lkml.org 
[lkml]   [2012]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Storage related regression in linux-next 20120824
On 09/09/2012 04:11 PM, Arvydas Sidorenko wrote:
>> I think you know your way around SCSI/libata much better than I do.
>>
>> I just bisected linux-next, and it comes down to the commit below, which
>> introduces the regression for me, and I'm guessing for you also. Maybe
>> it can be fixed up to satisfy us, but otherwise will have to be reverted:
>> we don't invert a default if it's going to break older working systems.
>>
>> A good workaround for me meanwhile is to add boot option "libata.fua=0":
>> please try that (or reverting the commit) and let us know the result.
>>
>> Thanks,
>> Hugh
>>
>> commit 91895b786e631ab47b618c901231f22b5a44115b
>> Author: Zheng Liu <wenqing.lz@taobao.com>
>> Date: Tue May 8 11:24:03 2012 +0800
>>
>> libata: enable SATA disk fua detection on default
>>
>> Currently, SATA disk fua detection is disabled on default because most of
>> devices don't support this feature at that time. With the development of
>> technology, more and more SATA disks support this feature. So now we can enable
>> this detection on default.
>>
>> Although fua detection is defined as a kernel module parameter, it is too hard
>> to set its value because it must be loaded and set before system starts up.
>> That needs to modify initrd file. So it is inconvenient for administrator who
>> needs to manage a huge number of servers.
>>
>> Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
>> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
>>
>> diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
>> index 5eee1c1..c3fbdca 100644
>> --- a/drivers/ata/libata-core.c
>> +++ b/drivers/ata/libata-core.c
>> @@ -135,9 +135,9 @@ int atapi_passthru16 = 1;
>> module_param(atapi_passthru16, int, 0444);
>> MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices (0=off, 1=on [default])");
>>
>> -int libata_fua = 0;
>> +int libata_fua = 1;
>> module_param_named(fua, libata_fua, int, 0444);
>> -MODULE_PARM_DESC(fua, "FUA support (0=off [default], 1=on)");
>> +MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on [default])");
>>
>> static int ata_ignore_hpa;
>> module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644);
>
> Indeed, disabling FUA explicitly solved the issue on my disk as well.
> Hugh, what hard drive you have this issue on?
>
> I believe there are two solutions:
> - Revert FUA default back to '0'
> - Start filling SATA drive blacklist in function:

I think the right thing to do for release is disable it (again), then we
can try again later with better logic.

I'll send Linus a patch to disable.

It is entirely possible that this is a software problem, where we
missing some detail turning on FUA (thereby engaging some less traveled
core block layer machinery), or even a remote possibility of triggering
a filesystem bug.

Jeff







\
 
 \ /
  Last update: 2012-09-09 23:01    [W:1.302 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site