lkml.org 
[lkml]   [2012]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [alsa-devel] [PATCH V5 14/18] ALSA: HDA: Make hda sound card usable for Loongson.
At Sat, 11 Aug 2012 17:32:19 +0800,
Huacai Chen wrote:
>
> Lemote A1004(Laptop) and A1205(All-In-One) use Conexant's hda codec,
> this patch modify patch_conexant.c to add Lemote specific code.
>
> Signed-off-by: Jie Chen <chenj@lemote.com>
> Signed-off-by: Huacai Chen <chenhc@lemote.com>
> Signed-off-by: Hongliang Tao <taohl@lemote.com>
> Signed-off-by: Hua Yan <yanh@lemote.com>
> Cc: alsa-devel@alsa-project.org
> ---
> include/linux/pci_ids.h | 2 ++
> sound/pci/hda/patch_conexant.c | 24 ++++++++++++++++++++++++
> 2 files changed, 26 insertions(+), 0 deletions(-)
>
> diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
> index fc35260..b28270e 100644
> --- a/include/linux/pci_ids.h
> +++ b/include/linux/pci_ids.h
> @@ -2918,3 +2918,5 @@
> #define PCI_DEVICE_ID_XEN_PLATFORM 0x0001
>
> #define PCI_VENDOR_ID_OCZ 0x1b85
> +
> +#define PCI_VENDOR_ID_LEMOTE 0x1c06
> diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
> index 1436118..b7de368 100644
> --- a/sound/pci/hda/patch_conexant.c
> +++ b/sound/pci/hda/patch_conexant.c
> @@ -4414,6 +4414,8 @@ static const struct hda_codec_ops cx_auto_patch_ops = {
> enum {
> CXT_PINCFG_LENOVO_X200,
> CXT_PINCFG_LENOVO_TP410,
> + CXT_PINCFG_LEMOTE_A1004,
> + CXT_PINCFG_LEMOTE_A1205,
> CXT_FIXUP_STEREO_DMIC,
> };
>
> @@ -4441,6 +4443,18 @@ static const struct hda_pintbl cxt_pincfg_lenovo_tp410[] = {
> {}
> };
>
> +/* Lemote A1004/A1205 with cxt5066 */
> +static const struct hda_pintbl cxt_pincfg_lemote[] = {
> + { 0x1a, 0x90a10020 }, /* Internal mic */
> + { 0x1b, 0x03a11020 }, /* External mic */
> + { 0x1d, 0x400101f0 }, /* Not used */
> + { 0x1e, 0x40a701f0 }, /* Not used */
> + { 0x20, 0x404501f0 }, /* Not used */
> + { 0x22, 0x404401f0 }, /* Not used */
> + { 0x23, 0x40a701f0 }, /* Not used */
> + {}
> +};
> +
> static const struct hda_fixup cxt_fixups[] = {
> [CXT_PINCFG_LENOVO_X200] = {
> .type = HDA_FIXUP_PINS,
> @@ -4450,6 +4464,14 @@ static const struct hda_fixup cxt_fixups[] = {
> .type = HDA_FIXUP_PINS,
> .v.pins = cxt_pincfg_lenovo_tp410,
> },
> + [CXT_PINCFG_LEMOTE_A1004] = {
> + .type = HDA_FIXUP_PINS,
> + .v.pins = cxt_pincfg_lemote,
> + },
> + [CXT_PINCFG_LEMOTE_A1205] = {
> + .type = HDA_FIXUP_PINS,
> + .v.pins = cxt_pincfg_lemote,
> + },

Well, if both point to the same pin configuration, there is no merit
to create two distinct fixup types.
Just create CXT_PINCFG_LEMOTE_A1X05, then pass it in your both device
entries.


> [CXT_FIXUP_STEREO_DMIC] = {
> .type = HDA_FIXUP_FUNC,
> .v.func = cxt_fixup_stereo_dmic,
> @@ -4467,6 +4489,8 @@ static const struct snd_pci_quirk cxt5066_fixups[] = {
> SND_PCI_QUIRK(0x17aa, 0x215f, "Lenovo T510", CXT_PINCFG_LENOVO_TP410),
> SND_PCI_QUIRK(0x17aa, 0x21ce, "Lenovo T420", CXT_PINCFG_LENOVO_TP410),
> SND_PCI_QUIRK(0x17aa, 0x21cf, "Lenovo T520", CXT_PINCFG_LENOVO_TP410),
> + SND_PCI_QUIRK(PCI_VENDOR_ID_LEMOTE, 0x2011, "Lemote A1004", CXT_PINCFG_LEMOTE_A1004),
> + SND_PCI_QUIRK(PCI_VENDOR_ID_LEMOTE, 0x2012, "Lemote A1205", CXT_PINCFG_LEMOTE_A1205),
> SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC),
> SND_PCI_QUIRK(0x17aa, 0x397b, "Lenovo S205", CXT_FIXUP_STEREO_DMIC),

Don't put entries suddenly in the middle of others.
As you can see, the list is sorted in the order of id numbers.

Also, in this case, we prefer having numbers over PCI_* literals.
It's easier to check through the table in the end.


thanks,

Takashi


\
 
 \ /
  Last update: 2012-08-13 10:43    [W:0.155 / U:1.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site