lkml.org 
[lkml]   [2012]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/4] mtd: lpc32xx_slc: Select AMBA_PL08X in Kconfig
On Wed, Jun 27, 2012 at 05:51:12PM +0200, Roland Stigge wrote:
> From: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
>
> Since this driver depends on the amba pl08x dma driver, select it in Kconfig.
>
> Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
> Signed-off-by: Roland Stigge <stigge@antcom.de>
> ---
> drivers/mtd/nand/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> index de69978..a9e8b73 100644
> --- a/drivers/mtd/nand/Kconfig
> +++ b/drivers/mtd/nand/Kconfig
> @@ -417,6 +417,7 @@ config MTD_NAND_PXA3xx
> config MTD_NAND_SLC_LPC32XX
> tristate "NXP LPC32xx SLC Controller"
> depends on ARCH_LPC32XX
> + select AMBA_PL08X
> help
> Enables support for NXP's LPC32XX SLC (i.e. for Single Level Cell
> chips) NAND controller. This is the default for the PHYTEC 3250

Surely not? Drivers using DMA engine really should not depend on any
particular DMA engine implementation.


\
 
 \ /
  Last update: 2012-06-27 21:41    [W:0.072 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site