lkml.org 
[lkml]   [2012]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 00/11] ASoC: OMAP: Convert to use dmaengine
Date
Hello,

This series will switch the OMAP audio to use dmaengine.
The final patch which does the switch was based on Russell King's earlier patch.

The first 10 patch is to prepare the OMAP audio drivers for a smooth change to
dmaengine:
- sDMA FRAME sync mode is removed and replaced with PACKET mode
- dai drivers no longer need to configure sDMA sync mode
- dai drivers does not need to specify the DMA word length - with the exception
of the omap-hdmi driver which requires 32bit word length regardless of the
audio format in use
- the McPDM driver used (to my surprise) hackish way of getting the DMA channel
and address - via defines from some header files

I have tested the series on:
- BeagleBoard (audio via McBSP) with aplay/arecord. In element mode and in
threshold mode with different period sizes
- OMAP4 Blaze (audio via McPDM and DMIC)

With this conversion the NO_PERIOD_WAKEUP is not supported at the moment. I'll
be looking at the dmaengine core and omap parts to add this feature back.

The patches has been generated against:
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-3.7

Janusz: Can you retest this series on OMAP1 to be sure I have not broken it?
Ricardo: Can you test the omap-hmdi if it is still working?

Regards,
Peter
---
Peter Ujfalusi (11):
dmaengine: omap: Support for element mode in cyclic DMA
ASoC: omap-mcbsp: Use sDMA packet mode instead of frame mode
ASoC: omap-pcm: Select sDMA synchronization based on packet_size
ASoC: OMAP: Remove sync_mode from omap_pcm_dma_data struct
ASoC: omap-pcm: Prepare to configure the DMA data_type based on
stream properties
ARM: OMAP4: hwmod_data: Add resource names to McPDM memory ranges
ASoC: omap-mcpdm: Use platform_get_resource_* to get resources
ASoC: OMAP: mcbsp, mcpdm, dmic: Let omap-pcm to pick the dma_type
ASoC: omap-pcm, omap-hdmi: Change the use of
omap_pcm_dma_data->data_type
ASoC: OMAP: mcbsp, mcpdm, dmic, hdmi: Set dma_data at startup time
ASoC: omap-pcm: Convert to use dmaengine

arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 2 +
drivers/dma/omap-dma.c | 5 +-
sound/soc/omap/Kconfig | 3 +-
sound/soc/omap/omap-dmic.c | 9 +-
sound/soc/omap/omap-hdmi.c | 17 +-
sound/soc/omap/omap-mcbsp.c | 60 +++----
sound/soc/omap/omap-mcpdm.c | 41 +++--
sound/soc/omap/omap-pcm.c | 246 ++++++++---------------------
sound/soc/omap/omap-pcm.h | 4 +-
9 files changed, 136 insertions(+), 251 deletions(-)

--
1.7.12



\
 
 \ /
  Last update: 2012-09-12 14:21    [W:0.135 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site