lkml.org 
[lkml]   [2012]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
Subject[PATCH v11 0/4] AT91: replace old i2c-at91.c TWI driver
The old driver has two main deficencies:
i) No repeated start (Sr) condiction is possible, this makes it unusable
e.g. for most SMBus transfers.
ii) I/O was done with polling/busy waiting what caused over-/underruns
even at light system loads and clock speeds.

The new driver overcomes these deficencies and in addition allows for
more than one TWI interface.

A remaining limitation is the fact, that only one repeated start is
possible (two concatenated messages). This limitation is imposed by
the hardware. However, this should not be a problem as all common
i2c-client communication does not rely on more than one repeated start.

Changes since v11:
- corrected wrong id_entry on sam9261 twi gpio pdev

Nikolaus Voss (4):
drivers/i2c/busses/i2c-at91.c: remove old polling driver
Replace clk_lookup.con_id with clk_lookup.dev_id entries for twi clk
drivers/i2c/busses/i2c-at91.c: add new driver
G45 TWI: remove open drain setting for twi function gpios

arch/arm/mach-at91/at91rm9200.c | 1 +
arch/arm/mach-at91/at91rm9200_devices.c | 9 +
arch/arm/mach-at91/at91sam9260.c | 1 +
arch/arm/mach-at91/at91sam9261.c | 1 +
arch/arm/mach-at91/at91sam9261_devices.c | 9 +
arch/arm/mach-at91/at91sam9263.c | 1 +
arch/arm/mach-at91/at91sam9g45.c | 2 +
arch/arm/mach-at91/at91sam9g45_devices.c | 6 -
arch/arm/mach-at91/at91sam9rl.c | 2 +
arch/arm/mach-at91/at91sam9x5.c | 3 +
arch/arm/mach-at91/include/mach/at91_twi.h | 68 ----
drivers/i2c/busses/Kconfig | 11 +-
drivers/i2c/busses/i2c-at91.c | 591 ++++++++++++++++++----------
13 files changed, 418 insertions(+), 287 deletions(-)
delete mode 100644 arch/arm/mach-at91/include/mach/at91_twi.h

--
1.7.9.5



\
 
 \ /
  Last update: 2012-08-29 11:01    [W:2.075 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site