lkml.org 
[lkml]   [2012]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2] regulator: fixed: dt: support for input supply
Date
Add support for input supply in DT parsing of node.
The input supply will be provided by the property
"vin-supply" in the regulator node.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
Changes from V1:
Based on discussion on patch
[PATCH 2/2] regulator: fixed: dt: support for input supply
that the supply name should be passed through desc->supply_name
in both DT and non-DT case.
Making the change to have this.

.../bindings/regulator/fixed-regulator.txt | 2 ++
drivers/regulator/fixed.c | 15 +++++++++++++--
2 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
index 2f5b6b1..4fae41d 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
@@ -10,6 +10,7 @@ Optional properties:
If this property is missing, the default assumed is Active low.
- gpio-open-drain: GPIO is open drain type.
If this property is missing then default assumption is false.
+-vin-supply: Input supply name.

Any property defined as part of the core regulator
binding, defined in regulator.txt, can also be used.
@@ -29,4 +30,5 @@ Example:
enable-active-high;
regulator-boot-on;
gpio-open-drain;
+ vin-supply = <&parent_reg>;
};
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index b8c3a91..f56e575 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -45,13 +45,14 @@ struct fixed_voltage_data {
/**
* of_get_fixed_voltage_config - extract fixed_voltage_config structure info
* @dev: device requesting for fixed_voltage_config
+ * @vin_supply: pointer to store whether input supply is available or not.
*
* Populates fixed_voltage_config structure by extracting data from device
* tree node, returns a pointer to the populated structure of NULL if memory
* alloc fails.
*/
static struct fixed_voltage_config *
-of_get_fixed_voltage_config(struct device *dev)
+of_get_fixed_voltage_config(struct device *dev, bool *vin_supply)
{
struct fixed_voltage_config *config;
struct device_node *np = dev->of_node;
@@ -106,6 +107,9 @@ of_get_fixed_voltage_config(struct device *dev)
if (of_find_property(np, "gpio-open-drain", NULL))
config->gpio_is_open_drain = true;

+ if (of_find_property(np, "vin-supply", NULL))
+ *vin_supply = true;
+
return config;
}

@@ -184,13 +188,18 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
struct fixed_voltage_data *drvdata;
struct regulator_config cfg = { };
int ret;
+ const char *supply_reg = NULL;

if (pdev->dev.of_node) {
- config = of_get_fixed_voltage_config(&pdev->dev);
+ bool vin_supply = false;
+ config = of_get_fixed_voltage_config(&pdev->dev, &vin_supply);
if (IS_ERR(config))
return PTR_ERR(config);
+ if (vin_supply)
+ supply_reg = "vin";
} else {
config = pdev->dev.platform_data;
+ supply_reg = config->init_data->supply_regulator;
}

if (!config)
@@ -213,6 +222,8 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
drvdata->desc.type = REGULATOR_VOLTAGE;
drvdata->desc.owner = THIS_MODULE;

+ drvdata->desc.supply_name = supply_reg;
+
if (config->microvolts)
drvdata->desc.n_voltages = 1;

--
1.7.1.1


\
 
 \ /
  Last update: 2012-07-04 18:01    [W:0.433 / U:0.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site