lkml.org 
[lkml]   [2012]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] staging:iio:magnetometer:ak8975: remove 'mode' attribute
Date
The raw data reading process (ak8975_read_axis) sets the
single measurement mode to take a sample and once the
conversion is completed the device enters into power-down
mode automatically, therefore there is no need to enable
a flag for this to happen.

Signed-off-by: Leed Aguilar <leed.aguilar@ti.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
---
drivers/staging/iio/magnetometer/ak8975.c | 73 -----------------------------
1 files changed, 0 insertions(+), 73 deletions(-)

diff --git a/drivers/staging/iio/magnetometer/ak8975.c b/drivers/staging/iio/magnetometer/ak8975.c
index 11bde3f..01b4b07 100644
--- a/drivers/staging/iio/magnetometer/ak8975.c
+++ b/drivers/staging/iio/magnetometer/ak8975.c
@@ -92,7 +92,6 @@ struct ak8975_data {
struct mutex lock;
u8 asa[3];
long raw_to_gauss[3];
- bool mode;
u8 reg_cache[AK8975_MAX_REGS];
int eoc_gpio;
int eoc_irq;
@@ -247,60 +246,6 @@ static int ak8975_setup(struct i2c_client *client)
return 0;
}

-/*
- * Shows the device's mode. 0 = off, 1 = on.
- */
-static ssize_t show_mode(struct device *dev, struct device_attribute *devattr,
- char *buf)
-{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ak8975_data *data = iio_priv(indio_dev);
-
- return sprintf(buf, "%u\n", data->mode);
-}
-
-/*
- * Sets the device's mode. 0 = off, 1 = on. The device's mode must be on
- * for the magn raw attributes to be available.
- */
-static ssize_t store_mode(struct device *dev, struct device_attribute *devattr,
- const char *buf, size_t count)
-{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ak8975_data *data = iio_priv(indio_dev);
- struct i2c_client *client = data->client;
- bool value;
- int ret;
-
- /* Convert mode string and do some basic sanity checking on it.
- only 0 or 1 are valid. */
- ret = strtobool(buf, &value);
- if (ret < 0)
- return ret;
-
- mutex_lock(&data->lock);
-
- /* Write the mode to the device. */
- if (data->mode != value) {
- ret = ak8975_write_data(client,
- AK8975_REG_CNTL,
- (u8)value,
- AK8975_REG_CNTL_MODE_MASK,
- AK8975_REG_CNTL_MODE_SHIFT);
-
- if (ret < 0) {
- dev_err(&client->dev, "Error in setting mode\n");
- mutex_unlock(&data->lock);
- return ret;
- }
- data->mode = value;
- }
-
- mutex_unlock(&data->lock);
-
- return count;
-}
-
static int wait_conversion_complete_gpio(struct ak8975_data *data)
{
struct i2c_client *client = data->client;
@@ -368,12 +313,6 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val)

mutex_lock(&data->lock);

- if (data->mode == 0) {
- dev_err(&client->dev, "Operating mode is in power down mode\n");
- ret = -EBUSY;
- goto exit;
- }
-
/* Set up the device for taking a sample. */
ret = ak8975_write_data(client,
AK8975_REG_CNTL,
@@ -465,19 +404,7 @@ static const struct iio_chan_spec ak8975_channels[] = {
AK8975_CHANNEL(X, 0), AK8975_CHANNEL(Y, 1), AK8975_CHANNEL(Z, 2),
};

-static IIO_DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, show_mode, store_mode, 0);
-
-static struct attribute *ak8975_attr[] = {
- &iio_dev_attr_mode.dev_attr.attr,
- NULL
-};
-
-static struct attribute_group ak8975_attr_group = {
- .attrs = ak8975_attr,
-};
-
static const struct iio_info ak8975_info = {
- .attrs = &ak8975_attr_group,
.read_raw = &ak8975_read_raw,
.driver_module = THIS_MODULE,
};
--
1.7.1


\
 
 \ /
  Last update: 2012-06-07 00:02    [W:0.069 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site