lkml.org 
[lkml]   [2012]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] onewire: w1-gpio: add ext_pullup_enable pin in platform data
Ping.

On 25.07.2012 22:54, Daniel Mack wrote:
> In the process of porting boards to devicetree implemenation, we should
> keep information about external circuitry where they belong - the
> individual drivers.
>
> This patch adds a way to specify a GPIO to drive the (optional) external
> pull-up logic, rather than using a function pointer for that.
>
> Signed-off-by: Daniel Mack <zonque@gmail.com>
> Cc: Evgeniy Polyakov <zbr@ioremap.net>
> Cc: Ville Syrjala <syrjala@sci.fi>
> ---
> drivers/w1/masters/w1-gpio.c | 18 +++++++++++++++++-
> include/linux/w1-gpio.h | 1 +
> 2 files changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
> index df600d1..dac88ff 100644
> --- a/drivers/w1/masters/w1-gpio.c
> +++ b/drivers/w1/masters/w1-gpio.c
> @@ -59,6 +59,13 @@ static int __init w1_gpio_probe(struct platform_device *pdev)
> if (err)
> goto free_master;
>
> + if (gpio_is_valid(pdata->ext_pullup_enable_pin)) {
> + err = gpio_request_one(pdata->ext_pullup_enable_pin,
> + GPIOF_INIT_LOW, "w1 pullup");
> + if (err < 0)
> + goto free_gpio;
> + }
> +
> master->data = pdata;
> master->read_bit = w1_gpio_read_bit;
>
> @@ -72,15 +79,21 @@ static int __init w1_gpio_probe(struct platform_device *pdev)
>
> err = w1_add_master_device(master);
> if (err)
> - goto free_gpio;
> + goto free_gpio_ext_pu;
>
> if (pdata->enable_external_pullup)
> pdata->enable_external_pullup(1);
>
> + if (gpio_is_valid(pdata->ext_pullup_enable_pin))
> + gpio_set_value(pdata->ext_pullup_enable_pin, 1);
> +
> platform_set_drvdata(pdev, master);
>
> return 0;
>
> + free_gpio_ext_pu:
> + if (gpio_is_valid(pdata->ext_pullup_enable_pin))
> + gpio_free(pdata->ext_pullup_enable_pin);
> free_gpio:
> gpio_free(pdata->pin);
> free_master:
> @@ -97,6 +110,9 @@ static int __exit w1_gpio_remove(struct platform_device *pdev)
> if (pdata->enable_external_pullup)
> pdata->enable_external_pullup(0);
>
> + if (gpio_is_valid(pdata->ext_pullup_enable_pin))
> + gpio_set_value(pdata->ext_pullup_enable_pin, 0);
> +
> w1_remove_master_device(master);
> gpio_free(pdata->pin);
> kfree(master);
> diff --git a/include/linux/w1-gpio.h b/include/linux/w1-gpio.h
> index 3adeff8..065e3ae 100644
> --- a/include/linux/w1-gpio.h
> +++ b/include/linux/w1-gpio.h
> @@ -19,6 +19,7 @@ struct w1_gpio_platform_data {
> unsigned int pin;
> unsigned int is_open_drain:1;
> void (*enable_external_pullup)(int enable);
> + unsigned int ext_pullup_enable_pin;
> };
>
> #endif /* _LINUX_W1_GPIO_H */
>



\
 
 \ /
  Last update: 2012-07-30 20:01    [W:0.142 / U:0.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site