lkml.org 
[lkml]   [2012]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: i2c-eg20t: regression since i2c_add_numbered_adapter change
Hi Jean,

Thanks for the explanation and bring up some history background of those
i2c core APIs!


It was several month ago that I maintained a Tizen kernel for Intel EG20T
based platforms when I cooked the patch, so loop in current maintainer Artem.


On Wed, 29 Aug 2012 20:40:31 +0200
Jean Delvare <khali@linux-fr.org> wrote:

> Hi guys,
>
> Sorry for joining the discussion a little late, I was on vacation.
>
> On Thu, 23 Aug 2012 16:28:52 +0800, Feng Tang wrote:
> > On Wed, 22 Aug 2012 11:17:51 +0200
> > Alexander Stein <alexander.stein@systec-electronic.com> wrote:
> > > Am Mittwoch, 22. August 2012, 16:04:39 schrieb Feng Tang:
> > > > > Why use a fixed one? Give the driver (and maybe every i2c bus driver) a parameter which sets the base bus number it should use.
> > > > > E.g. i2c-eg20t.base-bus-num=2 so it will register the bus numbers starting from 2. If this parameter is unset. It would use the first free one, thus simply using i2c_add_adapter.
>
> Looks like what media and sound drivers are/were doing to assign fixed
> numbers to their devices. But my understanding is that this is a legacy
> thing and nobody should need to use that any longer. Adding this to all
> or even some i2c bus drivers looks like the wrong example to follow. If
> your system has more than one device supported by the driver, it
> doesn't even reliably guarantee fixed I2C bus numbers (especially if
> some can be hot-plugged.)
>
> > > > The reason we need a fixed number is it is easier for platform code
> > > > which needs to register dozens of i2c devices to different controllers
> > > > with i2c_register_board_info, and they need provide a bus number for
> > > > each i2c device, this _binding_ info is not detectable but have to
> > > > be fixed.
>
> Whenever you call i2c_register_board_info(), every I2C bus number
> referenced in the I2C device list passed as a parameter is reserved for
> static I2C bus numbers, dynamic I2C bus numbers will never overlap.
>
> So in the quoted example, if i2c-isch is able to dynamically pick I2C
> bus number 0 while i2c-eg20t want it statically, it means that either
> no device was declared on bus 0 with i2c_register_board_info(), or
> i2c_register_board_info() was called too late in the game.

Exactly, in our own code base, I did write a platform driver in
drivers/platform/x86, which calls the i2c_register_board_info in a
subsys_initcall, which protect us from seeing this issue reported by
Alexander and work just fine. But since that platform is not a product
one, we didn't push it into mainline.

>
> Note that there was an assumption at the time the code was written,
> that there was no need or reason to reserve a static I2C bus number if
> no slave device was declared on said I2C bus. I never much liked it but
> it never caused problems so far. This means that either:
> * you call i2c_register_board_info() to register your slave I2C devices
> and all the affected I2C bus drivers call i2c_add_numbered_adapter();
> or
> * you don't call i2c_register_board_info() and all I2C bus drivers call
> i2c_add_adapter().
> You can't mix, i.e. if you don't register any slave device on a bus but
> the bus driver still calls i2c_add_numbered_adapter(), it may fail.
>
> If this is a problem now on some systems, it should be easy enough to
> work around by adding a specific function to reserve an I2C bus number
> for static allocation, even without declaring any slave device on it.
> This function would be called at the same time
> i2c_register_board_info() typically is.

> > Yeah, our EG20T kernel used to use the same "echo /sys/bus/i2c/devices/i2c-x/new_device"
> > way, but we found out it is not convenient for:
> > 1. needs extra user space script, why not make it just work in kernel after
> > boot? We have several i2c devices like touchscreen/radio which we wants them
> > just work without depending user space action.
>
> It should indeed be handled all in kernel space, using
> i2c_register_board_info().

Can't agree more, this is what we are doing now.

>
> > 2. The i2c bus number is not fixed, which make the user space script even
> > harder, as that number depends whether we compile into kernel all the i2c
> > controllers (eg20t and isch) and whether these driver are compiled as
> > modules and their loading order.
>
> You can always look-up the right I2C bus number based on its name,
> assuming your driver properly names them. There is some code doing that
> at:
> http://www.lm-sensors.org/browser/i2c-tools/trunk/tools/i2cbusses.c#L297
>
> Ideally this code should move to libi2c and/or i2cdetect should offer
> an interface to it, so it can easily be called from custom tools and
> scripts.
>
> > Thus we come out with this fixed bus number registering.
> >
> > As I said before, either your module parameter "base_bus_num" solution
> > or my fixed bus number offset are ok to me. Will you cook a patch?
>
> I think the real problem you have here is that your platform setup code
> doesn't (or is not able to) allocate the bus IDs globally. It really
> should. If you have an embedded system using both i2c-eg20t and
> i2c-isch, the platform setup code should decide upfront who gets what
> I2C bus IDs, otherwise it's impossible to declare slave devices on
> these I2C buses. And these bus drivers should have a way to look-up
> that decision and ask for the proper bus numbers.
>
> At the moment it seems that i2c-ge20t assumes it always gets i2c-0 (and
> sometimes i2c-1 too) for itself. This is wrong. The actual bus numbers
> should come from a device tree of some sort. If you look at other i2c
> bus drivers for other embedded platforms (for example i2c-pxa), you'll
> see they do exactly that, i.e. the I2C bus number is part of device
> platform data (often the platform device ID but it could be anything
> else), it's not hard-coded in the driver. It may be a little more
> difficult to get right for a PCI driver like i2c-eg20t, but you'll have
> to find a way. Relying on boot parameters to get things to work is just
> too fragile.

Yes, ideally we need some method like the device tree or the ACPI 5.0 which
has the global info of how many i2c buses and devices there are in the
platform and how they get connected. But for current existing EG20T
platforms, I prefer to use your statically i2c_register_board_info +
i2c_add_numbered_adapter solution.

Thanks,
Feng



\
 
 \ /
  Last update: 2012-08-30 12:01    [W:0.071 / U:0.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site