Commit 3b511201 (ARM: OMAP: rx51: Platform support for lis3lv02d accelerometer)
added support for lis3lv02d accelerometer.

The patch was still using OMAP_GPIO_IRQ which no longer exists.

Fix it by using gpio_to_irq().

Signed-off-by: Tony Lindgren <tony@atomide.com>

---

Here's this one fixed. Compile and boot tested only, I don't have
physical access to my n900 right now.

--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -144,7 +144,6 @@ static struct lis3lv02d_platform_data rx51_lis3lv02d_data = {
 	.release_resources = lis302_release,
 	.st_min_limits = {-32, 3, 3},
 	.st_max_limits = {-3, 32, 32},
-	.irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO),
 };
 #endif
 
@@ -1030,7 +1029,6 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = {
 	{
 		I2C_BOARD_INFO("lis3lv02d", 0x1d),
 		.platform_data = &rx51_lis3lv02d_data,
-		.irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO),
 	},
 #endif
 };
@@ -1056,6 +1054,10 @@ static int __init rx51_i2c_init(void)
 	omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
 	omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
 			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
+#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
+	rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO);
+	rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO);
+#endif
 	omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3,
 			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_3));
 	return 0;