lkml.org 
[lkml]   [2012]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 02/14] drivers/tty/serial/amba-pl0{10,11}.c: use clk_prepare_enable and clk_disable_unprepare
From: Julia Lawall <Julia.Lawall@lip6.fr>

Clk_prepare_enable and clk_disable_unprepare combine clk_prepare and
clk_enable, and clk_disable and clk_unprepare. The9 make the code more
concise, and ensure that clk_unprepare is called when clk_enable fails.

A simplified version of the semantic patch that introduces calls to these
functions is as follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e;
@@

- clk_prepare(e);
- clk_enable(e);
+ clk_prepare_enable(e);

@@
expression e;
@@

- clk_disable(e);
- clk_unprepare(e);
+ clk_disable_unprepare(e);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
---

The patch was taken from the TTY tree.

If this patch rejects because 'already applied', this means that your
tree is probably based on TTY tree or -next (e.g. -mm). In which case
you don't need this patch, just drop it.

If your tree is based on Linus' tree, you need this patch to not bring
horrible conflicts into -next.

drivers/tty/serial/amba-pl010.c | 15 ++++-----------
drivers/tty/serial/amba-pl011.c | 15 ++++-----------
2 files changed, 8 insertions(+), 22 deletions(-)

diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 0d91a54..22317dd 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -312,16 +312,12 @@ static int pl010_startup(struct uart_port *port)
struct uart_amba_port *uap = (struct uart_amba_port *)port;
int retval;

- retval = clk_prepare(uap->clk);
- if (retval)
- goto out;
-
/*
* Try to enable the clock producer.
*/
- retval = clk_enable(uap->clk);
+ retval = clk_prepare_enable(uap->clk);
if (retval)
- goto clk_unprep;
+ goto out;

uap->port.uartclk = clk_get_rate(uap->clk);

@@ -346,9 +342,7 @@ static int pl010_startup(struct uart_port *port)
return 0;

clk_dis:
- clk_disable(uap->clk);
- clk_unprep:
- clk_unprepare(uap->clk);
+ clk_disable_unprepare(uap->clk);
out:
return retval;
}
@@ -375,8 +369,7 @@ static void pl010_shutdown(struct uart_port *port)
/*
* Shut down the clock producer
*/
- clk_disable(uap->clk);
- clk_unprepare(uap->clk);
+ clk_disable_unprepare(uap->clk);
}

static void
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 92b1ac8..3322023 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1324,16 +1324,12 @@ static int pl011_startup(struct uart_port *port)
"could not set default pins\n");
}

- retval = clk_prepare(uap->clk);
- if (retval)
- goto out;
-
/*
* Try to enable the clock producer.
*/
- retval = clk_enable(uap->clk);
+ retval = clk_prepare_enable(uap->clk);
if (retval)
- goto clk_unprep;
+ goto out;

uap->port.uartclk = clk_get_rate(uap->clk);

@@ -1411,9 +1407,7 @@ static int pl011_startup(struct uart_port *port)
return 0;

clk_dis:
- clk_disable(uap->clk);
- clk_unprep:
- clk_unprepare(uap->clk);
+ clk_disable_unprepare(uap->clk);
out:
return retval;
}
@@ -1473,8 +1467,7 @@ static void pl011_shutdown(struct uart_port *port)
/*
* Shut down the clock producer
*/
- clk_disable(uap->clk);
- clk_unprepare(uap->clk);
+ clk_disable_unprepare(uap->clk);
/* Optionally let pins go into sleep states */
if (!IS_ERR(uap->pins_sleep)) {
retval = pinctrl_select_state(uap->pinctrl, uap->pins_sleep);
--
1.7.11.5


\
 
 \ /
  Last update: 2012-09-10 07:01    [W:0.102 / U:0.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site