Messages in this thread | | | Date | Fri, 17 Aug 2012 13:27:53 -0400 | From | Jeff Garzik <> | Subject | Re: [PATCH] pata_atiixp: override cable detection on MSI E350DM-E33 |
| |
On 08/17/2012 04:11 AM, Arnd Hannemann wrote: > The mainboard MSI E350DM-E33 is advertised with 6 SATA ports. > As it turns out, two of them seem to be driven by on-board > SATA<->PATA converters. If a disk drive is connected to one > of them kernel uses UDMA/33 mode due to cable detection: > > [ 34.550823] scsi4 : pata_atiixp > [ 34.555517] scsi5 : pata_atiixp > [ 34.555942] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14 > [ 34.555948] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15 > ... > [ 35.040799] ata5.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133 > [ 35.040806] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32) > [ 35.040817] ata5.00: limited to UDMA/33 due to 40-wire cable > [ 35.049166] ata5.00: configured for UDMA/33 > [ 35.049402] scsi 4:0:0:0: Direct-Access ATA WDC WD20EADS-00R 01.0 PQ: 0 ANSI: 5 > > This patch forces "short cable" mode on this board, as it seems clear that > the on-board SATA<->PATA "cable" is short. > With this patch the disk is configured for UDMA/100: > > [ 5.976756] ata5.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133 > [ 5.996434] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32) > [ 6.024787] ata5.00: configured for UDMA/100 > > Testing revealed no transfer issues. > > Signed-off-by: Arnd Hannemann <arnd@arndnet.de>
applied
| |