lkml.org 
[lkml]   [2012]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 6/6] ARM: dove: SolidRun CuBox DT
Date
This patch adds basic support for the SolidRun CuBox to DT based
mach-dove. There are still some issues related to ongoing orion/mvebu
development, e.g. gpio-led will not work as there is no DT pinctrl
for dove yet and we don't have board specific setup code. Nevertheless,
the DT description is already introduced here.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: Rabeeh Khoury <rabeeh@solid-run.com>
Cc: Ian Molton <ian.molton@codethink.co.uk>
Cc: Maen Suleiman <maen@marvell.com>
Cc: Olof Johansson <olof@lixom.net>
---
arch/arm/boot/dts/dove-cubox.dts | 42 ++++++++++++++++++++++++++++++++++++++
arch/arm/mach-dove/Makefile.boot | 1 +
2 files changed, 43 insertions(+)
create mode 100644 arch/arm/boot/dts/dove-cubox.dts

diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
new file mode 100644
index 0000000..0adbd5a
--- /dev/null
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -0,0 +1,42 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+ model = "SolidRun CuBox";
+ compatible = "solidrun,cubox", "marvell,dove";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ power {
+ label = "Power";
+ gpios = <&gpio0 18 1>;
+ linux,default-trigger = "default-on";
+ };
+ };
+};
+
+&uart0 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+
+&spi0 {
+ status = "okay";
+
+ /* spi0.0: 4M Flash Winbond W25Q32BV */
+ spi-flash@0 {
+ compatible = "st,w25q32";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
diff --git a/arch/arm/mach-dove/Makefile.boot b/arch/arm/mach-dove/Makefile.boot
index 94ab6b3..cfac9c5 100644
--- a/arch/arm/mach-dove/Makefile.boot
+++ b/arch/arm/mach-dove/Makefile.boot
@@ -4,3 +4,4 @@ initrd_phys-y := 0x00800000

dtb-$(CONFIG_MACH_DOVE_DT) += dove-dove-db.dtb
dtb-$(CONFIG_MACH_DOVE_DT) += dove-cm-a510.dtb
+dtb-$(CONFIG_MACH_DOVE_DT) += dove-cubox.dtb
--
1.7.10.4


\
 
 \ /
  Last update: 2012-08-15 19:43    [W:0.109 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site