lkml.org 
[lkml]   [2012]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 2/2] kbuild: introduce cmd_dtc_cpp
Date
From: Stephen Warren <swarren@nvidia.com>

cmd_dtc_cpp runs the C pre-processor on the input .dts file before
passing it to dtc for final compilation. This allows used of #define
within the .dts file.

Introduce a new rule for %.dtsp -> %.dtb, which uses cmd_dtc_cpp. A new
file extension is introduced for this purpose, since use of the pre-
processor must be optional; any property or node name that starts with
"#" must be escaped to prevent the pre-processor attempting to interpret
it as a directive. For this reason, skeleton.dtsi-cpp is introduced for
*.dts-cpp to include.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
arch/arm/boot/dts/skeleton.dtsip | 13 +++++++++++++
scripts/Makefile.lib | 6 ++++++
2 files changed, 19 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/skeleton.dtsip

diff --git a/arch/arm/boot/dts/skeleton.dtsip b/arch/arm/boot/dts/skeleton.dtsip
new file mode 100644
index 0000000..8bf6729
--- /dev/null
+++ b/arch/arm/boot/dts/skeleton.dtsip
@@ -0,0 +1,13 @@
+/*
+ * Skeleton device tree; the bare minimum needed to boot; just include and
+ * add a compatible value. The bootloader will typically populate the memory
+ * node.
+ */
+
+/ {
+ \#address-cells = <1>;
+ \#size-cells = <1>;
+ chosen { };
+ aliases { };
+ memory { device_type = "memory"; reg = <0 0>; };
+};
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 425578e..9dd81c0 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -269,6 +269,12 @@ cmd_dtc = $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 $(DTC_FLAGS) -d $(depfile
$(obj)/%.dtb: $(src)/dts/%.dts FORCE
$(call if_changed_dep,dtc)

+quiet_cmd_dtc_cpp = DTC+CPP $@
+cmd_dtc_cpp = $(CC) -E -Wp,-MD,$(depfile) -xc $< | $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 $(DTC_FLAGS) -
+
+$(obj)/%.dtb: $(src)/dts/%.dtsp FORCE
+ $(call if_changed_dep,dtc_cpp)
+
# Bzip2
# ---------------------------------------------------------------------------

--
1.7.0.4


\
 
 \ /
  Last update: 2012-09-28 23:41    [W:0.067 / U:2.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site