lkml.org 
[lkml]   [2012]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] PCI / PM: Restore the original behavior of pci_set_power_state()
Date
On Thursday, July 05, 2012, Bjorn Helgaas wrote:
> On Thu, Jun 28, 2012 at 4:01 AM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> > From: Rafael J. Wysocki <rjw@sisk.pl>
> >
> > Commit cc2893b6 (PCI: Ensure we re-enable devices on resume)
> > addressed the problem with USB not being powered after resume on
> > recent Lenovo machines, but it did that in a suboptimal way.
> > Namely, it should have changed the relevant code paths only,
> > which are pci_pm_resume_noirq() and pci_pm_restore_noirq() supposed
> > to restore the device's power and standard configuration registers
> > after system resume from suspend or hibernation. Instead, however,
> > it modified pci_set_power_state() which is executed in several
> > other situations too. That resulted in some undesirable effects,
> > like attempting to change a device's power state in the same way
> > multiple times in a row (up to as many as 4 times in a row in the
> > snd_hda_intel driver).
> >
> > Fix the bug addressed by commit cc2893b6 in an alternative way,
> > by forcibly powering up all devices in pci_pm_default_resume_early(),
> > which is called by pci_pm_resume_noirq() and pci_pm_restore_noirq()
> > to restore the device's power and standard configuration registers,
> > and modifying pci_pm_runtime_resume() to avoid the forcible power-up
> > if not necessary. Then, revert the changes made by commit cc2893b6
> > to make the confusion introduced by it go away.
> >
> > Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
> > ---
> > drivers/pci/pci-driver.c | 14 ++++++++------
> > drivers/pci/pci.c | 19 ++++++++++++++++++-
> > drivers/pci/pci.h | 1 +
> > 3 files changed, 27 insertions(+), 7 deletions(-)
> >
> > Index: linux/drivers/pci/pci.c
> > ===================================================================
> > --- linux.orig/drivers/pci/pci.c
> > +++ linux/drivers/pci/pci.c
> > @@ -662,6 +662,19 @@ void pci_update_current_state(struct pci
> > }
> >
> > /**
> > + * pci_power_up - Put the given device into D0 forcibly
> > + * @dev: PCI device to power up
> > + */
> > +void pci_power_up(struct pci_dev *dev)
> > +{
> > + if (platform_pci_power_manageable(dev))
> > + platform_pci_set_power_state(dev, PCI_D0);
> > +
> > + pci_raw_set_power_state(dev, PCI_D0);
> > + pci_update_current_state(dev, PCI_D0);
> > +}
> > +
> > +/**
> > * pci_platform_power_transition - Use platform to change device power state
> > * @dev: PCI device to handle.
> > * @state: State to put the device into.
> > @@ -707,7 +720,7 @@ static void __pci_start_power_transition
> > */
> > int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state)
> > {
> > - return state >= PCI_D0 ?
> > + return state > PCI_D0 ?
> > pci_platform_power_transition(dev, state) : -EINVAL;
>
> This hunk conflicted with Huang's D3_COLD patches. I fixed it up; can
> you check and make sure I did it correctly?
>
> I pushed the resolution to here:
> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git on the
> pci/rafael-pci_set_power_state-rebase branch.

Yes, it looks good. The point is to make __pci_complete_power_transition()
return the error code for PCI_DO too.

Thanks,
Rafael


\
 
 \ /
  Last update: 2012-07-06 00:21    [W:0.059 / U:39.872 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site