lkml.org 
[lkml]   [2012]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFC ebeam PATCH v4 0/2] new USB eBeam input driver
Date
Hi,

New USB input driver for eBeam devices.

Currently supported (tested) :
- Luidia eBeam classic projection and edge projection models
- Nec "interactive solution" NP01Wi1 & NP01Wi2 accessories.

In fact, from basic usb point of view, all these devices are
indistinguishable : they have the same usb ids and (blank) hid
report descriptors. There's other re-branded hardware that need to be
test, but i bet on same ids.

So, the code :

Patch 1 to blacklist the devices for hid generic-usb.

Patch 2 is the actual driver.

Notable stuff :
- use div64_s64 for portable 64/64-bits divisions.
- 13 sysfs custom files : 9 values for the transformation matrix,
4 for xy ranges and a calibration trigger.

The module run fine with a 3.3.6 and a 3.5.0 kernel, both x86_32 and 64.

Thanks for your help.




\
 
 \ /
  Last update: 2012-08-23 00:41    [W:0.080 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site