lkml.org 
[lkml]   [2012]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH RFC] [media] adv7180.c: convert to v4l2 control framework
Date
On Wed 11 July 2012 15:36:25 Federico Vaga wrote:
> Hi Hans,
>
> Thank you for your review
>
> > > +static int adv7180_init_controls(struct adv7180_state *state)
> > > +{
> > > + v4l2_ctrl_handler_init(&state->ctrl_hdl, 2);
> >
> > 2 -> 4, since there are 4 controls. It's a hint only, but it helps
> > optimizing the internal hash data structure.
>
> Sure :)
>
> > >
> > > @@ -445,9 +402,9 @@ static const struct v4l2_subdev_video_ops
> > > adv7180_video_ops = {>
> > > static const struct v4l2_subdev_core_ops adv7180_core_ops = {
> > >
> > > .g_chip_ident = adv7180_g_chip_ident,
> > > .s_std = adv7180_s_std,
> > >
> > > - .queryctrl = adv7180_queryctrl,
> > > - .g_ctrl = adv7180_g_ctrl,
> > > - .s_ctrl = adv7180_s_ctrl,
> > > + .queryctrl = v4l2_subdev_queryctrl,
> > > + .g_ctrl = v4l2_subdev_g_ctrl,
> > > + .s_ctrl = v4l2_subdev_s_ctrl,
> >
> > If adv7180 is currently *only* used by bridge/platform drivers that
> > also use the control framework, then you can remove
> > queryctrl/g/s_ctrl altogether.
>
> I'm not sure to undestand this point. I "grepped" for the adv7180 and it
> seem that I'm the only user of the adv7180 (sta2x11 VIP driver). In the
> VIP driver I don't use the control framework (there aren't controls), so
> I think these lines must be there. Am I wrong?

Correct. But once sta2x11 is converted to using the control framework, then
these lines can be dropped since no one else is using this subdevice driver.

> I think you are thinking at the "Inheriting Controls" section of the
> v4l2-controls.txt document. Right?

Right.

Regards,

Hans

>
>
> > > - ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG,
> > > state->hue); + ret = i2c_smbus_write_byte_data(client,
> > > ADV7180_HUE_REG,
> > > + ADV7180_HUE_DEF);
> >
> > It shouldn't be necessary to initialize the controls since
> > v4l2_ctrl_handler_setup does that for you already.
>
> Removed
>
>


\
 
 \ /
  Last update: 2012-07-11 16:42    [W:0.074 / U:0.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site