lkml.org 
[lkml]   [2012]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH RFT 1/2] regulator: twl: Fix the formula to calculate vsel and voltage for twl6030ldo
From
Date
於 一,2012-07-09 於 11:22 +0800,Axel Lin 提到:
> In twl6030ldo_set_voltage, current code use below formula to calculate vsel:
> vsel = (min_uV/1000 - 1000)/100 + 1;
> This is worng because when min_uV is 1000000 uV, vsel is 1.
> It should be 0 in this case.
> Fix it by change the equation to: (This equation is common for linear mapping)
> vsel = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
>
> In twl6030ldo_get_voltage, current code use below formula to calculate voltage:
> mV = 1000mv + 100mv * (vsel - 1)
> This is worng because when vsel is 0, mV is 900mV. Note the min_uV is 1000mV.
> Fix it by change the equation to: (This equation is common for linear mapping)
> return rdev->desc->min_uV + vsel * rdev->desc->uV_step;

While I'm thinking I need to rework this patch so that it doesn't use
rdev->desc->min_uV and rdev->desc->uV_step and then can be applied
to current Linus' tree.

But while I am tracking back to commit 3e3d3be79c
Author: Rajendra Nayak <rnayak@ti.com>
Date: Thu Apr 22 14:18:32 2010 +0530

twl6030: regulator: Remove vsel tables and use formula for
calculation

All twl6030 regulators can be programmed from 1.0v to 3.3v
with 100mV steps.
The below formula can be used to calculate the vsel values
to be programmed in the VREG_VOLTAGE registers.

Voltage(in mV) = 1000mv + 100mv * (vsel - 1)

Ex: if vsel = 0x9, mV = 1000 + 100 * (9 -1) = 1800mV.

This patch removes all existing VSEL tables for twl6030 adjustable
regulators and just uses the formula directly for vsel calculations
after verifing they fall in the allowed range.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>

I found a problem that before commit 3e3d3be79c, the voltage tables were
not linear mapping. So why we can convert these voltage mapping table to
Voltage(in mV) = 1000mv + 100mv * (vsel - 1)?

Did I miss something?

Regards,
Axel


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2012-07-09 13:41    [W:0.065 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site