lkml.org 
[lkml]   [2012]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] [resend] s3fb: Add Virge/MX (86C260)
On 07/06/2012 01:12 PM, Ondrej Zary wrote:
> Add support for Virge/MX (86C260) chip. Although this is a laptop chip,
> there's an AGP card with this chip too.
>
> Tested with AGP card, will probably not work correctly with laptops.
> DDC does not work on this card (even in DOS or Windows).
>
> Signed-off-by: Ondrej Zary <linux@rainbow-software.org>

Applied.


Thanks,

Florian Tobias Schandinat

>
> --- a/drivers/video/s3fb.c
> +++ b/drivers/video/s3fb.c
> @@ -84,7 +84,7 @@ static const char * const s3_names[] = {"S3 Unknown", "S3 Trio32", "S3 Trio64",
> "S3 Virge/VX", "S3 Virge/DX", "S3 Virge/GX",
> "S3 Virge/GX2", "S3 Virge/GX2+", "",
> "S3 Trio3D/1X", "S3 Trio3D/2X", "S3 Trio3D/2X",
> - "S3 Trio3D"};
> + "S3 Trio3D", "S3 Virge/MX"};
>
> #define CHIP_UNKNOWN 0x00
> #define CHIP_732_TRIO32 0x01
> @@ -105,6 +105,7 @@ static const char * const s3_names[] = {"S3 Unknown", "S3 Trio32", "S3 Trio64",
> #define CHIP_362_TRIO3D_2X 0x11
> #define CHIP_368_TRIO3D_2X 0x12
> #define CHIP_365_TRIO3D 0x13
> +#define CHIP_260_VIRGE_MX 0x14
>
> #define CHIP_XXX_TRIO 0x80
> #define CHIP_XXX_TRIO64V2_DXGX 0x81
> @@ -280,7 +281,8 @@ static int __devinit s3fb_setup_ddc_bus(struct fb_info *info)
> */
> /* vga_wseq(par->state.vgabase, 0x08, 0x06); - not needed, already unlocked */
> if (par->chip == CHIP_357_VIRGE_GX2 ||
> - par->chip == CHIP_359_VIRGE_GX2P)
> + par->chip == CHIP_359_VIRGE_GX2P ||
> + par->chip == CHIP_260_VIRGE_MX)
> svga_wseq_mask(par->state.vgabase, 0x0d, 0x01, 0x03);
> else
> svga_wseq_mask(par->state.vgabase, 0x0d, 0x00, 0x03);
> @@ -487,7 +489,8 @@ static void s3_set_pixclock(struct fb_info *info, u32 pixclock)
> par->chip == CHIP_359_VIRGE_GX2P ||
> par->chip == CHIP_360_TRIO3D_1X ||
> par->chip == CHIP_362_TRIO3D_2X ||
> - par->chip == CHIP_368_TRIO3D_2X) {
> + par->chip == CHIP_368_TRIO3D_2X ||
> + par->chip == CHIP_260_VIRGE_MX) {
> vga_wseq(par->state.vgabase, 0x12, (n - 2) | ((r & 3) << 6)); /* n and two bits of r */
> vga_wseq(par->state.vgabase, 0x29, r >> 2); /* remaining highest bit of r */
> } else
> @@ -690,7 +693,8 @@ static int s3fb_set_par(struct fb_info *info)
> par->chip != CHIP_359_VIRGE_GX2P &&
> par->chip != CHIP_360_TRIO3D_1X &&
> par->chip != CHIP_362_TRIO3D_2X &&
> - par->chip != CHIP_368_TRIO3D_2X) {
> + par->chip != CHIP_368_TRIO3D_2X &&
> + par->chip != CHIP_260_VIRGE_MX) {
> vga_wcrt(par->state.vgabase, 0x54, 0x18); /* M parameter */
> vga_wcrt(par->state.vgabase, 0x60, 0xff); /* N parameter */
> vga_wcrt(par->state.vgabase, 0x61, 0xff); /* L parameter */
> @@ -739,7 +743,8 @@ static int s3fb_set_par(struct fb_info *info)
> par->chip == CHIP_368_TRIO3D_2X ||
> par->chip == CHIP_365_TRIO3D ||
> par->chip == CHIP_375_VIRGE_DX ||
> - par->chip == CHIP_385_VIRGE_GX) {
> + par->chip == CHIP_385_VIRGE_GX ||
> + par->chip == CHIP_260_VIRGE_MX) {
> dbytes = info->var.xres * ((bpp+7)/8);
> vga_wcrt(par->state.vgabase, 0x91, (dbytes + 7) / 8);
> vga_wcrt(par->state.vgabase, 0x90, (((dbytes + 7) / 8) >> 8) | 0x80);
> @@ -751,7 +756,8 @@ static int s3fb_set_par(struct fb_info *info)
> par->chip == CHIP_359_VIRGE_GX2P ||
> par->chip == CHIP_360_TRIO3D_1X ||
> par->chip == CHIP_362_TRIO3D_2X ||
> - par->chip == CHIP_368_TRIO3D_2X)
> + par->chip == CHIP_368_TRIO3D_2X ||
> + par->chip == CHIP_260_VIRGE_MX)
> vga_wcrt(par->state.vgabase, 0x34, 0x00);
> else /* enable Data Transfer Position Control (DTPC) */
> vga_wcrt(par->state.vgabase, 0x34, 0x10);
> @@ -807,7 +813,8 @@ static int s3fb_set_par(struct fb_info *info)
> par->chip == CHIP_359_VIRGE_GX2P ||
> par->chip == CHIP_360_TRIO3D_1X ||
> par->chip == CHIP_362_TRIO3D_2X ||
> - par->chip == CHIP_368_TRIO3D_2X)
> + par->chip == CHIP_368_TRIO3D_2X ||
> + par->chip == CHIP_260_VIRGE_MX)
> svga_wcrt_mask(par->state.vgabase, 0x67, 0x00, 0xF0);
> else {
> svga_wcrt_mask(par->state.vgabase, 0x67, 0x10, 0xF0);
> @@ -837,7 +844,8 @@ static int s3fb_set_par(struct fb_info *info)
> par->chip != CHIP_359_VIRGE_GX2P &&
> par->chip != CHIP_360_TRIO3D_1X &&
> par->chip != CHIP_362_TRIO3D_2X &&
> - par->chip != CHIP_368_TRIO3D_2X)
> + par->chip != CHIP_368_TRIO3D_2X &&
> + par->chip != CHIP_260_VIRGE_MX)
> hmul = 2;
> }
> break;
> @@ -864,7 +872,8 @@ static int s3fb_set_par(struct fb_info *info)
> par->chip != CHIP_359_VIRGE_GX2P &&
> par->chip != CHIP_360_TRIO3D_1X &&
> par->chip != CHIP_362_TRIO3D_2X &&
> - par->chip != CHIP_368_TRIO3D_2X)
> + par->chip != CHIP_368_TRIO3D_2X &&
> + par->chip != CHIP_260_VIRGE_MX)
> hmul = 2;
> }
> break;
> @@ -1208,7 +1217,8 @@ static int __devinit s3_pci_probe(struct pci_dev *dev, const struct pci_device_i
> break;
> }
> } else if (par->chip == CHIP_357_VIRGE_GX2 ||
> - par->chip == CHIP_359_VIRGE_GX2P) {
> + par->chip == CHIP_359_VIRGE_GX2P ||
> + par->chip == CHIP_260_VIRGE_MX) {
> switch ((regval & 0xC0) >> 6) {
> case 1: /* 4MB */
> info->screen_size = 4 << 20;
> @@ -1515,6 +1525,7 @@ static struct pci_device_id s3_devices[] __devinitdata = {
> {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A12), .driver_data = CHIP_359_VIRGE_GX2P},
> {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A13), .driver_data = CHIP_36X_TRIO3D_1X_2X},
> {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8904), .driver_data = CHIP_365_TRIO3D},
> + {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8C01), .driver_data = CHIP_260_VIRGE_MX},
>
> {0, 0, 0, 0, 0, 0, 0}
> };
>



\
 
 \ /
  Last update: 2012-07-09 00:41    [W:0.047 / U:0.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site