lkml.org 
[lkml]   [2012]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V4 07/16] MIPS: Loongson 3: Add IRQ init and dispatch support.
Date
IRQ routing path of Loongson-3:
Devices(most) --> I8259 --> HT Controller --> IRQ Routing Table --> CPU
^
|
Device(legacy devices such as UART) --> Bonito ---|

IRQ Routing Table route 32 INTs to CPU's INT0~INT3(IP2~IP5 of CP0), 32
INTs include 16 HT INTs(mostly), 4 PCI INTs, 1 LPC INT, etc. IP6 is used
for IPI and IP7 is used for internal MIPS timer. LOONGSON_INT_ROUTER_*
are IRQ Routing Table registers.

I8259 IRQs are 1:1 mapped to HT1 INTs. LOONGSON_HT1_* are configuration
registers of HT1 controller.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Hongliang Tao <taohl@lemote.com>
Signed-off-by: Hua Yan <yanh@lemote.com>
---
arch/mips/include/asm/mach-loongson/irq.h | 24 +++++++
arch/mips/include/asm/mach-loongson/loongson.h | 9 +++
arch/mips/loongson/Makefile | 6 ++
arch/mips/loongson/loongson-3/Makefile | 4 +
arch/mips/loongson/loongson-3/irq.c | 87 ++++++++++++++++++++++++
5 files changed, 130 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/include/asm/mach-loongson/irq.h
create mode 100644 arch/mips/loongson/loongson-3/Makefile
create mode 100644 arch/mips/loongson/loongson-3/irq.c

diff --git a/arch/mips/include/asm/mach-loongson/irq.h b/arch/mips/include/asm/mach-loongson/irq.h
new file mode 100644
index 0000000..4787cd0
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/irq.h
@@ -0,0 +1,24 @@
+#ifndef __ASM_MACH_LOONGSON_IRQ_H_
+#define __ASM_MACH_LOONGSON_IRQ_H_
+
+#include <boot_param.h>
+
+/* cpu core interrupt numbers */
+#define MIPS_CPU_IRQ_BASE 56
+
+#ifdef CONFIG_CPU_LOONGSON3
+
+#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 2) /* uart */
+#define LOONGSON_I8259_IRQ (MIPS_CPU_IRQ_BASE + 3) /* i8259 */
+#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* cpu timer */
+
+#define LOONGSON_HT1_CFG_BASE ht_control_base
+#define LOONGSON_HT1_INT_VECTOR_BASE LOONGSON_HT1_CFG_BASE + 0x80
+#define LOONGSON_HT1_INT_EN_BASE LOONGSON_HT1_CFG_BASE + 0xa0
+#define LOONGSON_HT1_INT_VECTOR(n) LOONGSON3_REG32(LOONGSON_HT1_INT_VECTOR_BASE, 4 * n)
+#define LOONGSON_HT1_INTN_EN(n) LOONGSON3_REG32(LOONGSON_HT1_INT_EN_BASE, 4 * n)
+
+#endif
+
+#include_next <irq.h>
+#endif /* __ASM_MACH_LOONGSON_IRQ_H_ */
diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h
index 960811a..f573e47 100644
--- a/arch/mips/include/asm/mach-loongson/loongson.h
+++ b/arch/mips/include/asm/mach-loongson/loongson.h
@@ -62,6 +62,12 @@ extern int mach_i8259_irq(void);
#define LOONGSON_REG(x) \
(*(volatile u32 *)((char *)CKSEG1ADDR(LOONGSON_REG_BASE) + (x)))

+#define LOONGSON3_REG8(base, x) \
+ (*(volatile u8 *)((char *)TO_UNCAC(base) + (x)))
+
+#define LOONGSON3_REG32(base, x) \
+ (*(volatile u32 *)((char *)TO_UNCAC(base) + (x)))
+
#define LOONGSON_IRQ_BASE 32
#define LOONGSON2_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */

@@ -87,6 +93,9 @@ static inline void do_perfcnt_IRQ(void)
#define LOONGSON_REG_BASE 0x1fe00000
#define LOONGSON_REG_SIZE 0x00100000 /* 256Bytes + 256Bytes + ??? */
#define LOONGSON_REG_TOP (LOONGSON_REG_BASE+LOONGSON_REG_SIZE-1)
+#define LOONGSON3_REG_BASE 0x3ff00000
+#define LOONGSON3_REG_SIZE 0x00100000 /* 256Bytes + 256Bytes + ??? */
+#define LOONGSON3_REG_TOP (LOONGSON3_REG_BASE+LOONGSON3_REG_SIZE-1)

#define LOONGSON_LIO1_BASE 0x1ff00000
#define LOONGSON_LIO1_SIZE 0x00100000 /* 1M */
diff --git a/arch/mips/loongson/Makefile b/arch/mips/loongson/Makefile
index 2b76cb0..b1e4f05 100644
--- a/arch/mips/loongson/Makefile
+++ b/arch/mips/loongson/Makefile
@@ -15,3 +15,9 @@ obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/
#

obj-$(CONFIG_LEMOTE_MACH2F) += lemote-2f/
+
+#
+# All Loongson-3 family machines
+#
+
+obj-$(CONFIG_CPU_LOONGSON3) += loongson-3/
diff --git a/arch/mips/loongson/loongson-3/Makefile b/arch/mips/loongson/loongson-3/Makefile
new file mode 100644
index 0000000..b9968cd
--- /dev/null
+++ b/arch/mips/loongson/loongson-3/Makefile
@@ -0,0 +1,4 @@
+#
+# Makefile for Loongson-3 family machines
+#
+obj-y += irq.o
diff --git a/arch/mips/loongson/loongson-3/irq.c b/arch/mips/loongson/loongson-3/irq.c
new file mode 100644
index 0000000..27aef31
--- /dev/null
+++ b/arch/mips/loongson/loongson-3/irq.c
@@ -0,0 +1,87 @@
+#include <loongson.h>
+#include <irq.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/i8259.h>
+#include <asm/mipsregs.h>
+
+#define LOONGSON_INT_ROUTER_OFFSET 0x1400
+#define LOONGSON_INT_ROUTER_INTEN LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x24)
+#define LOONGSON_INT_ROUTER_INTENSET LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x28)
+#define LOONGSON_INT_ROUTER_INTENCLR LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x2c)
+#define LOONGSON_INT_ROUTER_ENTRY(n) LOONGSON3_REG8(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + n)
+#define LOONGSON_INT_ROUTER_LPC LOONGSON_INT_ROUTER_ENTRY(0x0a)
+#define LOONGSON_INT_ROUTER_HT1(n) LOONGSON_INT_ROUTER_ENTRY(n + 0x18)
+
+#define LOONGSON_INT_CORE0_INT0 0x11 /* route to int 0 of core 0 */
+#define LOONGSON_INT_CORE0_INT1 0x21 /* route to int 1 of core 0 */
+
+extern void loongson3_ipi_interrupt(struct pt_regs *regs);
+
+static void ht_irqdispatch(void)
+{
+ unsigned int i, irq;
+ unsigned int ht_irq[] = {1, 3, 4, 5, 6, 7, 8, 12, 14, 15};
+
+ irq = LOONGSON_HT1_INT_VECTOR(0);
+ LOONGSON_HT1_INT_VECTOR(0) = irq;
+
+ for (i = 0; i < (sizeof(ht_irq) / sizeof(*ht_irq)); i++) {
+ if (irq & (0x1 << ht_irq[i]))
+ do_IRQ(ht_irq[i]);
+ }
+}
+
+void mach_irq_dispatch(unsigned int pending)
+{
+ if (pending & CAUSEF_IP7)
+ do_IRQ(LOONGSON_TIMER_IRQ);
+#if defined(CONFIG_SMP)
+ else if (pending & CAUSEF_IP6)
+ loongson3_ipi_interrupt(NULL);
+#endif
+ else if (pending & CAUSEF_IP3)
+ ht_irqdispatch();
+ else if (pending & CAUSEF_IP2)
+ do_IRQ(LOONGSON_UART_IRQ);
+ else {
+ printk(KERN_ERR "%s : spurious interrupt\n", __func__);
+ spurious_interrupt();
+ }
+}
+
+static struct irqaction cascade_irqaction = {
+ .handler = no_action,
+ .name = "cascade",
+};
+
+void irq_router_init(void)
+{
+ int i;
+
+ /* route LPC int to cpu core0 int 0 */
+ LOONGSON_INT_ROUTER_LPC = LOONGSON_INT_CORE0_INT0;
+ /* route HT1 int0 ~ int7 to cpu core0 INT1*/
+ for (i = 0; i < 8; i++)
+ LOONGSON_INT_ROUTER_HT1(i) = LOONGSON_INT_CORE0_INT1;
+ /* enable HT1 interrupt */
+ LOONGSON_HT1_INTN_EN(0) = 0xffffffff;
+ /* enable router interrupt intenset */
+ LOONGSON_INT_ROUTER_INTENSET = LOONGSON_INT_ROUTER_INTEN | (0xffff << 16) | 0x1 << 10;
+}
+
+void __init mach_init_irq(void)
+{
+ clear_c0_status(ST0_IM | ST0_BEV);
+
+ irq_router_init();
+ mips_cpu_irq_init();
+ init_i8259_irqs();
+
+ /* setup i8259 irq */
+ setup_irq(LOONGSON_I8259_IRQ, &cascade_irqaction);
+
+ set_c0_status(STATUSF_IP2 | STATUSF_IP6);
+}
--
1.7.7.3


\
 
 \ /
  Last update: 2012-08-03 09:41    [W:0.100 / U:5.264 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site