lkml.org 
[lkml]   [2013]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 23/24] ab8500-bm: Fix minor niggles experienced during testing
On Mon, Jan 21, 2013 at 12:03:59PM +0000, Lee Jones wrote:
> When compile testing the new AB8500 Battery Management changes
> due for inclusion into upstream, there were a few minor niggles
> which required repairing, or adapting for use against the
> Mainline kernel. This patch is a collection of them all.

No. This is the third time I'm saying it: the last time I checked, this is
not how we do development in the mainline.

1. One logical change at a time;
2. Every patch in a sequence must be bisectable, compilable;
3. The patches must not "break things temporary" 'because it is easier to
do development that way'. If you introduce a new feature, make all
possible to not introduce regressions.

> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
> drivers/power/ab8500_fg.h | 6 ++++--
> drivers/power/abx500_chargalg.c | 4 ++--
> drivers/power/pm2301_charger.c | 4 ++--
> 3 files changed, 8 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/power/ab8500_fg.h b/drivers/power/ab8500_fg.h
> index 946840b..bb78dc9 100644
> --- a/drivers/power/ab8500_fg.h
> +++ b/drivers/power/ab8500_fg.h
> @@ -182,6 +182,7 @@ struct ab8500_fg_test {
> * @fg_check_hw_failure_work: Work for checking HW state
> * @cc_lock: Mutex for locking the CC
> * @fg_kobject: Structure of type kobject
> + * @test: Structure of type ab8500_fg_test for test purpose
> */
> struct ab8500_fg {
> struct device *dev;
> @@ -224,6 +225,7 @@ struct ab8500_fg {
> struct delayed_work fg_check_hw_failure_work;
> struct mutex cc_lock;
> struct kobject fg_kobject;
> + struct ab8500_fg_test test;

You are introducing it, but I don't see any users.

> };
>
> extern char *discharge_state[];
> @@ -232,8 +234,8 @@ extern char *charge_state[];
> int ab8500_fg_coulomb_counter(struct ab8500_fg *di, bool enable);
> void ab8500_fg_charge_state_to(struct ab8500_fg *di,
> enum ab8500_fg_charge_state new_state);
> -void ab8500_fg_discharge_state_to(struct ab8500_fg *di,
> - enum ab8500_fg_charge_state new_state);
> +static void ab8500_fg_discharge_state_to(struct ab8500_fg *di,
> + enum ab8500_fg_discharge_state new_state);
> /* test initialization */
> #ifdef CONFIG_AB8500_BM_DEEP_DEBUG
> void ab8500_fg_test_init(struct ab8500_fg *di);
> diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c
> index 694f592..cacf512 100644
> --- a/drivers/power/abx500_chargalg.c
> +++ b/drivers/power/abx500_chargalg.c
> @@ -1664,8 +1664,8 @@ static int abx500_chargalg_get_property(struct power_supply *psy,
> static ssize_t ab8500_chargalg_sysfs_show(struct kobject *kobj,
> struct attribute *attr, char *buf)
> {
> - struct ab8500_chargalg *di = container_of(kobj,
> - struct ab8500_chargalg, chargalg_kobject);
> + struct abx500_chargalg *di = container_of(kobj,
> + struct abx500_chargalg, chargalg_kobject);

Spaces.

>
> return sprintf(buf, "%d\n",
> di->susp_status.ac_suspended &&
> diff --git a/drivers/power/pm2301_charger.c b/drivers/power/pm2301_charger.c
> index 14e37b2..5ebae88 100644
> --- a/drivers/power/pm2301_charger.c
> +++ b/drivers/power/pm2301_charger.c
> @@ -22,8 +22,8 @@
> #include <linux/i2c.h>
> #include <linux/workqueue.h>
> #include <linux/kobject.h>
> -#include <linux/mfd/ab8500.h>
> #include <linux/mfd/abx500.h>
> +#include <linux/mfd/abx500/ab8500.h>
> #include <linux/mfd/abx500/ab8500-bm.h>
> #include <linux/mfd/abx500/ab8500-gpadc.h>
> #include <linux/mfd/abx500/ux500_chargalg.h>
> @@ -867,7 +867,7 @@ static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
>
> /* get parent data */
> pm2->dev = &i2c_client->dev;
> - pm2->gpadc = ab8500_gpadc_get();
> + pm2->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");

Was the driver even compilable before? You've just introduced the new
driver in this exact series. :-/

Since pm2301 is a new driver, please merge all pm2301 stuff into one
patch.

Or, if you want to preserve the development history of the new driver,
this is also fine, but then I'd prefer to take it via a pull-request with
only this driver.

Thanks,
Anton


\
 
 \ /
  Last update: 2013-01-21 21:02    [W:0.241 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site