lkml.org 
[lkml]   [2012]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/1] drivers: bus: Move the OMAP interconnect driver to drivers/bus/
* Arnd Bergmann <arnd@arndb.de> [120919 11:59]:
> On Monday 17 September 2012, Tony Lindgren wrote:
> > * Santosh Shilimkar <santosh.shilimkar@ti.com> [120914 02:21]:
> > > OMAP interconnect drivers are used for the interconnect error handling.
> > > Since they are bus driver, lets move it to newly created drivers/bus.
> > >
> > > Cc: Arnd Bergmann <arnd@arndb.de>
> > > Cc: Tony Lindgren <tony@atomide.com>
> > > Tested-by: Lokesh Vutla <lokeshvutla@ti.com>
> > > Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> > > ---
> > > Patch just moves OMAP interconnect drivers as is to the newly created
> > > driver/bus/* directory. Patch is generated against "arm-soc/drivers/ocp2scp"
> > > tree and test on all OMAP boards.
> >
> > Great, looks like this should not conflict with other
> > omap patches queued, so Arnd should probably take this into
> > the bus branch:
> >
> > Acked-by: Tony Lindgren <tony@atomide.com>
>
> It turns out that the patch actually did conflict and we now have a broken
> omap2plus_defconfig. The patch below seems to fix it, but please verify
> that this makes sense.

Heh a conflict caused by hard coded irqs for the error message :)
Looks like a good fix that removes some unncecessary dependencies:

Acked-by: Tony Lindgren <tony@atomide.com>

> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
>
> diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
> index f447e02..ab911a3 100644
> --- a/drivers/bus/omap_l3_noc.c
> +++ b/drivers/bus/omap_l3_noc.c
> @@ -28,7 +28,6 @@
> #include <linux/kernel.h>
> #include <linux/slab.h>
>
> -#include "soc.h"
> #include "omap_l3_noc.h"
>
> /*
> @@ -191,7 +190,7 @@ static int __devinit omap4_l3_probe(struct platform_device *pdev)
> IRQF_DISABLED, "l3-dbg-irq", l3);
> if (ret) {
> pr_crit("L3: request_irq failed to register for 0x%x\n",
> - 9 + OMAP44XX_IRQ_GIC_START);
> + l3->debug_irq);
> goto err3;
> }
>
> @@ -201,7 +200,7 @@ static int __devinit omap4_l3_probe(struct platform_device *pdev)
> IRQF_DISABLED, "l3-app-irq", l3);
> if (ret) {
> pr_crit("L3: request_irq failed to register for 0x%x\n",
> - 10 + OMAP44XX_IRQ_GIC_START);
> + l3->app_irq);
> goto err4;
> }
>


\
 
 \ /
  Last update: 2012-09-19 22:01    [W:0.575 / U:2.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site