lkml.org 
[lkml]   [2012]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Subjectpull request: new wl18xx wireless driver for TI WiLink8 chips
From
Date
Hi John,

This is a big pull request intended for 3.6 that contains a new
mac80211-based driver for Texas Instruments' WiLink8 chip family[1].
The new driver is based on the existing wlcore module that is already
used by the wl12xx driver, and implements mostly the hardware-specific
parts and new features.

There is a bunch of fixes and small improvements in the wl12xx and
wlcore modules as well, but the vast majority of patches are the actual
inclusion of the new driver or changes in wlcore and wl12xx that are
related to it.

Thanks a lot to Arik Nemtsov for all the effort and help in putting the
wl18xx together! Thanks to Assaf Azulay also for all the
behind-the-scenes work needed to make this possible!

Please pull or let me know if there's any problem.

Cheers,
Luca.

[1] http://www.ti.com/ww/en/wtbu/wilink8/



The following changes since commit 2eb278e083549f4eb29838037004054b3b55df62:

mac80211: unify SW/offload remain-on-channel (2012-06-06 15:31:18 -0400)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git for-linville

for you to fetch changes up to bf34e68352ac9f8deae3e78c2825ac9fe373e73e:

Merge branch 'wl12xx-next' into for-linville (2012-06-08 16:43:19 +0300)

----------------------------------------------------------------

Arik Nemtsov (42):
wl18xx: create per-chip-family private storage
wl18xx: set the number of Tx descriptors
wl18xx: set normal/GEM Tx spare block counts
wl18xx: implement hw op for calculating hw block count per packet
wl18xx: implement hw op for setting blocks in hw_tx_desc
wl18xx: implement hw op for setting frame length in tx_hw_desc
wl18xx: define HW-rate translation elements/tables
wl18xx: add fw_status private data
wl18xx: set Rx block-size alignment quirk
wl18xx: implement hw op for getting rx buffer data alignment
wl18xx: implement hw op for getting rx packet data length
wl18xx: implement immediate Tx completion
wlcore/wl18xx: add hw op for setting Tx HW checksum
wlcore/wl18xx: add hw op for Rx HW checksum
wlcore: track current channel type per vif
wl18xx: send channel type to FW on role start
wl18xx: ipmlement ap_rate_mask hw op
wlcore: support peer MIMO rates
wlcore/wl18xx: enable MIMO/wide-chan rates in AP-mode rate config
wl18xx: set HT capabilities
wl18xx: add module param for overriding HT caps
wl18xx: read FW pc on recovery
wl18xx: disable FW log functionality
wl18xx: implement hw op to read PG version
wl18xx: init Tx-released index to 0 on HW init
wl18xx: don't upload NVS to FW
wl18xx: change board type enum according to new FW
wlcore/wl12xx/18xx: split fw_status struct into two
wlcore: fix sparse warnings related to static functions
wlcore: fix dynamic_ps_timeout time regression
wlcore: fixes for connection_loss_work
wl18xx: add dependency on mac80211
wlcore: remove duplicate BUG_ON during recovery
wlcore/wl12xx/wl18xx: introduce quirk to remove TKIP header space
wlcore/wl12xx/wl18xx: handle spare blocks spacial cases per arch
wlcore: add stop reason bitmap for waking/starting queues
wlcore: stop queues on Tx flush
wlcore/wl12xx/wl18xx: implement op_set_key per HW arch
wl18xx: allow FW-log by default for PG2.0
wl18xx: align wl18xx_conf_phy with FW variant and remove it
wl18xx: clean up phy module parameters
wlcore/wl12xx/wl18xx: make NVS file optional for wl18xx

Assaf Azulay (2):
wl18xx: change default tcp_checksum to false
wlcore: increase number of BA sessions to 3

Eliad Peller (9):
wlcore: use the original elp time in forced_ps mode
wlcore: use correct link for bcast/multicast frames
wlcore: flush before stopping AP
wlcore: set wl->ht_cap per-band
wlcore: flush tx on CHANGE_CHANNEL
wlcore: increase WL1271_EVENT_TIMEOUT
wl12xx: send beacon loss events to userspace
wl12xx/wl18xx: add erp protection IE to the beacon filter
wlcore: compare ssid_len before comparing ssids

Eyal Shapira (2):
wlcore: add support macros to easily add conf debugfs entries
wlcore: add debugfs control over rx interrupt pacing

Grant Erickson (1):
wl12xx: Add support for an external 26 MHz crystal source

Ido Reis (6):
wl18xx: fix PHY_INIT addresses mem size
wl18xx: support PG2 version of the chip
wl18xx: FW/PHY arguments added for PG2
wl18xx: PG2.0 HW Watch dog interrupt support
wl18xx: pad only last frame in aggregration buffer for PG2
wl18xx: update fw statistics

Igal Chernobelsky (1):
wlcore: modify bss loss parameters

Luciano Coelho (58):
wl18xx: add new module
wlcore_sdio/wl18xx: use SDIO revision number to identify wl18xx chips
wl18xx: add empty operations struct
wl18xx: add partition table
wl18xx: add register table
wl18xx: add identify chip operation
wl18xx: add some boot operations and hw-specific configurations
wl18xx: add trigger command and ack event operations
wl18xx: add hw_init operation
wl18xx: add runtime configuration parameters
wl18xx: add board type module argument
wl18xx: translate and write the board type to SCR_PAD2
wl18xx: read clock frequency and do top init accordingly
wlcore: rename wl12xx.h to wlcore_i.h
wlcore/wl12xx: move ref_clock and tcxo_clock elements to wl12xx
wlcore/wl12xx: move rx_mem_pool_addr element to wl12xx
wlcore/wl12xx: add plt_init op and move the code to wl12xx
wl18xx: add plt_init operation
wl18xx: change the low_band_component_type for HDK boards
wl18xx: add number of antennas and dc2dc type as module params
wl18xx: add module parameter to disable TCP checksum
wl18xx: derive the MAC address from the BD_ADDR in fuse ROM
wl18xx: add a module parameter to control 11a support
wlcore: add module parameter to dump SDIO reads and writes
wl18xx: copy the default configuration before checking the board_type
wl18xx: changed default board_type to HDK
wlcore: add space for private area when allocating fw_status
wl18xx: change low_band_component_type value for COM8
wlcore: reorder identify_chip and get_hw_info
wl18xx: disable MCS_13 for wl18xx PG 1.0
wlcore: update beacon and probe_resp templates when rates change
wlcore: use all AP basic rates as default
wlcore: abstract debugfs fw_stats to be handled by the lower drivers
wlcore: add debugfs macro to help print fw statistics arrays
wl12xx: implement fw status debugfs entries
wl18xx: implement fw status debugfs entries
wlcore: create private static_data area and add operation to parse it
wl18xx: print the PHY firmware version from the private static data
wlcore: print the interrupt status when recovery is triggered
wl18xx: don't use MIMO when ht_mode is set to wide
wlcore: use proper values for supported local rates
wl18xx: add module parameter to force SISO 20MHz
wl18xx: add power limit reference value to mac_and_phy settings
wl18xx: export low/high band component values as module params
wl18xx: export pwr_limit_reference_11_abg value as a module parameter
wlcore/wl12xx/wl18xx: move lower driver debugfs to a subdir
wlcore: increase aggregation buffer size by one page
wl18xx: increase tx_ba_win_size to 64
wl18xx: use new fw stats structures
wlcore/wl12xx/wl18xx: don't use TX align quirk for wl127x
wl18xx: add support to clear FW statistics
wlcore: export raw binary with the FW statistics in debugfs
wlcore/wl18xx/wl12xx: use u8 instead of bool for host_fast_wakeup_support
wlcore: use u8 instead of enum for bcn_filt_mode
wlcore/wl18xx: the conf structs must be packed so they can be exported
wlcore/wl18xx: export conf struct in a debugfs file
wl18xx: read configuration structure from a binary file
Merge branch 'wl12xx-next' into for-linville

Victor Goldenshtein (5):
wl12xx: fix fm_coex parameters configuration
wl18xx: fix fm_coex parameters configuration
wlcore: don't enable BET for high basic rates
wlcore: wait for roc complete only for the first roc command
wlcore: set channels 12-14 as pactive for sched scan

Yoni Divinsky (5):
wlcore: use psd_type indexing according to spec
wl12xx: set the irq polarity before loading the fw
wlcore: fix the CONF_TX_AC_ANY_TID to be 0xff
wlcore: do not send stop fwlog cmd if fw is hanged
wlcore: add role_id to all the sched_scan commands

drivers/net/wireless/ti/Kconfig | 1 +
drivers/net/wireless/ti/Makefile | 1 +
drivers/net/wireless/ti/wl12xx/Makefile | 2 +-
drivers/net/wireless/ti/wl12xx/acx.h | 237 ++++++++
drivers/net/wireless/ti/wl12xx/cmd.c | 8 +-
drivers/net/wireless/ti/wl12xx/debugfs.c | 243 ++++++++
drivers/net/wireless/ti/wl12xx/debugfs.h | 28 +
drivers/net/wireless/ti/wl12xx/main.c | 242 ++++++--
drivers/net/wireless/ti/wl12xx/wl12xx.h | 8 +
drivers/net/wireless/ti/wl18xx/Kconfig | 7 +
drivers/net/wireless/ti/wl18xx/Makefile | 3 +
drivers/net/wireless/ti/wl18xx/acx.c | 111 ++++
drivers/net/wireless/ti/wl18xx/acx.h | 291 +++++++++
drivers/net/wireless/ti/wl18xx/conf.h | 92 +++
drivers/net/wireless/ti/wl18xx/debugfs.c | 403 +++++++++++++
drivers/net/wireless/ti/wl18xx/debugfs.h | 28 +
drivers/net/wireless/ti/wl18xx/io.c | 60 ++
drivers/net/wireless/ti/wl18xx/io.h | 28 +
drivers/net/wireless/ti/wl18xx/main.c | 1462 +++++++++++++++++++++++++++++++++++++++++++++
drivers/net/wireless/ti/wl18xx/reg.h | 191 ++++++
drivers/net/wireless/ti/wl18xx/tx.c | 127 ++++
drivers/net/wireless/ti/wl18xx/tx.h | 46 ++
drivers/net/wireless/ti/wl18xx/wl18xx.h | 88 +++
drivers/net/wireless/ti/wlcore/acx.c | 8 +-
drivers/net/wireless/ti/wlcore/acx.h | 254 +-------
drivers/net/wireless/ti/wlcore/boot.c | 57 +-
drivers/net/wireless/ti/wlcore/boot.h | 1 +
drivers/net/wireless/ti/wlcore/cmd.c | 62 +-
drivers/net/wireless/ti/wlcore/cmd.h | 13 +-
drivers/net/wireless/ti/wlcore/conf.h | 93 ++-
drivers/net/wireless/ti/wlcore/debugfs.c | 390 ++++--------
drivers/net/wireless/ti/wlcore/debugfs.h | 87 +++
drivers/net/wireless/ti/wlcore/event.c | 24 +-
drivers/net/wireless/ti/wlcore/hw_ops.h | 78 +++
drivers/net/wireless/ti/wlcore/init.c | 3 +
drivers/net/wireless/ti/wlcore/main.c | 504 ++++++++--------
drivers/net/wireless/ti/wlcore/ps.c | 21 +-
drivers/net/wireless/ti/wlcore/rx.c | 11 +-
drivers/net/wireless/ti/wlcore/rx.h | 7 +-
drivers/net/wireless/ti/wlcore/scan.c | 52 +-
drivers/net/wireless/ti/wlcore/scan.h | 19 +-
drivers/net/wireless/ti/wlcore/sdio.c | 35 +-
drivers/net/wireless/ti/wlcore/tx.c | 185 ++++--
drivers/net/wireless/ti/wlcore/tx.h | 49 +-
drivers/net/wireless/ti/wlcore/wlcore.h | 70 ++-
drivers/net/wireless/ti/wlcore/{wl12xx.h => wlcore_i.h} | 44 +-
46 files changed, 4818 insertions(+), 956 deletions(-)
create mode 100644 drivers/net/wireless/ti/wl12xx/debugfs.c
create mode 100644 drivers/net/wireless/ti/wl12xx/debugfs.h
create mode 100644 drivers/net/wireless/ti/wl18xx/Kconfig
create mode 100644 drivers/net/wireless/ti/wl18xx/Makefile
create mode 100644 drivers/net/wireless/ti/wl18xx/acx.c
create mode 100644 drivers/net/wireless/ti/wl18xx/acx.h
create mode 100644 drivers/net/wireless/ti/wl18xx/conf.h
create mode 100644 drivers/net/wireless/ti/wl18xx/debugfs.c
create mode 100644 drivers/net/wireless/ti/wl18xx/debugfs.h
create mode 100644 drivers/net/wireless/ti/wl18xx/io.c
create mode 100644 drivers/net/wireless/ti/wl18xx/io.h
create mode 100644 drivers/net/wireless/ti/wl18xx/main.c
create mode 100644 drivers/net/wireless/ti/wl18xx/reg.h
create mode 100644 drivers/net/wireless/ti/wl18xx/tx.c
create mode 100644 drivers/net/wireless/ti/wl18xx/tx.h
create mode 100644 drivers/net/wireless/ti/wl18xx/wl18xx.h
rename drivers/net/wireless/ti/wlcore/{wl12xx.h => wlcore_i.h} (95%)

--
Cheers,
Luca.


[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2012-06-08 17:41    [W:0.083 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site