lkml.org 
[lkml]   [2012]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3 3/4] [SCSI] ufs: Add Platform glue driver for ufshcd
Date
This patch adds Platform glue driver for ufshcd.

Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Vinayak Holikatti <vinholikatti@gmail.com>
Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com>
---
drivers/scsi/ufs/Kconfig | 11 ++
drivers/scsi/ufs/Makefile | 1 +
drivers/scsi/ufs/ufshcd-pltfrm.c | 222 ++++++++++++++++++++++++++++++++++++++
3 files changed, 234 insertions(+)
create mode 100644 drivers/scsi/ufs/ufshcd-pltfrm.c

diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 265a8c8..8c06330 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -67,3 +67,14 @@ config SCSI_UFSHCD_PCI
If you have a controller with this interface, say Y or M here.

If unsure, say N.
+
+config SCSI_UFSHCD_PLATFORM
+ tristate "Platform based UFS Controller support"
+ depends on SCSI_UFSHCD
+ ---help---
+ This selects the UFS host controller support. If you have a
+ platform with UFS controller, say Y or M here.
+
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index 9eda0df..1e5bd48 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -1,3 +1,4 @@
# UFSHCD makefile
obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
+obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
new file mode 100644
index 0000000..68e1675
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -0,0 +1,222 @@
+/*
+ * Universal Flash Storage Host controller driver
+ *
+ * This code is based on drivers/scsi/ufs/ufshcd-pltfm.c
+ * Copyright (C) 2011-2012 Samsung India Software Operations
+ *
+ * Santosh Yaraganavi <santosh.sy@samsung.com>
+ * Vinayak Holikatti <h.vinayak@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+ * USA.
+ */
+
+#include "ufshcd.h"
+#include "ufshcd_common.h"
+#include <linux/platform_device.h>
+
+#ifdef CONFIG_PM
+/**
+ * ufshcd_pltfrm_suspend - suspend power management function
+ * @pdev: pointer to Platform device handle
+ * @mesg: power state
+ *
+ * Returns -ENOSYS
+ */
+static int ufshcd_pltfrm_suspend(struct platform_device *pdev,
+ pm_message_t mesg)
+{
+ /*
+ * TODO:
+ * 1. Block SCSI requests from SCSI midlayer
+ * 2. Change the internal driver state to non operational
+ * 3. Set UTRLRSR and UTMRLRSR bits to zero
+ * 4. Wait until outstanding commands are completed
+ * 5. Set HCE to zero to send the UFS host controller to reset state
+ */
+
+ return -ENOSYS;
+}
+
+/**
+ * ufshcd_pltfrm_resume - resume power management function
+ * @pdev: pointer to Platform device handle
+ *
+ * Returns -ENOSYS
+ */
+static int ufshcd_pltfrm_resume(struct platform_device *pdev)
+{
+ /*
+ * TODO:
+ * 1. Set HCE to 1, to start the UFS host controller
+ * initialization process
+ * 2. Set UTRLRSR and UTMRLRSR bits to 1
+ * 3. Change the internal driver state to operational
+ * 4. Unblock SCSI requests from SCSI midlayer
+ */
+
+ return -ENOSYS;
+}
+#endif
+
+/**
+ * ufshcd_pltfrm_probe - probe routine of the driver
+ * @pdev: pointer to Platform device handle
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int __devinit
+ufshcd_pltfrm_probe(struct platform_device *pdev)
+{
+ struct ufs_hba *hba;
+ void __iomem *mmio_base;
+ struct resource *mem_res;
+ struct resource *irq_res;
+ resource_size_t mem_size;
+ int err;
+ struct device *dev = &pdev->dev;
+
+ mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem_res) {
+ dev_err(&pdev->dev,
+ "%s: Memory resource not available\n", __FILE__);
+ err = -ENODEV;
+ goto out_error;
+ }
+
+ mem_size = resource_size(mem_res);
+ if (!request_mem_region(mem_res->start, mem_size, "ufshcd")) {
+ dev_err(&pdev->dev,
+ "ufshcd: Cannot reserve the memory resource\n");
+ err = -EBUSY;
+ goto out_error;
+ }
+
+ mmio_base = ioremap_nocache(mem_res->start, mem_size);
+ if (!mmio_base) {
+ dev_err(&pdev->dev, "memory map failed\n");
+ err = -ENOMEM;
+ goto out_release_regions;
+ }
+
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!irq_res) {
+ dev_err(&pdev->dev, "ufshcd: IRQ resource not available\n");
+ err = -ENODEV;
+ goto out_iounmap;
+ }
+
+ err = dma_set_coherent_mask(dev, dev->coherent_dma_mask);
+ if (err) {
+ dev_err(&pdev->dev, "set dma mask failed\n");
+ goto out_iounmap;
+ }
+
+ err = ufshcd_init(&pdev->dev, &hba, mmio_base, irq_res->start);
+ if (err) {
+ dev_err(&pdev->dev, "%s: Intialization failed\n",
+ __FILE__);
+ goto out_iounmap;
+ }
+
+ platform_set_drvdata(pdev, hba);
+
+ return 0;
+
+out_iounmap:
+ iounmap(mmio_base);
+out_release_regions:
+ release_mem_region(mem_res->start, mem_size);
+out_error:
+ return err;
+}
+
+/**
+ * ufshcd_pltfrm_remove - remove platform driver routine
+ * @pdev: pointer to platform device handle
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int __devexit ufshcd_pltfrm_remove(struct platform_device *pdev)
+{
+ struct resource *mem_res;
+ struct resource *irq_res;
+ resource_size_t mem_size;
+ struct ufs_hba *hba = platform_get_drvdata(pdev);
+
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+ if (!irq_res)
+ dev_err(&pdev->dev, "ufshcd: IRQ resource not available\n");
+ else
+ free_irq(irq_res->start, hba);
+
+ ufshcd_remove(hba);
+ mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem_res)
+ dev_err(&pdev->dev, "ufshcd: Memory resource not available\n");
+ else {
+ mem_size = resource_size(mem_res);
+ release_mem_region(mem_res->start, mem_size);
+ }
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+static const struct of_device_id ufs_of_match[] = {
+ { .compatible = "jedec,ufs-1.1"},
+};
+
+static struct platform_driver ufshcd_pltfrm_driver = {
+ .probe = ufshcd_pltfrm_probe,
+ .remove = __devexit_p(ufshcd_pltfrm_remove),
+#ifdef CONFIG_PM
+ .suspend = ufshcd_pltfrm_suspend,
+ .resume = ufshcd_pltfrm_resume,
+#endif
+ .driver = {
+ .name = "ufshcd",
+ .owner = THIS_MODULE,
+ .of_match_table = ufs_of_match,
+ },
+};
+
+module_platform_driver(ufshcd_pltfrm_driver);
+
+MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>");
+MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>");
+MODULE_DESCRIPTION("Platform based UFS host controller driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(UFSHCD_DRIVER_VERSION);
--
1.7.9.5


\
 
 \ /
  Last update: 2012-07-26 11:21    [W:0.096 / U:1.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site