lkml.org 
[lkml]   [2013]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 0/6] USB: Add support for multiple PHYs of same type
On Tuesday 22 January 2013 09:11 PM, Koen Kooi wrote:
>
> Op 22 jan. 2013, om 10:58 heeft Kishon Vijay Abraham I <kishon@ti.com> het volgende geschreven:
>
>> This patch series adds support for adding multiple PHY's (of same type).
>> The binding information has to be present in the PHY library (otg.c) in
>> order for it to return the appropriate PHY whenever the USB controller
>> request for the PHY. So added a new API usb_bind_phy() to pass the binding
>> information. This API should be called by platform specific initialization
>> code.
>>
>> So the binding should be done something like
>> usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto"); specifying the USB
>> controller device name, index, and the PHY device name.
>> I have done this binding for OMAP platforms, but it should be done for
>> all the platforms.
>>
>> After this design, the phy can be got by passing the USB controller device
>> pointer and the index.
>>
>> Developed this patch series on
>> git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git xceiv
>> after applying "usb: musb: add driver for control module" patch series
>> and "ARM: dts: omap: add dt data for MUSB"
>>
>> Did basic enumeration testing in omap4 panda and omap3 beagle.
>
> With this patchset USB completely breaks on am33xx beaglebone, is that intended?
Not really.
Does am33xx makes use of omap2430.c? Which PHY does am33xx uses?

Thanks
Kishon




\
 
 \ /
  Last update: 2013-01-22 18:01    [W:0.140 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site