lkml.org 
[lkml]   [2012]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: How to get the irq flags from the dts file
On Thu, Aug 09, 2012 at 11:48:42AM +0000, Arnd Bergmann wrote:
> On Thursday 09 August 2012, Wei Ni wrote:

> > The wlan driver wish this flags include the IRQF_TRGGER_* information,
> > and it will use this flags to configure other hw settings. If it is
> > wrong, the wlan can't work.

You can read the configuration with irqd_get_trigger_type() - see the OF
code in sound/soc/codecs/wm8903.c for an example.

> The driver should not need to know about thie flag. It gets read
> by irq_create_of_mapping when calling teh xlate function and
> gets set using irq_set_irq_type from there too.

That only helps the interrupt controller, it doesn't help the interrupt
source. A good proportion of embedded devices have a great deal of
flexibility in how they signal interrupts so they need to know what mode
to pick.


\
 
 \ /
  Last update: 2012-08-09 14:41    [W:0.055 / U:3.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site