lkml.org 
[lkml]   [2012]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] arm/dts: AM33XX: Add SPI device tree data
Date
Add McSPI data node to AM33XX device tree file. The McSPI module (and so
as the driver) is reused from OMAP4.

Signed-off-by: Philip, Avinash <avinashphilip@ti.com>
Tested-by: Matt Porter <mporter@ti.com>
---
Changes since v1:
- Corrected reg offset in reg DT entry.

:100644 100644 ff3badb... 065fd54... M arch/arm/boot/dts/am33xx.dtsi
arch/arm/boot/dts/am33xx.dtsi | 25 +++++++++++++++++++++++++
1 files changed, 25 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index ff3badb..065fd54 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -219,5 +219,30 @@
interrupt-parent = <&intc>;
interrupts = <91>;
};
+
+ spi0: spi@48030000 {
+ compatible = "ti,omap4-mcspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x48030000 0x400>;
+ interrupt-parent = <&intc>;
+ interrupt = <65>;
+ ti,spi-num-cs = <2>;
+ ti,hwmods = "spi0";
+ status = "disabled";
+
+ };
+
+ spi1: spi@481a0000 {
+ compatible = "ti,omap4-mcspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x481a0000 0x400>;
+ interrupt-parent = <&intc>;
+ interrupt = <125>;
+ ti,spi-num-cs = <2>;
+ ti,hwmods = "spi1";
+ status = "disabled";
+ };
};
};
--
1.7.4.1


\
 
 \ /
  Last update: 2012-09-18 08:21    [W:0.074 / U:1.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site