lkml.org 
[lkml]   [2013]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 43/44] tty/metag_da: Add metag DA TTY driver
Hi, few comments/questions below.

On 01/10/2013 04:31 PM, James Hogan wrote:
> --- /dev/null
> +++ b/drivers/tty/metag_da.c
> @@ -0,0 +1,696 @@
...
> +struct dashtty_port {
> + struct tty_port port;
> + spinlock_t rx_lock;
> + void *rx_buf;
> + struct mutex xmit_lock;
> + unsigned int xmit_cnt;
> + unsigned int xmit_head;
> + unsigned int xmit_tail;
> + struct completion xmit_empty;
> +};
> +
> +static struct dashtty_port dashtty_ports[NUM_TTY_CHANNELS];

> +static int chancall(int bios_function, int channel, int arg2, void *arg3,
> + void *arg4)
> +{
> + register int bios_function__ __asm__("D1Ar1") = bios_function;
> + register int channel__ __asm__("D0Ar2") = channel;
> + register int arg2__ __asm__("D1Ar3") = arg2;
> + register void *arg3__ __asm__("D0Ar4") = arg3;
> + register void *arg4__ __asm__("D1Ar5") = arg4;
> + register int bios_call __asm__("D0Ar6") = 3;
> + register int result __asm__("D0Re0");

This is really ugly. Couldn't it be specified in the asm's constraints
below?

> + __asm__ volatile (
> + "SETL [A0StP++], %6,%5\n\t"
> + "SETL [A0StP++], %4,%3\n\t"
> + "SETL [A0StP++], %2,%1\n\t"
> + "ADD A0StP, A0StP, #8\n\t"
> + "SWITCH #0x0C30208\n\t"
> + "GETD %0, [A0StP+#-8]\n\t"
> + "SUB A0StP, A0StP, #(4*6)+8\n\t"
> + : "=r" (result)/* outs */
> + : "r" (bios_function__), "r" (channel__), "r" (arg2__),
> + "r" (arg3__), "r" (arg4__), "r" (bios_call) /* ins */
> + : "memory");
> +
> + return result;
> +}
...
> +static int dashtty_port_activate(struct tty_port *port, struct tty_struct *tty)
> +{
> + struct dashtty_port *dport = container_of(port, struct dashtty_port,
> + port);
> + void *rx_buf;
> +
> + /* Allocate the buffer we use for writing data */
> + if (tty_port_alloc_xmit_buf(port) < 0)
> + goto err;
> +
> + /* Allocate the buffer we use for reading data */
> + rx_buf = kzalloc(RX_BUF_SIZE, GFP_KERNEL);
> + if (!rx_buf)
> + goto err_free_xmit;
> +
> + spin_lock_bh(&dport->rx_lock);
> + dport->rx_buf = rx_buf;
> + spin_unlock_bh(&dport->rx_lock);
> +
> + return 0;
> +err_free_xmit:
> + tty_port_free_xmit_buf(port);
> +err:
> + return -ENOMEM;
> +}
> +
> +static void dashtty_port_shutdown(struct tty_port *port)
> +{
> + struct dashtty_port *dport = container_of(port, struct dashtty_port,
> + port);
> + void *rx_buf;
> + unsigned int count;
> +
> + mutex_lock(&dport->xmit_lock);
> + count = dport->xmit_cnt;
> + mutex_unlock(&dport->xmit_lock);
> + if (count) {
> + /*
> + * There's still data to write out, so wake and wait for the
> + * writer thread to drain the buffer.
> + */
> + del_timer(&put_timer);
> + wake_up_interruptible(&dashtty_waitqueue);
> + wait_for_completion(&dport->xmit_empty);
> + }
> +
> + /* Null the read buffer (timer could still be running!) */
> + spin_lock_bh(&dport->rx_lock);
> + rx_buf = dport->rx_buf;
> + dport->rx_buf = NULL;
> + spin_unlock_bh(&dport->rx_lock);
> + /* Free the read buffer */
> + kfree(rx_buf);
> +
> + /* Free the write buffer */
> + tty_port_free_xmit_buf(port);
> +}
> +
> +static const struct tty_port_operations dashtty_port_ops = {
> + .activate = dashtty_port_activate,
> + .shutdown = dashtty_port_shutdown,
> +};
> +
> +static int dashtty_install(struct tty_driver *driver, struct tty_struct *tty)
> +{
> + struct dashtty_port *port;
> + int ret, line;
> +
> + if (!tty)
> + return -ENODEV;

This will never happen.

> + line = tty->index;
> +
> + if (line < 0 || line >= NUM_TTY_CHANNELS)
> + return -ENODEV;

Neither this.

> + port = &dashtty_ports[line];
> +
> + port->port.ops = &dashtty_port_ops;

You can do that along with tty_port_init in the module_init function.

> + ret = tty_port_install(&port->port, driver, tty);
> + if (ret)
> + return ret;
> +
> + /*
> + * Don't add the poll timer if we're opening a console. This
> + * avoids the overhead of polling the Dash but means it is not
> + * possible to have a login on /dev/console.
> + *
> + */
> + if (line != CONSOLE_CHANNEL)
> + if (atomic_inc_return(&num_channels_need_poll) == 1)
> + add_poll_timer(&poll_timer);

This should be in activate I suppose. You don't need install/cleanup at
all I beleive.

> + return 0;
> +}
> +
> +static void dashtty_cleanup(struct tty_struct *tty)
> +{
> + int line;
> +
> + if (!tty)
> + return;

The same as above.

> + line = tty->index;
> +
> + if (line < 0 || line >= NUM_TTY_CHANNELS)
> + return;

Detto.

> + if (line != CONSOLE_CHANNEL)
> + if (atomic_dec_and_test(&num_channels_need_poll))
> + del_timer_sync(&poll_timer);

To shutdown. No need for cleanup.

> +}
> +
> +static int dashtty_open(struct tty_struct *tty, struct file *filp)
> +{
> + return tty_port_open(tty->port, tty, filp);
> +}
> +
> +static void dashtty_close(struct tty_struct *tty, struct file *filp)
> +{
> + return tty_port_close(tty->port, tty, filp);
> +}
> +
> +static void dashtty_hangup(struct tty_struct *tty)
> +{
> + int channel;
> + struct dashtty_port *dport;
> +
> + channel = FIRST_TTY_CHANNEL + tty->index;
> + dport = &dashtty_ports[channel];
> +
> + /* drop any data in the xmit buffer */
> + mutex_lock(&dport->xmit_lock);
> + if (dport->xmit_cnt) {
> + atomic_sub(dport->xmit_cnt, &dashtty_xmit_cnt);
> + dport->xmit_cnt = 0;
> + dport->xmit_head = 0;
> + dport->xmit_tail = 0;
> + complete(&dport->xmit_empty);
> + }
> + mutex_unlock(&dport->xmit_lock);
> +
> + tty_port_hangup(tty->port);
> +}

Good.

> +static int dashtty_write_room(struct tty_struct *tty)
> +{
> + struct dashtty_port *dport;
> + int channel;
> + int room;
> +
> + channel = FIRST_TTY_CHANNEL + tty->index;

FIRST_TTY_CHANNEL doesn't make much sense. Better to be removed completely.

> + dport = &dashtty_ports[channel];
> +
> + /* report the space in the xmit buffer */
> + mutex_lock(&dport->xmit_lock);
> + room = SERIAL_XMIT_SIZE - dport->xmit_cnt;
> + mutex_unlock(&dport->xmit_lock);
> +
> + return room;
> +}
...
> +static int __init dashtty_init(void)
> +{
> + int ret;
> + int nport;
> + struct dashtty_port *dport;
> +
> + if (!metag_da_enabled())
> + return -ENODEV;
> +
> + channel_driver = tty_alloc_driver(NUM_TTY_CHANNELS, 0);

This should be s/0/TTY_DRIVER_REAL_RAW/.

> + if (IS_ERR(channel_driver))
> + return PTR_ERR(channel_driver);
> +
> + channel_driver->owner = THIS_MODULE;

No need to set this.

> + channel_driver->driver_name = "ttyDA";

This should be rather "metag".

> + channel_driver->name = "ttyDA";
> + channel_driver->major = DA_TTY_MAJOR;
> + channel_driver->minor_start = 0;
> + channel_driver->type = TTY_DRIVER_TYPE_SERIAL;
> + channel_driver->subtype = SERIAL_TYPE_NORMAL;
> + channel_driver->init_termios = tty_std_termios;
> + channel_driver->init_termios.c_cflag |= CLOCAL;
> + channel_driver->flags = TTY_DRIVER_REAL_RAW;

And this is unnecessary now.

> +
> + tty_set_operations(channel_driver, &dashtty_ops);
> + for (nport = 0; nport < NUM_TTY_CHANNELS; nport++) {
> + dport = &dashtty_ports[nport];
> + tty_port_init(&dport->port);
> + spin_lock_init(&dport->rx_lock);
> + mutex_init(&dport->xmit_lock);
> + /* the xmit buffer starts empty, i.e. completely written */
> + init_completion(&dport->xmit_empty);
> + complete(&dport->xmit_empty);
> + }
> +
> + init_timer(&put_timer);
> + put_timer.function = dashtty_put_timer;

setup_timer()

> + init_waitqueue_head(&dashtty_waitqueue);
> + dashtty_thread = kthread_create(put_data, NULL, "ttyDA");
> + if (IS_ERR(dashtty_thread)) {
> + pr_err("Couldn't create dashtty thread\n");
> + ret = PTR_ERR(dashtty_thread);
> + goto err_free_driver;
> + }
> + kthread_bind(dashtty_thread, 0);

This deserves a comment why you bind it to CPU0...

> + wake_up_process(dashtty_thread);
> +
> + ret = tty_register_driver(channel_driver);
> +
> + if (ret < 0) {
> + pr_err("Couldn't install dashtty driver: err %d\n",
> + ret);
> + goto err_stop_kthread;
> + }
> +
> + return 0;
> +
> +err_stop_kthread:
> + kthread_stop(dashtty_thread);
> +err_free_driver:
> + put_tty_driver(channel_driver);
> + return ret;
> +}
> +
> +static void dashtty_exit(void)
> +{
> + del_timer_sync(&put_timer);
> + kthread_stop(dashtty_thread);
> + del_timer_sync(&poll_timer);
> + tty_unregister_driver(channel_driver);
> + put_tty_driver(channel_driver);

No tty_port_destroy anywhere?

> +}
> +
> +module_init(dashtty_init);
> +module_exit(dashtty_exit);

thanks,
--
js
suse labs


\
 
 \ /
  Last update: 2013-01-10 17:41    [W:0.236 / U:0.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site