lkml.org 
[lkml]   [2013]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] documentation: devicetree: Fix typo within Documentation/devicetree
Date
On Mon, 14 Jan 2013 15:14:56 +0900, Masanari Iida <standby24x7@gmail.com> wrote:
> Correct spelling typos within Documentation/devicetree
>
> Signed-off-by: Masanari Iida <standby24x7@gmail.com>

Applied, thanks.

g.

> ---
> Documentation/devicetree/bindings/arm/atmel-aic.txt | 2 +-
> Documentation/devicetree/bindings/arm/exynos/power_domain.txt | 2 +-
> Documentation/devicetree/bindings/arm/gic.txt | 4 ++--
> Documentation/devicetree/bindings/arm/omap/omap.txt | 6 +++---
> Documentation/devicetree/bindings/i2c/samsung-i2c.txt | 2 +-
> Documentation/devicetree/bindings/mips/cavium/dma-engine.txt | 2 +-
> Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt | 6 +++---
> Documentation/devicetree/bindings/mmc/samsung-sdhci.txt | 2 +-
> Documentation/devicetree/bindings/powerpc/fsl/srio.txt | 4 ++--
> Documentation/devicetree/bindings/regulator/tps62360-regulator.txt | 4 ++--
> Documentation/devicetree/bindings/rtc/s3c-rtc.txt | 2 +-
> Documentation/devicetree/bindings/watchdog/samsung-wdt.txt | 2 +-
> 12 files changed, 19 insertions(+), 19 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/atmel-aic.txt b/Documentation/devicetree/bindings/arm/atmel-aic.txt
> index 19078bf..ad03121 100644
> --- a/Documentation/devicetree/bindings/arm/atmel-aic.txt
> +++ b/Documentation/devicetree/bindings/arm/atmel-aic.txt
> @@ -4,7 +4,7 @@ Required properties:
> - compatible: Should be "atmel,<chip>-aic"
> - interrupt-controller: Identifies the node as an interrupt controller.
> - interrupt-parent: For single AIC system, it is an empty property.
> -- #interrupt-cells: The number of cells to define the interrupts. It sould be 3.
> +- #interrupt-cells: The number of cells to define the interrupts. It should be 3.
> The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
> The second cell is used to specify flags:
> bits[3:0] trigger type and level flags:
> diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
> index 6528e21..3fb457b 100644
> --- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
> +++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
> @@ -4,7 +4,7 @@ Exynos processors include support for multiple power domains which are used
> to gate power to one or more peripherals on the processor.
>
> Required Properties:
> -- compatiable: should be one of the following.
> +- compatible: should be one of the following.
> * samsung,exynos4210-pd - for exynos4210 type power domain.
> - reg: physical base address of the controller and length of memory mapped
> region.
> diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
> index 62eb8df..3dfb0c0 100644
> --- a/Documentation/devicetree/bindings/arm/gic.txt
> +++ b/Documentation/devicetree/bindings/arm/gic.txt
> @@ -42,7 +42,7 @@ Main node required properties:
>
> Optional
> - interrupts : Interrupt source of the parent interrupt controller on
> - secondary GICs, or VGIC maintainance interrupt on primary GIC (see
> + secondary GICs, or VGIC maintenance interrupt on primary GIC (see
> below).
>
> - cpu-offset : per-cpu offset within the distributor and cpu interface
> @@ -74,7 +74,7 @@ Required properties:
> virtual interface control register base and size. The 2nd additional
> region is the GIC virtual cpu interface register base and size.
>
> -- interrupts : VGIC maintainance interrupt.
> +- interrupts : VGIC maintenance interrupt.
>
> Example:
>
> diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
> index d0051a7..f8288ea 100644
> --- a/Documentation/devicetree/bindings/arm/omap/omap.txt
> +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
> @@ -39,16 +39,16 @@ Boards:
> - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
> compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"
>
> -- OMAP4 SDP : Software Developement Board
> +- OMAP4 SDP : Software Development Board
> compatible = "ti,omap4-sdp", "ti,omap4430"
>
> - OMAP4 PandaBoard : Low cost community board
> compatible = "ti,omap4-panda", "ti,omap4430"
>
> -- OMAP3 EVM : Software Developement Board for OMAP35x, AM/DM37x
> +- OMAP3 EVM : Software Development Board for OMAP35x, AM/DM37x
> compatible = "ti,omap3-evm", "ti,omap3"
>
> -- AM335X EVM : Software Developement Board for AM335x
> +- AM335X EVM : Software Development Board for AM335x
> compatible = "ti,am335x-evm", "ti,am33xx", "ti,omap3"
>
> - AM335X Bone : Low cost community board
> diff --git a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt
> index b6cb5a1..ccdf9c9 100644
> --- a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt
> +++ b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt
> @@ -18,7 +18,7 @@ Optional properties:
> The gpio specifier depends on the gpio controller. Required in all
> cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output
> lines are permanently wired to the respective client
> - - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
> + - samsung,i2c-slave-addr: Slave address in multi-master environment. If not
> specified, default value is 0.
> - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
> specified, the default value in Hz is 100000.
> diff --git a/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt b/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt
> index cb4291e..a5bdff4 100644
> --- a/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt
> +++ b/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt
> @@ -1,7 +1,7 @@
> * DMA Engine.
>
> The Octeon DMA Engine transfers between the Boot Bus and main memory.
> -The DMA Engine will be refered to by phandle by any device that is
> +The DMA Engine will be referred to by phandle by any device that is
> connected to it.
>
> Properties:
> diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> index 7927689..898b222 100644
> --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> @@ -11,11 +11,11 @@ Required Properties:
>
> * compatible: should be
> - "samsung,exynos4210-dw-mshc": for controllers with Samsung Exynos4210
> - specific extentions.
> + specific extensions.
> - "samsung,exynos4412-dw-mshc": for controllers with Samsung Exynos4412
> - specific extentions.
> + specific extensions.
> - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
> - specific extentions.
> + specific extensions.
>
> * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
> unit (ciu) clock. This property is applicable only for Exynos5 SoC's and
> diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
> index 630a7d7..43acfdf 100644
> --- a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
> +++ b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
> @@ -49,5 +49,5 @@ Example:
> };
>
> Note: This example shows both SoC specific and board specific properties
> - in a single device node. The properties can be actually be seperated
> + in a single device node. The properties can be actually be separated
> into SoC specific node and board specific node.
> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/srio.txt b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt
> index b039bcb..07abf0f 100644
> --- a/Documentation/devicetree/bindings/powerpc/fsl/srio.txt
> +++ b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt
> @@ -8,9 +8,9 @@ Properties:
> Definition: Must include "fsl,srio" for IP blocks with IP Block
> Revision Register (SRIO IPBRR1) Major ID equal to 0x01c0.
>
> - Optionally, a compatiable string of "fsl,srio-vX.Y" where X is Major
> + Optionally, a compatible string of "fsl,srio-vX.Y" where X is Major
> version in IP Block Revision Register and Y is Minor version. If this
> - compatiable is provided it should be ordered before "fsl,srio".
> + compatible is provided it should be ordered before "fsl,srio".
>
> - reg
> Usage: required
> diff --git a/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt b/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt
> index c8ca6b8..1b20c3d 100644
> --- a/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt
> +++ b/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt
> @@ -17,9 +17,9 @@ Optional properties:
> - ti,vsel1-gpio: Gpio for controlling VSEL1 line.
> If this property is missing, then assume that there is no GPIO
> for vsel1 control.
> -- ti,vsel0-state-high: Inital state of vsel0 input is high.
> +- ti,vsel0-state-high: Initial state of vsel0 input is high.
> If this property is missing, then assume the state as low (0).
> -- ti,vsel1-state-high: Inital state of vsel1 input is high.
> +- ti,vsel1-state-high: Initial state of vsel1 input is high.
> If this property is missing, then assume the state as low (0).
>
> Any property defined as part of the core regulator binding, defined in
> diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
> index 90ec45f..7ac7259 100644
> --- a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
> +++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
> @@ -7,7 +7,7 @@ Required properties:
> - reg: physical base address of the controller and length of memory mapped
> region.
> - interrupts: Two interrupt numbers to the cpu should be specified. First
> - interrupt number is the rtc alarm interupt and second interrupt number
> + interrupt number is the rtc alarm interrupt and second interrupt number
> is the rtc tick interrupt. The number of cells representing a interrupt
> depends on the parent interrupt controller.
>
> diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
> index 79ead82..ce0d8e7 100644
> --- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
> @@ -2,7 +2,7 @@
>
> The Samsung's Watchdog controller is used for resuming system operation
> after a preset amount of time during which the WDT reset event has not
> -occured.
> +occurred.
>
> Required properties:
> - compatible : should be "samsung,s3c2410-wdt"
> --
> 1.8.1.336.g94702dd
>

--
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies, Ltd.


\
 
 \ /
  Last update: 2013-01-14 21:41    [W:0.054 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site