lkml.org 
[lkml]   [2012]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] memory-hotplug: don't replace lowmem pages with highmem
On Wed, 12 Sep 2012 10:43:51 +0900
Minchan Kim <minchan@kernel.org> wrote:

> [1] reporeted that lowmem pages could be replaced by
> highmem pages during migration of CMA and fixed.
>
> Quote from [1]'s description
> "
> The filesystem layer expects pages in the block device's mapping to not
> be in highmem (the mapping's gfp mask is set in bdget()), but CMA can
> currently replace lowmem pages with highmem pages, leading to crashes in
> filesystem code such as the one below:
>
> Unable to handle kernel NULL pointer dereference at virtual address 00000400
> pgd = c0c98000
> [00000400] *pgd=00c91831, *pte=00000000, *ppte=00000000
> Internal error: Oops: 817 [#1] PREEMPT SMP ARM
> CPU: 0 Not tainted (3.5.0-rc5+ #80)
> PC is at __memzero+0x24/0x80
> ...
> Process fsstress (pid: 323, stack limit = 0xc0cbc2f0)
> Backtrace:
> [<c010e3f0>] (ext4_getblk+0x0/0x180) from [<c010e58c>] (ext4_bread+0x1c/0x98)
> [<c010e570>] (ext4_bread+0x0/0x98) from [<c0117944>] (ext4_mkdir+0x160/0x3bc)
> r4:c15337f0
> [<c01177e4>] (ext4_mkdir+0x0/0x3bc) from [<c00c29e0>] (vfs_mkdir+0x8c/0x98)
> [<c00c2954>] (vfs_mkdir+0x0/0x98) from [<c00c2a60>] (sys_mkdirat+0x74/0xac)
> r6:00000000 r5:c152eb40 r4:000001ff r3:c14b43f0
> [<c00c29ec>] (sys_mkdirat+0x0/0xac) from [<c00c2ab8>] (sys_mkdir+0x20/0x24)
> r6:beccdcf0 r5:00074000 r4:beccdbbc
> [<c00c2a98>] (sys_mkdir+0x0/0x24) from [<c000e3c0>] (ret_fast_syscall+0x0/0x30)
> "
>
> Memory-hotplug has same problem with CMA so [1]'s fix could be applied
> with memory-hotplug, too.
>
> Fix it by reusing.

Do we think this issue should be fixed in 3.6? Earlier?

> @@ -809,8 +802,12 @@ do_migrate_range(unsigned long start_pfn, unsigned long end_pfn)
> putback_lru_pages(&source);
> goto out;
> }
> - /* this function returns # of failed pages */
> - ret = migrate_pages(&source, hotremove_migrate_alloc, 0,
> +
> + /*
> + * alloc_migrate_target should be improooooved!!

Not a helpful comment! If you've identified some improvement then
please do provide all the details.

> + * migrate_pages returns # of failed pages.
> + */
> + ret = migrate_pages(&source, alloc_migrate_target, 0,
> true, MIGRATE_SYNC);
> if (ret)
> putback_lru_pages(&source);



\
 
 \ /
  Last update: 2012-09-13 00:21    [W:0.075 / U:1.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site