/asm/tlb.h
index b571e12..3eb2ce0 100644
--- a/arch/arc/include/asm/tlb.h
+++ b/arch/arc/include/asm/tlb.h
@@ -21,6 +21,23 @@

#ifndef __ASSEMBLY__

+#define tlb_flush(tlb) local_flush_tlb_mm((tlb)->mm)
+
+/*
+ * This pair is called at time of munmap/exit to flush cache and TLB entries
+ * for mappings being torn down.
+ * 1) cache-flush part -implemented via tlb_start_vma( ) can be NOP (for now)
+ * as we don't support aliasing configs in our VIPT D$.
+ * 2) tlb-flush part - implemted via tlb_end_vma( ) can be NOP as well-
+ * albiet for difft reasons - its better handled by moving to new ASID
+ *
+ * Note, read http://lkml.org/lkml/2004/1/15/6
+ */
+#define tlb_start_vma(tlb, vma)
+#define tlb_end_vma(tlb, vma)
+
+#define __tlb_remove_tlb_entry(tlb, ptep, address)
+
#include <linux/pagemap.h>
#include <asm-generic/tlb.h>

diff --git a/arch/arc/include/asm/tlbflush.h b/arch/arc/include/asm/tlbflush.h
new file mode 100644
index 0000000..b2f9bc7
--- /dev/null
+++ b/arch/arc/include/asm/tlbflush.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARC_TLBFLUSH__
+#define __ASM_ARC_TLBFLUSH__
+
+#include <linux/mm.h>
+
+void local_flush_tlb_all(void);
+void local_flush_tlb_mm(struct mm_struct *mm);
+void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
+void local_flush_tlb_kernel_range(unsigned long start, unsigned long end);
+void local_flush_tlb_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end);
+
+/* XXX: Revisit for SMP */
+#define flush_tlb_range(vma, s, e) local_flush_tlb_range(vma, s, e)
+#define flush_tlb_page(vma, page) local_flush_tlb_page(vma, page)
+#define flush_tlb_kernel_range(s, e) local_flush_tlb_kernel_range(s, e)
+#define flush_tlb_all() local_flush_tlb_all()
+#define flush_tlb_mm(mm) local_flush_tlb_mm(mm)
+
+#endif
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index 404e5be..232a0ff 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -6,13 +6,97 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
+ *
+ * vineetg: Aug 2011
+ * -Reintroduce duplicate PD fixup - some customer chips still have the issue
+ *
+ * vineetg: May 2011
+ * -No need to flush_cache_page( ) for each call to update_mmu_cache()
+ * some of the LMBench tests improved amazingly
+ * = page-fault thrice as fast (75 usec to 28 usec)
+ * = mmap twice as fast (9.6 msec to 4.6 msec),
+ * = fork (5.3 msec to 3.7 msec)
+ *
+ * vineetg: April 2011 :
+ * -MMU v3: PD{0,1} bits layout changed: They don't overlap anymore,
+ * helps avoid a shift when preparing PD0 from PTE
+ *
+ * vineetg: April 2011 : Preparing for MMU V3
+ * -MMU v2/v3 BCRs decoded differently
+ * -Remove TLB_SIZE hardcoding as it's variable now: 256 or 512
+ * -tlb_entry_erase( ) can be void
+ * -local_flush_tlb_range( ):
+ * = need not "ceil" @end
+ * = walks MMU only if range spans < 32 entries, as opposed to 256
+ *
+ * Vineetg: Sept 10th 2008
+ * -Changes related to MMU v2 (Rel 4.8)
+ *
+ * Vineetg: Aug 29th 2008
+ * -In TLB Flush operations (Metal Fix MMU) there is a explict command to
+ * flush Micro-TLBS. If TLB Index Reg is invalid prior to TLBIVUTLB cmd,
+ * it fails. Thus need to load it with ANY valid value before invoking
+ * TLBIVUTLB cmd
+ *
+ * Vineetg: Aug 21th 2008:
+ * -Reduced the duration of IRQ lockouts in TLB Flush routines
+ * -Multiple copies of TLB erase code seperated into a "single" function
+ * -In TLB Flush routines, interrupt disabling moved UP to retrieve ASID
+ * in interrupt-safe region.
+ *
+ * Vineetg: April 23rd Bug #93131
+ * Problem: tlb_flush_kernel_range() doesnt do anything if the range to
+ * flush is more than the size of TLB itself.
+ *
+ * Rahul Trivedi : Codito Technologies 2004
*/

#include <linux/module.h>
#include <asm/arcregs.h>
+#include <asm/setup.h>
#include <asm/mmu_context.h>
#include <asm/tlb.h>

+/* Need for ARC MMU v2
+ *
+ * ARC700 MMU-v1 had a Joint-TLB for Code and Data and is 2 way set-assoc.
+ * For a memcpy operation with 3 players (src/dst/code) such that all 3 pages
+ * map into same set, there would be contention for the 2 ways causing severe
+ * Thrashing.
+ *
+ * Although J-TLB is 2 way set assoc, ARC700 caches J-TLB into uTLBS which has
+ * much higher associativity. u-D-TLB is 8 ways, u-I-TLB is 4 ways.
+ * Given this, the thrasing problem should never happen because once the 3
+ * J-TLB entries are created (even though 3rd will knock out one of the prev
+ * two), the u-D-TLB and u-I-TLB will have what is required to accomplish memcpy
+ *
+ * Yet we still see the Thrashing because a J-TLB Write cause flush of u-TLBs.
+ * This is a simple design for keeping them in sync. So what do we do?
+ * The solution which James came up was pretty neat. It utilised the assoc
+ * of uTLBs by not invalidating always but only when absolutely necessary.
+ *
+ * - Existing TLB commands work as before
+ * - New command (TLBWriteNI) for TLB write without clearing uTLBs
+ * - New command (TLBIVUTLB) to invalidate uTLBs.
+ *
+ * The uTLBs need only be invalidated when pages are being removed from the
+ * OS page table. If a 'victim' TLB entry is being overwritten in the main TLB
+ * as a result of a miss, the removed entry is still allowed to exist in the
+ * uTLBs as it is still valid and present in the OS page table. This allows the
+ * full associativity of the uTLBs to hide the limited associativity of the main
+ * TLB.
+ *
+ * During a miss handler, the new "TLBWriteNI" command is used to load
+ * entries without clearing the uTLBs.
+ *
+ * When the OS page table is updated, TLB entries that may be associated with a
+ * removed page are removed (flushed) from the TLB using TLBWrite. In this
+ * circumstance, the uTLBs must also be cleared. This is done by using the
+ * existing TLBWrite command. An explicit IVUTLB is also required for those
+ * corner cases when TLBWrite was not executed at all because the corresp
+ * J-TLB entry got evicted/replaced.
+ */
+
/* A copy of the ASID from the PID reg is kept in asid_cache */
int asid_cache = FIRST_ASID;

@@ -22,6 +106,233 @@ int asid_cache = FIRST_ASID;
*/
struct mm_struct *asid_mm_map[NUM_ASID + 1];

+/*
+ * Utility Routine to erase a J-TLB entry
+ * The procedure is to look it up in the MMU. If found, ERASE it by
+ * issuing a TlbWrite CMD with PD0 = PD1 = 0
+ */
+
+static void __tlb_entry_erase(void)
+{
+ write_aux_reg(ARC_REG_TLBPD1, 0);
+ write_aux_reg(ARC_REG_TLBPD0, 0);
+ write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite);
+}
+
+static void tlb_entry_erase(unsigned int vaddr_n_asid)
+{
+ unsigned int idx;
+
+ /* Locate the TLB entry for this vaddr + ASID */
+ write_aux_reg(ARC_REG_TLBPD0, vaddr_n_asid);
+ write_aux_reg(ARC_REG_TLBCOMMAND, TLBProbe);
+ idx = read_aux_reg(ARC_REG_TLBINDEX);
+
+ /* No error means entry found, zero it out */
+ if (likely(!(idx & TLB_LKUP_ERR))) {
+ __tlb_entry_erase();
+ } else { /* Some sort of Error */
+
+ /* Duplicate entry error */
+ if (idx & 0x1) {
+ /* TODO we need to handle this case too */
+ pr_emerg("unhandled Duplicate flush for %x\n",
+ vaddr_n_asid);
+ }
+ /* else entry not found so nothing to do */
+ }
+}
+
+/****************************************************************************
+ * ARC700 MMU caches recently used J-TLB entries (RAM) as uTLBs (FLOPs)
+ *
+ * New IVUTLB cmd in MMU v2 explictly invalidates the uTLB
+ *
+ * utlb_invalidate ( )
+ * -For v2 MMU calls Flush uTLB Cmd
+ * -For v1 MMU does nothing (except for Metal Fix v1 MMU)
+ * This is because in v1 TLBWrite itself invalidate uTLBs
+ ***************************************************************************/
+
+static void utlb_invalidate(void)
+{
+#if (CONFIG_ARC_MMU_VER >= 2)
+
+#if (CONFIG_ARC_MMU_VER < 3)
+ /* MMU v2 introduced the uTLB Flush command.
+ * There was however an obscure hardware bug, where uTLB flush would
+ * fail when a prior probe for J-TLB (both totally unrelated) would
+ * return lkup err - because the entry didnt exist in MMU.
+ * The Workround was to set Index reg with some valid value, prior to
+ * flush. This was fixed in MMU v3 hence not needed any more
+ */
+ unsigned int idx;
+
+ /* make sure INDEX Reg is valid */
+ idx = read_aux_reg(ARC_REG_TLBINDEX);
+
+ /* If not write some dummy val */
+ if (unlikely(idx & TLB_LKUP_ERR))
+ write_aux_reg(ARC_REG_TLBINDEX, 0xa);
+#endif
+
+ write_aux_reg(ARC_REG_TLBCOMMAND, TLBIVUTLB);
+#endif
+
+}
+
+/*
+ * Un-conditionally (without lookup) erase the entire MMU contents
+ */
+
+noinline void local_flush_tlb_all(void)
+{
+ unsigned long flags;
+ unsigned int entry;
+ struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
+
+ local_irq_save(flags);
+
+ /* Load PD0 and PD1 with template for a Blank Entry */
+ write_aux_reg(ARC_REG_TLBPD1, 0);
+ write_aux_reg(ARC_REG_TLBPD0, 0);
+
+ for (entry = 0; entry < mmu->num_tlb; entry++) {
+ /* write this entry to the TLB */
+ write_aux_reg(ARC_REG_TLBINDEX, entry);
+ write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite);
+ }
+
+ utlb_invalidate();
+
+ local_irq_restore(flags);
+}
+
+/*
+ * Flush the entrie MM for userland. The fastest way is to move to Next ASID
+ */
+noinline void local_flush_tlb_mm(struct mm_struct *mm)
+{
+ /*
+ * Small optimisation courtesy IA64
+ * flush_mm called during fork,exit,munmap etc, multiple times as well.
+ * Only for fork( ) do we need to move parent to a new MMU ctxt,
+ * all other cases are NOPs, hence this check.
+ */
+ if (atomic_read(&mm->mm_users) == 0)
+ return;
+
+ /*
+ * Workaround for Android weirdism:
+ * A binder VMA could end up in a task such that vma->mm != tsk->mm
+ * old code would cause h/w - s/w ASID to get out of sync
+ */
+ if (current->mm != mm)
+ destroy_context(mm);
+ else
+ get_new_mmu_context(mm);
+}
+
+/*
+ * Flush a Range of TLB entries for userland.
+ * @start is inclusive, while @end is exclusive
+ * Difference between this and Kernel Range Flush is
+ * -Here the fastest way (if range is too large) is to move to next ASID
+ * without doing any explicit Shootdown
+ * -In case of kernel Flush, entry has to be shot down explictly
+ */
+void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end)
+{
+ unsigned long flags;
+ unsigned int asid;
+
+ /* If range @start to @end is more than 32 TLB entries deep,
+ * its better to move to a new ASID rather than searching for
+ * individual entries and then shooting them down
+ *
+ * The calc above is rough, doesn't account for unaligned parts,
+ * since this is heuristics based anyways
+ */
+ if (unlikely((end - start) >= PAGE_SIZE * 32)) {
+ local_flush_tlb_mm(vma->vm_mm);
+ return;
+ }
+
+ /*
+ * @start moved to page start: this alone suffices for checking
+ * loop end condition below, w/o need for aligning @end to end
+ * e.g. 2000 to 4001 will anyhow loop twice
+ */
+ start &= PAGE_MASK;
+
+ local_irq_save(flags);
+ asid = vma->vm_mm->context.asid;
+
+ if (asid != NO_ASID) {
+ while (start < end) {
+ tlb_entry_erase(start | (asid & 0xff));
+ start += PAGE_SIZE;
+ }
+ }
+
+ utlb_invalidate();
+
+ local_irq_restore(flags);
+}
+
+/* Flush the kernel TLB entries - vmalloc/modules (Global from MMU perspective)
+ * @start, @end interpreted as kvaddr
+ * Interestingly, shared TLB entries can also be flushed using just
+ * @start,@end alone (interpreted as user vaddr), although technically SASID
+ * is also needed. However our smart TLbProbe lookup takes care of that.
+ */
+void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+ unsigned long flags;
+
+ /* exactly same as above, except for TLB entry not taking ASID */
+
+ if (unlikely((end - start) >= PAGE_SIZE * 32)) {
+ local_flush_tlb_all();
+ return;
+ }
+
+ start &= PAGE_MASK;
+
+ local_irq_save(flags);
+ while (start < end) {
+ tlb_entry_erase(start);
+ start += PAGE_SIZE;
+ }
+
+ utlb_invalidate();
+
+ local_irq_restore(flags);
+}
+
+/*
+ * Delete TLB entry in MMU for a given page (??? address)
+ * NOTE One TLB entry contains translation for single PAGE
+ */
+
+void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
+{
+ unsigned long flags;
+
+ /* Note that it is critical that interrupts are DISABLED between
+ * checking the ASID and using it flush the TLB entry
+ */
+ local_irq_save(flags);
+
+ if (vma->vm_mm->context.asid != NO_ASID) {
+ tlb_entry_erase((page & PAGE_MASK) |
+ (vma->vm_mm->context.asid & 0xff));
+ utlb_invalidate();
+ }
+
+ local_irq_restore(flags);
+}

/*
* Routine to create a TLB entry
--
1.7.4.1


\
 
 \ /
  Last update: 2013-01-24 13:01    [W:0.242 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site