lkml.org 
[lkml]   [2012]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RESEND PATCH 1/1] clk: add DT support for clock gating control
On 07/12/2012 02:15 AM, Sebastian Hesselbarth wrote:
> As Rob's clock binding support patch is now up on clk-next, I'd like to
> draw attention on this patch again.
> --
> This patch adds support for using clock gates (clk-gate) from DT based
> on Rob Herrings DT clk binding support for 3.6.
>
> It adds a helper function to clk-gate to allocate all resources required by
> a set of individual clock gates, i.e. register base address and lock. Each
> clock gate is described as a child of the clock-gating-control in DT and
> also created by the helper function.
>
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Rob Landley <rob@landley.net>
> Cc: Mike Turquette <mturquette@ti.com>
> Cc: devicetree-discuss@lists.ozlabs.org
> Cc: linux-doc@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> ---
> .../bindings/clock/clock-gating-control.txt | 80
> +++++++++++++++++++
> drivers/clk/clk-gate.c | 84
> ++++++++++++++++++++
> include/linux/clk-provider.h | 2 +
> 3 files changed, 166 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/clock/clock-gating-control.txt
>
> diff --git
> a/Documentation/devicetree/bindings/clock/clock-gating-control.txt
> b/Documentation/devicetree/bindings/clock/clock-gating-control.txt
> new file mode 100644
> index 0000000..05f5728
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/clock-gating-control.txt
> @@ -0,0 +1,80 @@
> +Binding for simple clock gating control based on clock gate register
> with one
> +bit per clock gate. This is a clock consumer and also a clock provider
> for a
> +set of gated clocks that are described as children of this node. Each
> clock gate
> +is described by a bit number and polarity to control the gate.
> +
> +This binding uses the common clock binding[1].
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +==Clock gating control==
> +
> +Required properties:
> +- compatible : shall be "clock-gating-control".
> +- reg : should contain the register physical address and length for
> + the clock gating control.
> +- clocks : shared parent clock for all gated clocks.
> +- #clock-cells : from common clock binding; shall be set to 0.
> +- #address-cells : number of cells required to describe a clock gate;
> + should be <2>.
> +- #size-cells : should be zero.
> +
> +Each individual clock gate bit is described as a child of the
> +corresponding gating control register with the following properties.
> +
> +Required child properties:
> +- reg : should contain the individual bit and polarity to control
> + the clock gate. A polarity of 0 means that by setting the
> + bit to 1 the clock passes through the clock gate while
> + setting the bit to 0 disables the clock. Any other value
> + for polarity inverts the meaning of the control bit.

This is a bit of overloading reg to specify the polarity.

> +
> +Optional child properties:
> +- clocks : overrides the shared parent clock for this clock gate
> + by the clock passed in this property.
> +- clock-output-names : from common clock binding; allows to set
> + a specific name for the gated clock output.
> +
> +==Example==
> +
> + /* fixed root clock */
> + osc: oscillator {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <166666667>;
> + };
> +
> + /* sata peripheral clock */
> + sata_clk: ext-oscillator {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <25000000>;
> + };
> +
> + /* register-based clock gating control */
> + gating-control@f10d0038 {
> + compatible = "clock-gating-control";
> + reg = <0xf10d0038 0x4>;
> + clocks = <&osc>;
> + #clock-cells = <0>;
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + /* USB0 clock gate on register bit 0 with inverted polarity */
> + cg_usb0: clockgate@0 {
> + reg = <0 1>; /* register bit 0, inverted polarity */
> + };
> +
> + /* PCIe0 clock gate on register bit 1 with normal polarity
> + * and named output clock */
> + cg_pcie0: clockgate@1 {
> + reg = <1 0>; /* register bit 1, normal polarity */
> + clock-output-names = "pcie0_clk";
> + };
> +
> + /* SATA clock gate with different parent clock */
> + cg_sata: clockgate@3 {
> + reg = <3 0>; /* register bit 3, normal polarity */
> + clocks = <&sata_clk>;
> + };

I'm not sure I like the node per bit. What about a bit mask for valid
bits and polarities. Then add a clock cell to specify the bit or index.

i.MX has 2-bit enable fields for its leaf clocks, so how and if you
would support that is something to think about.

Rob

> + };
> diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
> index 578465e..1e88907 100644
> --- a/drivers/clk/clk-gate.c
> +++ b/drivers/clk/clk-gate.c
> @@ -15,6 +15,9 @@
> #include <linux/io.h>
> #include <linux/err.h>
> #include <linux/string.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> /**
> * DOC: basic gatable clock which can gate and ungate it's ouput
> @@ -148,3 +151,84 @@ struct clk *clk_register_gate(struct device *dev,
> const char *name,
> return clk;
> }
> +
> +#ifdef CONFIG_OF
> +/**
> + * of_clock_gating_control_setup() - Setup function for clock gate control
> + * This is a helper for using clk-gate from OF device tree. It allocates
> + * a common lock for a base register and creates the individual
> clk-gates.
> + */
> +void __init of_clock_gating_control_setup(struct device_node *np)
> +{
> + struct device_node *child;
> + const char *pclk_name;
> + void __iomem *base;
> + spinlock_t *lockp;
> + unsigned int rnum;
> + u64 addr;
> +
> + pclk_name = of_clk_get_parent_name(np, 0);
> + if (!pclk_name) {
> + pr_debug("%s: unable to get parent clock for %s\n",
> + __func__, np->full_name);
> + return;
> + }
> +
> + lockp = kzalloc(sizeof(spinlock_t), GFP_KERNEL);
> + if (!lockp) {
> + pr_debug("%s: unable to allocate spinlock for %s\n",
> + __func__, np->full_name);
> + return;
> + }
> +
> + spin_lock_init(lockp);
> + base = of_iomap(np, 0);
> + rnum = sizeof(resource_size_t) * 8;
> + addr = of_translate_address(np, of_get_property(np, "reg", NULL));
> +
> + pr_debug("create clock gate control %s\n", np->full_name);
> +
> + for_each_child_of_node(np, child) {
> + struct clk *cg;
> + const char *cg_name;
> + const char *cg_pclk_name;
> + u32 propval[2];
> + unsigned int rbit;
> +
> + if (of_property_read_u32_array(child, "reg", propval, 2)) {
> + pr_debug("%s: wrong #reg on %s\n",
> + __func__, child->full_name);
> + continue;
> + }
> +
> + rbit = propval[0];
> + if (rbit >= rnum) {
> + pr_debug("%s: bit position of %s exceeds resources\n",
> + __func__, child->full_name);
> + continue;
> + }
> +
> + cg_pclk_name = of_clk_get_parent_name(child, 0);
> + if (!pclk_name)
> + cg_pclk_name = pclk_name;
> +
> + if (of_property_read_string(child, "clock-output-names",
> + &cg_name)) {
> + unsigned int nlen = 4 + 16 + strlen(child->name);
> + char *name = kzalloc(nlen+1, GFP_KERNEL);
> + if (!name)
> + continue;
> + snprintf(name, nlen, "%u@%llx.%s", rbit,
> + (unsigned long long)addr, child->name);
> + cg_name = name;
> + }
> +
> + pr_debug(" create clock gate: %s\n", cg_name);
> +
> + cg = clk_register_gate(NULL, cg_name, cg_pclk_name, 0,
> + base, rbit, propval[1], lockp);
> + if (cg)
> + of_clk_add_provider(child, of_clk_src_simple_get, cg);
> + }
> +}
> +#endif
> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> index b97f61e..499eac2 100644
> --- a/include/linux/clk-provider.h
> +++ b/include/linux/clk-provider.h
> @@ -205,6 +205,8 @@ struct clk *clk_register_gate(struct device *dev,
> const char *name,
> void __iomem *reg, u8 bit_idx,
> u8 clk_gate_flags, spinlock_t *lock);
> +void of_clock_gating_control_setup(struct device_node *np);
> +
> /**
> * struct clk_divider - adjustable divider clock
> *



\
 
 \ /
  Last update: 2012-07-12 14:41    [W:0.079 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site