lkml.org 
[lkml]   [2012]   [Aug]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [Qemu-devel] [PATCH v8 5/6] introduce a new qom device to deal with panicked event
On Wed, Aug 22, 2012 at 7:30 AM, Wen Congyang <wency@cn.fujitsu.com> wrote:
> At 08/09/2012 03:01 AM, Blue Swirl Wrote:
>> On Wed, Aug 8, 2012 at 2:47 AM, Wen Congyang <wency@cn.fujitsu.com> wrote:
>>> If the target is x86/x86_64, the guest's kernel will write 0x01 to the
>>> port KVM_PV_EVENT_PORT when it is panciked. This patch introduces a new
>>> qom device kvm_pv_ioport to listen this I/O port, and deal with panicked
>>> event according to panicked_action's value. The possible actions are:
>>> 1. emit QEVENT_GUEST_PANICKED only
>>> 2. emit QEVENT_GUEST_PANICKED and pause the guest
>>> 3. emit QEVENT_GUEST_PANICKED and poweroff the guest
>>> 4. emit QEVENT_GUEST_PANICKED and reset the guest
>>>
>>> I/O ports does not work for some targets(for example: s390). And you
>>> can implement another qom device, and include it's code into pv_event.c
>>> for such target.
>>>
>>> Note: if we emit QEVENT_GUEST_PANICKED only, and the management
>>> application does not receive this event(the management may not
>>> run when the event is emitted), the management won't know the
>>> guest is panicked.
>>>
>>> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
>>> ---
>>> hw/kvm/Makefile.objs | 2 +-
>>> hw/kvm/pv_event.c | 109 ++++++++++++++++++++++++++++++++++++++++++++++++++
>>> hw/kvm/pv_ioport.c | 93 ++++++++++++++++++++++++++++++++++++++++++
>>> hw/pc_piix.c | 9 ++++
>>> kvm.h | 2 +
>>> 5 files changed, 214 insertions(+), 1 deletions(-)
>>> create mode 100644 hw/kvm/pv_event.c
>>> create mode 100644 hw/kvm/pv_ioport.c
>>>
>>> diff --git a/hw/kvm/Makefile.objs b/hw/kvm/Makefile.objs
>>> index 226497a..23e3b30 100644
>>> --- a/hw/kvm/Makefile.objs
>>> +++ b/hw/kvm/Makefile.objs
>>> @@ -1 +1 @@
>>> -obj-$(CONFIG_KVM) += clock.o apic.o i8259.o ioapic.o i8254.o
>>> +obj-$(CONFIG_KVM) += clock.o apic.o i8259.o ioapic.o i8254.o pv_event.o
>>> diff --git a/hw/kvm/pv_event.c b/hw/kvm/pv_event.c
>>> new file mode 100644
>>> index 0000000..8897237
>>> --- /dev/null
>>> +++ b/hw/kvm/pv_event.c
>>> @@ -0,0 +1,109 @@
>>> +/*
>>> + * QEMU KVM support, paravirtual event device
>>> + *
>>> + * Copyright Fujitsu, Corp. 2012
>>> + *
>>> + * Authors:
>>> + * Wen Congyang <wency@cn.fujitsu.com>
>>> + *
>>> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
>>> + * See the COPYING file in the top-level directory.
>>> + *
>>> + */
>>> +
>>> +#include <linux/kvm_para.h>
>>> +#include <asm/kvm_para.h>
>>> +#include <qobject.h>
>>> +#include <qjson.h>
>>> +#include <monitor.h>
>>> +#include <sysemu.h>
>>> +#include <kvm.h>
>>> +
>>> +/* Possible values for action parameter. */
>>> +#define PANICKED_REPORT 1 /* emit QEVENT_GUEST_PANICKED only */
>>> +#define PANICKED_PAUSE 2 /* emit QEVENT_GUEST_PANICKED and pause VM */
>>> +#define PANICKED_POWEROFF 3 /* emit QEVENT_GUEST_PANICKED and quit VM */
>>> +#define PANICKED_RESET 4 /* emit QEVENT_GUEST_PANICKED and reset VM */
>>> +
>>> +#define PV_EVENT_DRIVER "kvm_pv_event"
>>> +
>>> +struct pv_event_action {
>>
>> PVEventAction
>>
>>> + char *panicked_action;
>>> + int panicked_action_value;
>>> +};
>>> +
>>> +#define DEFINE_PV_EVENT_PROPERTIES(_state, _conf) \
>>> + DEFINE_PROP_STRING("panicked_action", _state, _conf.panicked_action)
>>> +
>>> +static void panicked_mon_event(const char *action)
>>> +{
>>> + QObject *data;
>>> +
>>> + data = qobject_from_jsonf("{ 'action': %s }", action);
>>> + monitor_protocol_event(QEVENT_GUEST_PANICKED, data);
>>> + qobject_decref(data);
>>> +}
>>> +
>>> +static void panicked_perform_action(uint32_t panicked_action)
>>> +{
>>> + switch (panicked_action) {
>>> + case PANICKED_REPORT:
>>> + panicked_mon_event("report");
>>> + break;
>>> +
>>> + case PANICKED_PAUSE:
>>> + panicked_mon_event("pause");
>>> + vm_stop(RUN_STATE_GUEST_PANICKED);
>>> + break;
>>> +
>>> + case PANICKED_POWEROFF:
>>> + panicked_mon_event("poweroff");
>>> + qemu_system_shutdown_request();
>>> + break;
>>
>> Misses a line break unlike other cases.
>>
>>> + case PANICKED_RESET:
>>> + panicked_mon_event("reset");
>>> + qemu_system_reset_request();
>>> + break;
>>> + }
>>> +}
>>> +
>>> +static uint64_t supported_event(void)
>>> +{
>>> + return 1 << KVM_PV_FEATURE_PANICKED;
>>> +}
>>> +
>>> +static void handle_event(int event, struct pv_event_action *conf)
>>> +{
>>> + if (event == KVM_PV_EVENT_PANICKED) {
>>> + panicked_perform_action(conf->panicked_action_value);
>>> + }
>>> +}
>>> +
>>> +static int pv_event_init(struct pv_event_action *conf)
>>> +{
>>> + if (!conf->panicked_action) {
>>> + conf->panicked_action_value = PANICKED_REPORT;
>>> + } else if (strcasecmp(conf->panicked_action, "none") == 0) {
>>> + conf->panicked_action_value = PANICKED_REPORT;
>>> + } else if (strcasecmp(conf->panicked_action, "pause") == 0) {
>>> + conf->panicked_action_value = PANICKED_PAUSE;
>>> + } else if (strcasecmp(conf->panicked_action, "poweroff") == 0) {
>>> + conf->panicked_action_value = PANICKED_POWEROFF;
>>> + } else if (strcasecmp(conf->panicked_action, "reset") == 0) {
>>> + conf->panicked_action_value = PANICKED_RESET;
>>> + } else {
>>> + return -1;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +#if defined(KVM_PV_EVENT_PORT)
>>> +
>>> +#include "pv_ioport.c"
>>
>> I'd rather not include any .c files but insert the contents here directly.
>>
>>> +
>>> +#else
>>> +void kvm_pv_event_init(void *opaque)
>>> +{
>>> +}
>>> +#endif
>>> diff --git a/hw/kvm/pv_ioport.c b/hw/kvm/pv_ioport.c
>>> new file mode 100644
>>> index 0000000..c2ed6b5
>>> --- /dev/null
>>> +++ b/hw/kvm/pv_ioport.c
>>> @@ -0,0 +1,93 @@
>>> +/*
>>> + * QEMU KVM support, paravirtual I/O port device
>>> + *
>>> + * Copyright Fujitsu, Corp. 2012
>>> + *
>>> + * Authors:
>>> + * Wen Congyang <wency@cn.fujitsu.com>
>>> + *
>>> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
>>> + * See the COPYING file in the top-level directory.
>>> + *
>>> + */
>>> +
>>> +#include "hw/isa.h"
>>> +
>>> +typedef struct {
>>> + ISADevice dev;
>>> + struct pv_event_action conf;
>>> + MemoryRegion ioport;
>>> +} PVIOPortState;
>>> +
>>> +static uint64_t pv_io_read(void *opaque, target_phys_addr_t addr, unsigned size)
>>> +{
>>> + return supported_event();
>>> +}
>>> +
>>> +static void pv_io_write(void *opaque, target_phys_addr_t addr, uint64_t val,
>>> + unsigned size)
>>> +{
>>> + PVIOPortState *s = opaque;
>>> +
>>> + handle_event(val, &s->conf);
>>> +}
>>> +
>>> +static const MemoryRegionOps pv_io_ops = {
>>> + .read = pv_io_read,
>>> + .write = pv_io_write,
>>> + .impl = {
>>> + .min_access_size = 4,
>>> + .max_access_size = 4,
>>> + },
>>> +};
>>> +
>>> +static int pv_ioport_initfn(ISADevice *dev)
>>> +{
>>> + PVIOPortState *s = DO_UPCAST(PVIOPortState, dev, dev);
>>> +
>>> + if (pv_event_init(&s->conf) < 0)
>>> + return -1;
>>
>> Mandatory braces missing.
>>
>>> +
>>> + memory_region_init_io(&s->ioport, &pv_io_ops, s, "pv_event", 1);
>>> + isa_register_ioport(dev, &s->ioport, KVM_PV_EVENT_PORT);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static Property pv_ioport_properties[] = {
>>> + DEFINE_PV_EVENT_PROPERTIES(PVIOPortState, conf),
>>> + DEFINE_PROP_END_OF_LIST(),
>>> +};
>>> +
>>> +static void pv_ioport_class_init(ObjectClass *klass, void *data)
>>> +{
>>> + DeviceClass *dc = DEVICE_CLASS(klass);
>>> + ISADeviceClass *ic = ISA_DEVICE_CLASS(klass);
>>> +
>>> + ic->init = pv_ioport_initfn;
>>> + dc->no_user = 1;
>>> + dc->props = pv_ioport_properties;
>>> +}
>>> +
>>> +static TypeInfo pv_ioport_info = {
>>> + .name = PV_EVENT_DRIVER,
>>> + .parent = TYPE_ISA_DEVICE,
>>> + .instance_size = sizeof(PVIOPortState),
>>> + .class_init = pv_ioport_class_init,
>>> +};
>>> +
>>> +static void pv_ioport_register_types(void)
>>> +{
>>> + type_register_static(&pv_ioport_info);
>>> +}
>>> +
>>> +type_init(pv_ioport_register_types)
>>> +
>>> +void kvm_pv_event_init(void *opaque)
>>> +{
>>> + ISABus *bus = opaque;
>>> + ISADevice *dev;
>>> +
>>> + dev = isa_create(bus, PV_EVENT_DRIVER);
>>> + qdev_init_nofail(&dev->qdev);
>>> +}
>>> diff --git a/hw/pc_piix.c b/hw/pc_piix.c
>>> index 0c0096f..4af8403 100644
>>> --- a/hw/pc_piix.c
>>> +++ b/hw/pc_piix.c
>>> @@ -46,6 +46,9 @@
>>> #ifdef CONFIG_XEN
>>> # include <xen/hvm/hvm_info_table.h>
>>> #endif
>>> +#ifdef CONFIG_KVM
>>> +# include <asm/kvm_para.h>
>>> +#endif
>>
>> I'd remove this and the #ifdeffery below since a stub function is
>> provided. This is not performance critical.
>
> The stub function is in the file hw/kvm/pv_event.c, and this file
> will be complied only when CONFIG_KVM is y.

Usually the stubs are always provided, compare to for example
kvm-stub.c. Wouldn't that simplify the code?

>
> Thanks
> Wen Congyang
>
>>
>>>
>>> #define MAX_IDE_BUS 2
>>>
>>> @@ -285,6 +288,12 @@ static void pc_init1(MemoryRegion *system_memory,
>>> if (pci_enabled) {
>>> pc_pci_device_init(pci_bus);
>>> }
>>> +
>>> +#ifdef KVM_PV_EVENT_PORT
>>> + if (kvm_enabled()) {
>>> + kvm_pv_event_init(isa_bus);
>>> + }
>>> +#endif
>>> }
>>>
>>> static void pc_init_pci(ram_addr_t ram_size,
>>> diff --git a/kvm.h b/kvm.h
>>> index 2617dd5..598dcbe 100644
>>> --- a/kvm.h
>>> +++ b/kvm.h
>>> @@ -222,4 +222,6 @@ int kvm_irqchip_add_irqfd(KVMState *s, int fd, int virq);
>>> int kvm_irqchip_remove_irqfd(KVMState *s, int fd, int virq);
>>> int kvm_irqchip_add_irq_notifier(KVMState *s, EventNotifier *n, int virq);
>>> int kvm_irqchip_remove_irq_notifier(KVMState *s, EventNotifier *n, int virq);
>>> +
>>> +void kvm_pv_event_init(void *opaque);
>>> #endif
>>> --
>>> 1.7.1
>>>
>>>
>>
>


\
 
 \ /
  Last update: 2012-08-25 10:01    [W:0.105 / U:1.320 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site