lkml.org 
[lkml]   [2012]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 04/10] net/macb: Fix a race in macb_start_xmit()
On 09/06/2012 05:49 PM, Havard Skinnemoen :
> On Wed, Sep 5, 2012 at 11:30 PM, David Miller <davem@davemloft.net> wrote:
>> From: Nicolas Ferre <nicolas.ferre@atmel.com>
>> Date: Wed, 5 Sep 2012 10:19:11 +0200
>>
>>> From: Havard Skinnemoen <havard@skinnemoen.net>
>>>
>>> Fix a race in macb_start_xmit() where we unconditionally set the TSTART bit.
>>> If an underrun just happened (we do this with interrupts disabled, so it might
>>> not have been handled yet), the controller starts transmitting from the first
>>> entry in the ring, which is usually wrong.
>>> Restart the controller after error handling.
>>>
>>> Signed-off-by: Havard Skinnemoen <havard@skinnemoen.net>
>>> [nicolas.ferre@atmel.com: split patch in topics]
>>> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>>
>> Accumulating special case code and checks into the hot path of TX packet
>> processing is extremely unwise.
>>
>> Instead, when you handle the TX error conditions and reset the chip you
>> should first ensure that there are no flows of control in the transmit
>> function of your driver by using the appropriate locking et al. facilities.
>
> IIRC, the hardware resets the ring pointers when an error happens, and
> if we set TSTART right after that happens, the hardware will happily
> transmit whatever is sitting in the beginning of the ring. This is
> what I was trying to avoid.
>
> The details are a bit hazy as it's been a while since I looked at
> this, so it could be that simply letting it happen and using a bigger
> hammer during reset processing might work just as well. Just want to
> make sure y'all understand that we're talking about a race against
> hardware, not against interrupt handlers, threads or anything that can
> be solved by locking :)

Yes, you are right Havard.

I will see if we can let the transmitter go just before being
interrupted by the pending error.

It is true that there are several cases here:
- tx immediately stopped again by the USED bit of a non initialized
descriptor. We thus have to cleanup the error frame but also take care
about the newly queued packet...
- beginning of transmission of a not-related fragment that has just been
queued by the start_xmit; just before catching the pending error IRQ. We
may have to consider the consequences of this!

So, stay tuned ;-)

Best regards,
--
Nicolas Ferre


\
 
 \ /
  Last update: 2012-09-07 20:42    [W:0.086 / U:0.780 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site