lkml.org 
[lkml]   [2012]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [RFC PATCH 00/13] DMA Engine support for AM33xx
On Wed, Sep 26, 2012 at 08:26:19AM +0000, Hebbar, Gururaja wrote:
> On Fri, Sep 21, 2012 at 23:52:11, Porter, Matt wrote:
> > On Fri, Sep 21, 2012 at 08:27:07AM +0000, Hebbar, Gururaja wrote:
> > > On Thu, Sep 20, 2012 at 20:13:33, Porter, Matt wrote:
> > > > This series adds DMA Engine support for AM33xx, which uses
> > > > an EDMA DMAC. The EDMA DMAC has been previously supported by only
> > > > a private API implementation (much like the situation with OMAP
> > > > DMA) found on the DaVinci family of SoCs.
> > > >
> > > > There are a mind-boggling number of dependencies for this series:
> > > >
> > > > - Jon Hunter's OF DMA helpers series
> > > > https://patchwork.kernel.org/patch/1461061/
> > > > https://patchwork.kernel.org/patch/1461051/
> > > > - Patch to address OF DMA helpers naming issues:
> > > > https://patchwork.kernel.org/patch/1477921/
> > > > - EDMA DMA Engine wrapper driver in linux-next
> > > > c2dde5f8f2095d7c623ff3565c1462e190272273
> > > > - EDMA DMA Engine wrapper driver bug fix:
> > > > https://patchwork.kernel.org/patch/1474411/
> > > > - A huge number of patches in linux-next for AM33xx boot
> > > > (too numerous to list)
> > > >
> > > > The approach taken is similar to how OMAP DMA is being converted to
> > > > DMA Engine support. With the functional EDMA private API already
> > > > existing in mach-davinci/dma.c, we first move that to an ARM common
> > > > area so it can be shared. Adding DT and runtime PM support to the
> > > > private EDMA API implementation allows it to run on AM33xx. AM33xx
> > > > *only* boots using DT so we leverage Jon's generic DT DMA helpers to
> > > > register EDMA DMAC with the of_dma framework and then add support
> > > > for calling the dma_request_slave_channel() API to both the mmc
> > > > and spi drivers.
> > > >
> > > > What works? Well, with this series we now have MMC and SPI support
> > > > on AM33xx. The only caveat for MMC is that the mmc3 controller has
> > > > its events on the crossbar and is not usable right now.
> > > >
> > > > This is tested on BeagleBone with a SPI framebuffer driver and SD
> > > > card.
> > > >
> > > > After this series, the plan is to convert the last in-tree user
> > > > of the private EDMA API (davinci-pcm/mcasp) and then eliminate
> > > > the private EDMA API by folding its functionality into
> > > > drivers/dma/edma.c.
> > > >
> > > > TODO:
> > > > add AM33xx crossbar support to the private EDMA API
> > > > (any EDMA events on the crossbar are not supported)
> > > >
> > >
> > >
> > > Can you please mention the base repo you have taken as starting point.
> > > (repo + extra patches ...).
> >
> > It's mainline 3.6-rc6 and you can see the complete set of patches
> > at https://github.com/ohporter/linux/tree/edma-dmaengine-am33xx-rfc-v1
> > after commit 5698bd757d55b1bb87edd1a9744ab09c142abfc2
> >
> > > This will help us to test the code.
> > >
> > > This is because I looked at the patch 12/13 and I see that mmc
> > > device-node is modified. But in mainline I don’t see device
> > > node for mmc (yet).
> >
> > Oops. You'll need e62a3333ae450bcdefbe22229d7bc277ae0ef645 and
> > fe97304557d2c6f7d0aaf1ea028ea48ffca366a9 which I forgot to include
> > in this series. I'll have them in for v2.
>
> Yesterday I tested edma patches on latest linux-next/master + merge of
> linux-omap/for_3.7/dts_part2. Below are my observations
>
> 1. baseline = linux-next/master + merge of linux-omap/for_3.7/dts_part2
> 2. on top of above branch, I applied patches [1-9]/13 of your edma
> patches
> 3. few patches required trivial changes before applying
> 4. Applied dma of patches as you mentioned
> 5. add custom patch (ARM: CUSTOM: Build a uImage with dtb already
> appended)
> From https://github.com/hvaibhav/am335x-linux/commit/
> 7e72f5ed4b702c9373d19f7626f07ae31a381d53#arch/arm/Makefile

Alternatively you can run a current u-boot master build for am335x and
the appended dtb is no longer required.

> 6. Modified 9/13 patch to apply properly on latest am33xx.dtsi.
> a. Edma portion as it is
> b. mmc portion as below
> mmc1: mmc@48060000 {
> compatible = "ti,omap3-hsmmc";
> ti,hwmods = "mmc1";
> ti,dual-volt;
> ti,needs-special-reset;
> bus-width = <4>;
> vmmc-supply = <&vmmc_reg>;
> dmas = <&edma 24
> &edma 25>;
> dma-names = "tx", "rx";
> };
> c. added mmc pinmux as-well
>
> 7. make CROSS_COMPILE=arm-arago-linux-gnueabi- ARCH=arm distclean
> make CROSS_COMPILE=arm-arago-linux-gnueabi- ARCH=arm
> omap2plus_defconfig
>
> 8. enabled TI_EDMA from menuconfig (since it was not enabled for
> omap2plus_defconfig
>
> 9. make CROSS_COMPILE=arm-arago-linux-gnueabi- ARCH=arm uImage
> make CROSS_COMPILE=arm-arago-linux-gnueabi- ARCH=arm
> uImage-dtb.am335x-evm
>
> With above changes, edma probe was failing at request_mem_region()
> Inside linux-next/arch/arm/common/edma.c --> edma_probe()
>
> I had to modify edma_probe as below
>
>
> diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
> index f337f81..efe2673 100644
> --- a/arch/arm/common/edma.c
> +++ b/arch/arm/common/edma.c
> @@ -1589,11 +1589,11 @@ static int __init edma_probe(struct platform_device *pdev)
> for (j = 0; j < EDMA_MAX_CC; j++) {
> if (node) {
> int err;
> - err = of_address_to_resource(node, 0, &res[j]);
> + err = of_address_to_resource(node, j, &res[j]);
> if (err) {
> dev_err(dev,
> "unable to find 'reg' property\n");
> - return -EIO;
> + //return -EIO;
> }
> r[j] = &res[j];

Hrm, looks like a dts issue if it can't find the reg resource on your
integration of this. In any case, I'll look at it in v2.

> With this I was able to boot on am335x-evm and do a successful MMC
> copy-md5sum-compare test.

Great! Thanks for testing this.

> I believe you are looking into above issue in your v2 version.

Yes.

-Matt

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2012-09-26 15:41    [W:2.018 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site