lkml.org 
[lkml]   [2012]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 33/35] staging: comedi: cb_pcimdda: use attach_pci callback
Date
Convert this PCI driver to use the comedi PCI auto config attach
mechanism by adding an 'attach_pci' callback function.

This driver does use an external configuration option to determine
the analog output range which is controlled by a jumper on the board.
In order to remove the legacy 'attach' callback, an assumption is made
that the jumper is in the factory setting position for +/-5V outputs.
This does not effect the operation of the board just the range info
that is returned to the user.

A sysfs method will be investigated to allow the user to change the
range.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/comedi/drivers/cb_pcimdda.c | 65 +++++++----------------------
1 file changed, 14 insertions(+), 51 deletions(-)

diff --git a/drivers/staging/comedi/drivers/cb_pcimdda.c b/drivers/staging/comedi/drivers/cb_pcimdda.c
index 350c807..ea96514 100644
--- a/drivers/staging/comedi/drivers/cb_pcimdda.c
+++ b/drivers/staging/comedi/drivers/cb_pcimdda.c
@@ -57,12 +57,7 @@ output modes on the board:
then issue one comedi_data_read() on any channel on the AO subdevice
to initiate the simultaneous XFER.

-Configuration Options:
- [0] PCI bus (optional)
- [1] PCI slot (optional)
- [2] analog output range jumper setting
- 0 == +/- 5 V
- 1 == +/- 10 V
+Configuration Options: not applicable, uses PCI auto config
*/

/*
@@ -157,47 +152,21 @@ static int cb_pcimdda_ao_rinsn(struct comedi_device *dev,
return insn->n;
}

-static struct pci_dev *cb_pcimdda_probe(struct comedi_device *dev,
- struct comedi_devconfig *it)
-{
- struct pci_dev *pcidev = NULL;
-
- for_each_pci_dev(pcidev) {
- if (pcidev->vendor != PCI_VENDOR_ID_COMPUTERBOARDS)
- continue;
- if (pcidev->device != PCI_ID_PCIM_DDA06_16)
- continue;
- if (it->options[0] || it->options[1]) {
- if (pcidev->bus->number != it->options[0] ||
- PCI_SLOT(pcidev->devfn) != it->options[1]) {
- continue;
- }
- }
-
- return pcidev;
- }
- return NULL;
-}
-
-static int cb_pcimdda_attach(struct comedi_device *dev,
- struct comedi_devconfig *it)
+static int cb_pcimdda_attach_pci(struct comedi_device *dev,
+ struct pci_dev *pcidev)
{
struct cb_pcimdda_private *devpriv;
- struct pci_dev *pcidev;
struct comedi_subdevice *s;
int ret;

+ comedi_set_hw_dev(dev, &pcidev->dev);
+ dev->board_name = dev->driver->driver_name;
+
ret = alloc_private(dev, sizeof(*devpriv));
if (ret)
return ret;
devpriv = dev->private;

- pcidev = cb_pcimdda_probe(dev, it);
- if (!pcidev)
- return -EIO;
- comedi_set_hw_dev(dev, &pcidev->dev);
- dev->board_name = dev->driver->driver_name;
-
ret = comedi_pci_enable(pcidev, dev->board_name);
if (ret)
return ret;
@@ -208,19 +177,14 @@ static int cb_pcimdda_attach(struct comedi_device *dev,
return ret;

s = dev->subdevices + 0;
-
/* analog output subdevice */
- s->type = COMEDI_SUBD_AO;
- s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
- s->n_chan = 6;
- s->maxdata = 0xffff;
- /* this is hard-coded here */
- if (it->options[2])
- s->range_table = &range_bipolar10;
- else
- s->range_table = &range_bipolar5;
- s->insn_write = &cb_pcimdda_ao_winsn;
- s->insn_read = &cb_pcimdda_ao_rinsn;
+ s->type = COMEDI_SUBD_AO;
+ s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
+ s->n_chan = 6;
+ s->maxdata = 0xffff;
+ s->range_table = &range_bipolar5;
+ s->insn_write = cb_pcimdda_ao_winsn;
+ s->insn_read = cb_pcimdda_ao_rinsn;

s = dev->subdevices + 1;
/* digital i/o subdevice */
@@ -243,14 +207,13 @@ static void cb_pcimdda_detach(struct comedi_device *dev)
if (pcidev) {
if (dev->iobase)
comedi_pci_disable(pcidev);
- pci_dev_put(pcidev);
}
}

static struct comedi_driver cb_pcimdda_driver = {
.driver_name = "cb_pcimdda",
.module = THIS_MODULE,
- .attach = cb_pcimdda_attach,
+ .attach_pci = cb_pcimdda_attach_pci,
.detach = cb_pcimdda_detach,
};

--
1.7.11


\
 
 \ /
  Last update: 2012-08-17 05:41    [W:0.042 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site