lkml.org 
[lkml]   [2012]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/7] dw_dmac: autoconfigure block_size or use platform data
Date
The maximum block size is a configurable parameter for the chip. So, driver
will try to get it from the encoded component parameters. Otherwise it will
come from the platform data.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
arch/arm/mach-spear13xx/spear13xx.c | 1 +
arch/avr32/mach-at32ap/at32ap700x.c | 1 +
drivers/dma/dw_dmac.c | 34 ++++++++++++++++++----------------
drivers/dma/dw_dmac_regs.h | 3 +++
include/linux/dw_dmac.h | 2 ++
5 files changed, 25 insertions(+), 16 deletions(-)

diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c
index cf936b1..c64d812 100644
--- a/arch/arm/mach-spear13xx/spear13xx.c
+++ b/arch/arm/mach-spear13xx/spear13xx.c
@@ -78,6 +78,7 @@ struct dw_dma_platform_data dmac_plat_data = {
.nr_channels = 8,
.chan_allocation_order = CHAN_ALLOCATION_DESCENDING,
.chan_priority = CHAN_PRIORITY_DESCENDING,
+ .block_size = 4095U,
};

void __init spear13xx_l2x0_init(void)
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 0445c4f..2c4aefe 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -605,6 +605,7 @@ static void __init genclk_init_parent(struct clk *clk)

static struct dw_dma_platform_data dw_dmac0_data = {
.nr_channels = 3,
+ .block_size = 4095U,
};

static struct resource dw_dmac0_resource[] = {
diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c
index 2a3b730..ab718ee 100644
--- a/drivers/dma/dw_dmac.c
+++ b/drivers/dma/dw_dmac.c
@@ -58,16 +58,6 @@
})

/*
- * This is configuration-dependent and usually a funny size like 4095.
- *
- * Note that this is a transfer count, i.e. if we transfer 32-bit
- * words, we can do 16380 bytes per descriptor.
- *
- * This parameter is also system-specific.
- */
-#define DWC_MAX_COUNT 4095U
-
-/*
* Number of descriptors to allocate for each channel. This should be
* made configurable somehow; preferably, the clients (at least the
* ones using slave transfers) should be able to give us a hint.
@@ -669,7 +659,7 @@ dwc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,

for (offset = 0; offset < len; offset += xfer_count << src_width) {
xfer_count = min_t(size_t, (len - offset) >> src_width,
- DWC_MAX_COUNT);
+ dwc->block_size);

desc = dwc_desc_get(dwc);
if (!desc)
@@ -770,8 +760,8 @@ slave_sg_todev_fill_desc:
desc->lli.sar = mem;
desc->lli.dar = reg;
desc->lli.ctllo = ctllo | DWC_CTLL_SRC_WIDTH(mem_width);
- if ((len >> mem_width) > DWC_MAX_COUNT) {
- dlen = DWC_MAX_COUNT << mem_width;
+ if ((len >> mem_width) > dwc->block_size) {
+ dlen = dwc->block_size << mem_width;
mem += dlen;
len -= dlen;
} else {
@@ -830,8 +820,8 @@ slave_sg_fromdev_fill_desc:
desc->lli.sar = reg;
desc->lli.dar = mem;
desc->lli.ctllo = ctllo | DWC_CTLL_DST_WIDTH(mem_width);
- if ((len >> reg_width) > DWC_MAX_COUNT) {
- dlen = DWC_MAX_COUNT << reg_width;
+ if ((len >> reg_width) > dwc->block_size) {
+ dlen = dwc->block_size << reg_width;
mem += dlen;
len -= dlen;
} else {
@@ -1214,7 +1204,7 @@ struct dw_cyclic_desc *dw_dma_cyclic_prep(struct dma_chan *chan,
periods = buf_len / period_len;

/* Check for too big/unaligned periods and unaligned DMA buffer. */
- if (period_len > (DWC_MAX_COUNT << reg_width))
+ if (period_len > (dwc->block_size << reg_width))
goto out_err;
if (unlikely(period_len & ((1 << reg_width) - 1)))
goto out_err;
@@ -1380,6 +1370,7 @@ static int __devinit dw_probe(struct platform_device *pdev)
bool autocfg;
unsigned int dw_params;
unsigned int nr_channels;
+ unsigned int max_blk_size;
int irq;
int err;
int i;
@@ -1420,6 +1411,9 @@ static int __devinit dw_probe(struct platform_device *pdev)

dw->regs = regs;

+ /* get hardware configuration parameters */
+ max_blk_size = dma_readl(dw, MAX_BLK_SIZE);
+
/* Calculate all channel mask before DMA setup */
dw->all_chan_mask = (1 << nr_channels) - 1;

@@ -1465,6 +1459,14 @@ static int __devinit dw_probe(struct platform_device *pdev)
INIT_LIST_HEAD(&dwc->free_list);

channel_clear_bit(dw, CH_EN, dwc->mask);
+
+ /* hardware configuration */
+ if (autocfg) {
+ dwc->block_size =
+ (4 << ((max_blk_size >> 4 * i) & 0xf)) - 1;
+ } else {
+ dwc->block_size = pdata->block_size;
+ }
}

/* Clear all interrupts on all channels. */
diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h
index 0f96965..233f5e5 100644
--- a/drivers/dma/dw_dmac_regs.h
+++ b/drivers/dma/dw_dmac_regs.h
@@ -186,6 +186,9 @@ struct dw_dma_chan {

unsigned int descs_allocated;

+ /* hardware configuration */
+ unsigned short block_size;
+
/* configuration passed via DMA_SLAVE_CONFIG */
struct dma_slave_config dma_sconfig;
};
diff --git a/include/linux/dw_dmac.h b/include/linux/dw_dmac.h
index 2412e02..3315ef9 100644
--- a/include/linux/dw_dmac.h
+++ b/include/linux/dw_dmac.h
@@ -19,6 +19,7 @@
* @nr_channels: Number of channels supported by hardware (max 8)
* @is_private: The device channels should be marked as private and not for
* by the general purpose DMA channel allocator.
+ * @block_size: Maximum block size supported by the controller
*/
struct dw_dma_platform_data {
unsigned int nr_channels;
@@ -29,6 +30,7 @@ struct dw_dma_platform_data {
#define CHAN_PRIORITY_ASCENDING 0 /* chan0 highest */
#define CHAN_PRIORITY_DESCENDING 1 /* chan7 highest */
unsigned char chan_priority;
+ unsigned short block_size;
};

/* bursts size */
--
1.7.10.4


\
 
 \ /
  Last update: 2012-09-17 10:21    [W:0.235 / U:1.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site