lkml.org 
[lkml]   [2012]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/5] ARM: tegra: set up wlan clocks for tegra dt
From
Date
On Wed, 2012-07-04 at 18:43 +0800, Marc Dietrich wrote:
> Am Mittwoch, 4. Juli 2012, 17:34:44 schrieb Wei Ni:
> > Set up the wlan clock tree for Tegra20 and Tegra30.
> >
> > Signed-off-by: Wei Ni <wni@nvidia.com>
> > ---
> > arch/arm/mach-tegra/board-dt-tegra20.c | 1 +
> > arch/arm/mach-tegra/board-dt-tegra30.c | 1 +
> > 2 files changed, 2 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c
> > b/arch/arm/mach-tegra/board-dt-tegra20.c index 70a19a9..fbcc7d9 100644
> > --- a/arch/arm/mach-tegra/board-dt-tegra20.c
> > +++ b/arch/arm/mach-tegra/board-dt-tegra20.c
> > @@ -78,6 +78,7 @@ static __initdata struct tegra_clk_init_table
> > tegra_dt_clk_init_table[] = { { "pll_a", "pll_p_out1", 56448000,
> > true },
> > { "pll_a_out0", "pll_a", 11289600, true },
> > { "cdev1", NULL, 0, true },
> > + { "blink", "clk_32k", 32768, true },
>
> what's the reason to enable this on all boards? Would it make sense to set
> this to "false" instead?

This clock is used for the wlan device, it need to be enabled, so that
the wlan device can be powered on, and then the mmc driver can enumerate
it.

>
> Marc
>
>
> > { "i2s1", "pll_a_out0", 11289600, false},
> > { "i2s2", "pll_a_out0", 11289600, false},
> > { NULL, NULL, 0, 0},
> > diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c
> > b/arch/arm/mach-tegra/board-dt-tegra30.c index 53bf60f..2d73c61 100644
> > --- a/arch/arm/mach-tegra/board-dt-tegra30.c
> > +++ b/arch/arm/mach-tegra/board-dt-tegra30.c
> > @@ -61,6 +61,7 @@ static __initdata struct tegra_clk_init_table
> > tegra_dt_clk_init_table[] = { { "pll_a_out0", "pll_a", 11289600, true },
> > { "extern1", "pll_a_out0", 0, true },
> > { "clk_out_1", "extern1", 0, true },
> > + { "blink", "clk_32k", 32768, true },
> > { "i2s0", "pll_a_out0", 11289600, false},
> > { "i2s1", "pll_a_out0", 11289600, false},
> > { "i2s2", "pll_a_out0", 11289600, false},




\
 
 \ /
  Last update: 2012-07-04 14:01    [W:0.415 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site