lkml.org 
[lkml]   [2012]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] [trivial] mfd: Fix typo in mfd
Date
Correct spelling typo in drivers/mfd

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
---
drivers/mfd/ab8500-gpadc.c | 2 +-
drivers/mfd/rc5t583.c | 2 +-
drivers/mfd/rdc321x-southbridge.c | 2 +-
drivers/mfd/tps65911-comparator.c | 2 +-
include/linux/mfd/max8998.h | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index 866f959..29d72a2 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -342,7 +342,7 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)

/*
* Delay might be needed for ABB8500 cut 3.0, if not, remove
- * when hardware will be availible
+ * when hardware will be available
*/
msleep(1);
break;
diff --git a/drivers/mfd/rc5t583.c b/drivers/mfd/rc5t583.c
index cdc1df7..da15101 100644
--- a/drivers/mfd/rc5t583.c
+++ b/drivers/mfd/rc5t583.c
@@ -281,7 +281,7 @@ static int __devinit rc5t583_i2c_probe(struct i2c_client *i2c,

if (i2c->irq) {
ret = rc5t583_irq_init(rc5t583, i2c->irq, pdata->irq_base);
- /* Still continue with waring if irq init fails */
+ /* Still continue with warning, if irq init fails */
if (ret)
dev_warn(&i2c->dev, "IRQ init failed: %d\n", ret);
else
diff --git a/drivers/mfd/rdc321x-southbridge.c b/drivers/mfd/rdc321x-southbridge.c
index 685d61e..7b46d66 100644
--- a/drivers/mfd/rdc321x-southbridge.c
+++ b/drivers/mfd/rdc321x-southbridge.c
@@ -1,5 +1,5 @@
/*
- * RDC321x MFD southbrige driver
+ * RDC321x MFD southbridge driver
*
* Copyright (C) 2007-2010 Florian Fainelli <florian@openwrt.org>
* Copyright (C) 2010 Bernhard Loos <bernhardloos@googlemail.com>
diff --git a/drivers/mfd/tps65911-comparator.c b/drivers/mfd/tps65911-comparator.c
index 5a62e6b..0b6e361 100644
--- a/drivers/mfd/tps65911-comparator.c
+++ b/drivers/mfd/tps65911-comparator.c
@@ -136,7 +136,7 @@ static __devinit int tps65911_comparator_probe(struct platform_device *pdev)

ret = comp_threshold_set(tps65910, COMP2, pdata->vmbch2_threshold);
if (ret < 0) {
- dev_err(&pdev->dev, "cannot set COMP2 theshold\n");
+ dev_err(&pdev->dev, "cannot set COMP2 threshold\n");
return ret;
}

diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h
index f4f0dfa..6823548 100644
--- a/include/linux/mfd/max8998.h
+++ b/include/linux/mfd/max8998.h
@@ -67,7 +67,7 @@ struct max8998_regulator_data {
/**
* struct max8998_board - packages regulator init data
* @regulators: array of defined regulators
- * @num_regulators: number of regultors used
+ * @num_regulators: number of regulators used
* @irq_base: base IRQ number for max8998, required for IRQs
* @ono: power onoff IRQ number for max8998
* @buck_voltage_lock: Do NOT change the values of the following six
--
1.7.12.rc2.9.ge5acacf


\
 
 \ /
  Last update: 2012-08-13 14:43    [W:0.040 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site